FLORABEST FHM 38 A1 Bedienungsanleitung

Hand-PusH Lawnmower FHm 38 a1

HandrasenmäHer

Originalbetriebsanleitung

Hand-PusH Lawnmower

Translation of the original instructions

IAN 104216

104216_flo_Handrasenmäher_cover_IE.indd 2 10.11.14 15:57

GB / IE Translation of the original instructions Page 4

DE / AT / CH Originalbetriebsanleitung Seite 11

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the

device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

104216_flo_Handrasenmäher_cover_IE.indd 3 10.11.14 15:57

14 7

12 9

811

GB IE

Intended Purpose

The device is intended only for mowing

lawns and grass areas in the domestic

domain.

This equipment is not suitable for commer-

cial use. Commercial use will invalidate the

guarantee.

The operator or user is responsible for acci-

dents or injury to other people or damage

to their property.

The manufacturer shall not be liable for

damages caused by improper use or incor-

rect operation.

General description

The illustrations can be found

on the front foldout page.

Scope of Delivery

Carefully unpack the appliance and check

that it is complete. Dispose of the packag-

ing material correctly.

- Mower

- Handle top

- Handle bottom

- 2 cross bars

- 4 screws

- 4 wing nuts

- Machine key

- Tool holder with metal strip (feeler

gauge)

- Instruction manual

Functionality

The hand-push lawn mower has a reel

blade cylinder containing 5 bow-shaped

blades. Its cutting height is innitely adjust-

able, and its wheels turn smoothly.

Read the sections below to learn more

about each operating element’s function.

Content

Introduction .................................4

Intended Purpose.........................4

General description......................4

Scope of Delivery..............................4

Functionality .....................................4

Summary .........................................5

Technical Specications ................5

Safety Instructions........................5

Symbols in the Instructions..................5

Symbols on the device.......................5

General Safety Information.................5

Fitting the Handle.........................6

Adjusting the Cut Height...............7

Working Instructions ....................7

Cleaning and Maintenance...........7

Cleaning..........................................7

Adjusting the Cutting Clearance..........8

Storage........................................8

Disposal/Environmental

Protection ....................................8

Guarantee ...................................8

Service-Center..............................9

Importer ......................................9

Spare parts/Accessories.............10

Exploded Drawing .......................19

Introduction

Congratulations on the purchase of

your new device. With it, you have

chosen a high quality product.

The operating instructions constitute part of

this product. They contain important infor-

mation on safety, use and disposal.

Before using the product, familiarise your-

self with all of the operating and safety

instructions. Use the product only as de-

scribed and for the applications specied.

Keep this manual safely and in the event

that the product is passed on, hand over

all documents to the third party.

GB IE

Summary

1 Handle top

2 2 cross bars

3 Machine key

4 Metal strips (feeler gauge)

5 Machine holder

6 Handle bottom

7 Handle holder

8 Blade cylinder

9 Castors

10 2 hexagon bolts for adjusting the

blades

11 Sub-blade

12 2 locknuts

13 2 wheels

14 2 adjustable handles and scales

for height adjustment

15 4 screws and 4 wing nuts for the

handle xing

16 Holder bolts

Technical Specications

Serial no....

201411000001-201501029273

Blade width..................................38 cm

Cut height ............................ 14 - 43 mm

Number of blades................................5

Weight ....................................... 8.5 kg

Safety Instructions

Symbols in the Instructions

Warning signs with informa-

tion for the prevention of in-

juries or damage property.

Mandatory signs (instead of the

exclamation mark, the command is

explained) with information for the

prevention of damage.

Information signs with information for

better handling of the machine.

Symbols on the device

Caution!

Read the operating instructions ca-

refully.

Risk of injury from parts being

thrown up.

Keep nearby people away from the

mower.

Caution – sharp cutting blade!

Keep feet and hands away. Risk of

injury!

Caution! Risk of injury by rotating

blade cylinder!

Keep hands and feet away from

the openings when operating the

mower.

Blade width

General Safety Information

Observe the noise protection and

local regulations.

Read the instructions for use care-

fully. Familiarise yourself with the

adjustment settings and how to use

the machine correctly. In case of

uncertainties, allow yourself to be

given instruction concerning the use

of the device.

GB IE

Caution: to avoid accidents and inju-

ries:

• Children and young people under the

age of 16 and people who are not

familiar with these instructions must not

work with the machine.

• Never turn the machine on when peo-

ple and particularly children or animals

are nearby.

• People with motor disorders are not to

operate the machine without supervision.

• Slip-resistant shoes and long trousers

must always be worn during mowing.

