FleetMon R400N Bedienungsanleitung

USER MANUAL R400N

AIS Network Receiver

With Ethernet

R400N-MA-FMv02

2019-10-22

ENGLISH

R400N - FleetMon

CONTENTS

1 DOCUMENT ..........................................................................................3

1.1 About This Manual ....................................................................................... 3

2 GENERAL NOTICES .................................................................................3

3 INTRODUCTION .....................................................................................4

3.1 Background to AIS........................................................................................ 4

4 PARTS LIST...........................................................................................4

5 NETWORK AIS RECEIVER WITH ETHERNET ...................................................5

5.1 About the R400N ......................................................................................... 6

6 INSTALLATION ......................................................................................7

6.1 Mounting.................................................................................................... 7

6.2 Power Connection........................................................................................ 7

6.3 Connection to a Network .............................................................................. 7

7 AIS ANTENNA WITH MOUNTING BRACKET..................................................8

7.1 Antenna Installation..................................................................................... 9

8 OPERATION AND TROUBLESHOOTING......................................................10

8.1 No power LED is displayed .......................................................................... 10

8.2 Channel 1 and Channel 2 LEDs do not flash ................................................... 10

8.3 Ethernet LED.............................................................................................. 10

8.4 Restart device ........................................................................................... 10

9 SPECIFICATION....................................................................................11

9.1 Electrical................................................................................................... 11

9.2 Receiver ................................................................................................... 11

9.3 Physical.................................................................................................... 11

9.4 Antenna ................................................................................................... 12

10 COPYRIGHT ......................................................................................13

11 LIMITED WARRANTY ..........................................................................13

12 PRODUCT SUPPORT............................................................................13

R400N - FleetMon

1 DOCUMENT

1.1 About This Manual

This manual provides installation, operating instructions and fault-finding procedures for the equipment to

which it relates. This manual may also be made available in electronic Portable Document Format (PDF).

This is a printer friendly document, designed to be printed 2-sided as a booklet with A5 pages on A4 stock

paper.

2 GENERAL NOTICES

SAFETY: Make sure the power supply is switched off before you make any electrical connections to

the unit.

INSTALLATION: This equipment must be installed in accordance with the instructions provided in this

manual. Failure to do so could result in poor performance, personal injury and/or damage to your

vessel and/or connected equipment.

CABLES: The supplied cables should only be cut, shortened or lengthened by an appropriate

supplier.

COMPASS: The compass safe distance of this unit is 0.5 m or greater for 0.3° deviation.

In accordance with a policy of continual development and product improvement, hardware and software

may be upgraded from time to time, and future versions of equipment may therefore not correspond

exactly with this manual.

When necessary, upgrades to the product will be accompanied by updates or addenda to this manual.

Information contained in this manual is liable to change without notice.

Comar Systems Ltd. disclaims any liability for consequences arising from omissions or inaccuracies in this

manual and any other documentation provided with this product.

R400N - FleetMon

3 INTRODUCTION

3.1 Background to AIS

AIS is an Automatic Identification System. For improved safety and specifically for collision avoidance

reasons, vessels need to know the position, details and navigational intentions of other vessels within VHF

range.

IMO regulations covering most commercial vessels worldwide have been passed requiring that AIS

transponders are fitted to all commercial vessels over 300 GRT (Gross Registered Tonnage) on international

voyages.

The transponders use VHF frequencies to:

● Transmit details of their own vessel

● Receive details from other vessels or navigation aids within VHF range

4 PARTS LIST

Before proceeding with the installation of the R400N AIS station kit, check the contents of the box which

should include:

● The R400N AIS Receiver Unit

● Universal 100-250 V AC / 12 V DC Power Supply

● Network Cable

● CX4 AIS antenna

● Mounting bracket

● Coax Cable

R400N - FleetMon

5 NETWORK AIS RECEIVER WITH ETHERNET

R400N - FleetMon

5.1 About the R400N

The R400N is a dual channel AIS receiver unit with built in Ethernet and USB interfaces, designed

specifically for coastal monitoring of AIS equipped vessels.