Do not mow barefoot or in light sandals.

Loose clothing, jewellery or long hair

may get caught in the moving parts.

Wearing suitable clothing reduces the

risk of injuries.

• When working, ensure a rm foothold,

particularly on slopes. Always work

across the slope, never up or down-

wards. Take particular care when chang-

ing the direction of travel on the slope.

Do not work on excessively steep slopes.

• When switching the machine on, avoid

feet or hands being trapped between

the moving blades and the xed parts

of the machine. There is a risk of injury.

• Never carry the machine by the blade

cylinder. Risk of injury from cuts.

• Pay attention, be aware of what you

are doing and take the utmost care

when working. Do not use the device if

you are tired or you are under the inu-

ence of drugs, alcohol or other medica-

tion. A moment of inattention can result

in serious injuries.

• Never use the device with damaged

safety devices such as protective covers

and do not manipulate them

• Do not work with the device if there is a

risk of lightning strike. Danger of elec-

tric shock

Caution! To avoid damaging the

machine and potential injury as a

consequence:

• Check the terrain on which the machine

is used and remove stones, sticks, wires

or other foreign bodies that may be

picked up and ung outwards.

• Ensure that the machine is in a safe op-

erating condition. Replace worn or dam-

aged parts.

• Protect the machine from the effects of

weathering (damp, frost).

Fitting the Handle

1. Press both ends of the handle bot-

tom (6) together and insert them

vertically through the handle

holder (7) on the machine.

2. Push the holes at the ends over

the two holder bolts (16).

3. Use the screws and wing nuts

from the package to mount the

top part of the handle (1) on the

two cross bars (2).

4. Use the screws and wing nuts

from the package to mount the

cross bars (2) on the bottom part

of the handle (6).

The two centre bars can be secured

in two positions to adjust the handle

bar to your height.

5. Mount the tool holder (5) from

the package to the bottom part of

the handle (6) and snap on the

machine key (3) to it.

GB IE

Adjusting the Cut Height

The cut height is innitely adjustable from

14–43 mm:

1. Loosen the locknuts (12) on both

sides of the machine.

2. Place one foot on the castors (9)

and set the desired cut height with

both hands on the adjusting han-

dles (14).

Ensure that the machine is set to

the same height on both sides.

3. Retighten the locking screws (12).

Set the cut height no lower than to

where the blade cylinder does not

touch the ground even where it is

uneven.

Working Instructions

Before each use, check the machine

for obvious defects, such as loose,

worn or damaged parts. Check that

all nuts, bolts and screws are sitting

rmly.

Regular mowing stimulates the stronger

formation of leaves in the grass as well as

allowing weeds to die off at the same time.

Thus, the lawn becomes thicker each time it

is mowed and a lawn with even resilience

is produced.

• Run the machine at walking pace, in

strips that are a straight as possible.

For seamless mowing, the strips should

always overlap by a few centimetres.

• On slopes, always work across the

slope.

• For the rst cut of the season, choose

a high the cut height and reduce the

height to around 20 mm for the subse-

quent cuts.

Cleaning and

Maintenance

Have work that is not de-

scribed in these instructions

carried out by one of our

authorised customer service

centres. Use only original

components. In this way you

avoid damage to the appli-

ance and possible injury to

people.

Wear gloves when dealing with the

blades. Risk of cuts.

• Check covers and safety devices for

damage and check that these are sitting

correctly. Replace if necessary.

Cleaning

Neither hose down nor use running

water to clean the mower. Risk of

electric shock.

• Always keep the machine clean. For

cleaning, use a brush or cloth, but no

cleaning agents or solvents.

• After mowing, remove any plant

remains stuck to the wheels and the

blade area.

• Rub the blades with an oil rag or spray

them with a metal maintenance spray.

• Due to the special cutting geometry,

the blade cylinder blades cannot be

re-sharpened. If necessary, the blade

cylinder and sub-blade must therefore

be replaced as a set. Have a specialist

workshop carry out the installation of

the blade cylinder.

GB IE

Adjusting the Cutting Clearance

Whilst setting the device, avoid

hands and feet from getting

stuck between the movable

knives and stationary parts of

the device. Risk of injury!

The blade cylinder blades must be adjusted

if the grass is no longer being cut evenly

and cleanly.

1. Remove the machine key (3) and

metal strips (feeler gauge) (4) from

the machine holder (cf. 5).

2. Push the metal strip (4) between a

blade cylinder (8) blade and the

sub-blade (11).

3. Turn the hex bolts (10) to the right

then to the left on the machine,

in small steps in the clockwise

direction until the metal strip sticks

slightly.

4. Check the setting by turning the

blade cylinder. None of the blade

cylinder blades should be in con-

tact and grinding on the sub-blade.

5. Return the machine key (3) and the

metal strip (feeler gauge) (4) to the

tool holder (cf. 5).

If it is no longer possible to adjust

the cutting clearance, the blade

cylinder and sub-blade must be re-

placed as a set.

Storage

• Keep the machine dry and out of reach

of children.

For space-saving storage, loosen the

wing nuts and fold the handle bar

together.

Disposal/Environmental

Protection

Recycle the device, accessories and packag-

ing in an environmentally friendly manner.

• Machines do not belong in domestic

waste. Take the machine to a recycling

point. The plastic and metal components

used can be separated by type and there-

fore recycled. Ask your dealer about this.

• Do not dispose of cut grass in the dustbin;

use it for composting or spread it as a

mulch layer under shrubs and trees.

Guarantee

Dear Customer,

This equipment is provided with a 3-year

guarantee from the date of purchase.

In case of defects, you have statutory rights

against the seller of the product. These statu-

tory rights are not restricted by our guaran-

tee presented below.

Terms of Guarantee

The term of the guarantee begins on the

date of purchase. Please retain the original

receipt. This document is required as proof

of purchase.

If a material or manufacturing defect occurs

within three years of the date of purchase

of this product, we will repair or replace –

at our choice – the product for you free of

charge. This guarantee requires the defec-

tive equipment and proof of purchase to be

presented within the three-year period with

a brief written description of what consti-

tutes the defect and when it occurred. If the

defect is covered by our guarantee, you will

receive either the repaired product or a new

product. No new guarantee period begins

on repair or replacement of the product.

GB IE

Guarantee Period and Statutory

Claims for Defects

The guarantee period is not extended by

the guarantee service. This also applies for

replaced or repaired parts. Any damages

and defects already present at the time of

purchase must be reported immediately af-

ter unpacking. Repairs arising after expiry

of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully pro-

duced in accordance with strict quality

guidelines and conscientiously checked

prior to delivery.

The guarantee applies for all material and

manufacturing defects. This guarantee does

not extend to cover product parts that are

subject to normal wear and may therefore

be considered as wearing parts (e.g. blade

cylinder and sub-blade) or to cover damage

to breakable parts (e.g. switches, batteries).

This guarantee shall be invalid if the prod-

uct has been damaged, used incorrectly or

not maintained. Precise adherence to all of

the instructions specied in the operating

manual is required for proper use of the

product. Intended uses and actions against

which the operating manual advises or

warns must be categorically avoided.

The product is designed only for private

and not commercial use. The guarantee

will be invalidated in case of misuse or

improper handling, use of force, or inter-

ventions not undertaken by our authorised

service branch.

Processing in Case of Guarantee

To ensure quick handling of you issue,

please follow the following directions:

• Please have the receipt and identica-

tion number (IAN 104216) ready as

proof of purchase for all enquiries.

• Please nd the item number on the rat-

ing plate.

• Should functional errors or other de-

fects occur, please initially contact the

service department specied below by

telephone or by e-mail. You will then

receive further information on the pro-

cessing of your complaint.

• After consultation with our customer

service, a product recorded as defective

can be sent postage paid to the service

address communicated to you, with the

proof of purchase (receipt) and speci-

cation of what constitutes the defect

and when it occurred. In order to avoid

acceptance problems and additional

costs, please be sure to use only the ad-

dress communicated to you. Ensure that

the consignment is not sent carriage

forward or by bulky goods, express or

other special freight. Please send the

equipment inc. all accessories supplied

at the time of purchase and ensure ad-

equate, safe transport packaging.

Service-Center

Service

Great Britain

Tel.: 0871 5000 720

(£ 0.10/Min.)

E-Mail:

[email protected]

IAN 104216

Service

Ireland

Tel.: 1890 930 034

(0,08 €/Min. (peak))

(0,06 €/Min. (off peak))

E-Mail: [email protected]

IAN 104216

Importer

Please note that the following address is

not a service address. Please initially con-

tact the service centre specied above.

Grizzly Tools GmbH & Co. KG

Stockstädter Straße 20

63762 Großostheim, Germany

www.grizzly-service.eu

GB IE

Spare parts/Accessories

Spare parts and accessories can be obtained at

www.grizzly-service.eu

If you do not have internet access, please contact the Service Centre via telephone

(see “Service-Center” page 9). Please have the order number mentioned below ready.

Pos. Pos. Description Order No