Connected to an Ethernet Network, the device sends over the internet the received AIS data to a fixed IP

address. The device is already configured and ready to use.

Information transmitted from vessels fitted with AIS transponders includes:

• Name of Vessel

• Call Sign

• Type of Vessel

• Speed (SOG)

• Course (COG)

• Heading

• Position

• Navigational Status

• Vessel Dimensions

• MMSI Number

• IMO Number

• Draft

• Rate of Turn

• Size of Vessel

• Status

• Destination

• ETA

• Cargo

Note: Not all the above information is necessarily transmitted by each vessel.

R400N - FleetMon

6 INSTALLATION

6.1 Mounting

The R400N receiver can be mounted to a suitable bulkhead or shelf.

• Hint: Select a location away from excessive heat sources, avoid high levels of vibration and

shock. The device is not weather proof.

6.2 Power Connection

Fit the universal power supply with the correct adaptor for your local power. Plug the 2.1 mm jack into the

rear of the R400N and switch on the power.

• Hint: Alternatively the unit will accept 9-30 V dc from an alternative source capable of supplying

1 Amp. The centre pin is Positive.

6.3 Connection to a Network

The R400N is already configured and tested. As soon as the device is connected to the power and internet

connection the AIS data will be automatically forwarded to FleetMon. Check the reception with your

FleetMon account under the point "AIS stations". https://www.fleetmon.com/my/ais-stations

When connected to a network, the yellow LED on the network connection should be on. If no yellow LED is

shown, then the unit has not detected a link to another network device. The green LED will blink when

data is transmitted or received.

R400N - FleetMon

7 AIS ANTENNA WITH MOUNTING BRACKET

AIS antenna

Mounting bracket

Nut and Washer

R400N - FleetMon

7.1 Antenna Installation

A VHF antenna is included with the requested coax cable and mounting bracket for wall and mast

installation. Install the antenna outdoor and as high as possible. Connect the included coax cable with the

BNC connector to the AIS receiver and the UHF connector to the antenna.

Shore based reception is governed by local terrain, however an open view to the sea with an antenna

mounted in the clear at a height of approximately 20 metres will achieve 25 miles plus.

● Hint: The antenna connector type is BNC on the device side and UHF(f) on the antenna side. 50Ω

● Hint: Mount the antenna with a relatively clear view of the horizon. Large obstructions that

might shade the antenna should be avoided.

● Hint: The higher the antenna above sea level, the greater the range.

Add the antenna to the top hole of the

mounting bracket and fix the antenna with the

washer and nut. Use tools to fix it, so that the

antenna does not become loose. A loose

antenna can destroy the antenna or mounting

bracket.

With the clamps and nuts, you install the

mounting bracket to a pole or pipe, horizontal or

vertical. Or use the mounting bracket only for a

wall installation (screws are not included). The

antenna must always installed vertically.

R400N - FleetMon

8 OPERATION AND TROUBLESHOOTING

Operation of the R400N unit is fully automatic and only requires power, VHF and network cable connection.

On powering up the unit:

● The green LED marked ON should illuminate

● The Channel LEDs should come on briefly, then go off

● The Channel A and B LEDs should flash momentarily when information from nearby transceivers is

received

Data is then output for visual or textual viewing on FleetMon.com.

8.1 No power LED is displayed

● Check the power supply and that the unit is connected correctly to a 12 or 24 V dc supply

● Check that the polarity of the supply is correct. The center pin of the 2.1mm jack is positive

8.2 Channel 1 and Channel 2 LEDs do not flash

● Check that a VHF antenna is fitted and correctly connected

● Check that the antenna is correctly positioned, i.e. at a suitable location to visibly ‘see’ vessels

8.3 Ethernet LED

Check the Ethernet Link LED on the R400N device. Is it solid lit? If not, there is not a valid network

connection and it will not be possible to discover the device.

8.4 Restart device

Turn off the device by unplugging the power connector and wait a moment so that the device can release

the voltage. Connect the power supply again and check the device.

● Hint: Many problems can be solved by simply restarting the device.

Inhaltsverzeichnis

Andere FleetMon Empfänger Handbücher

FleetMon

FleetMon AIS Station Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung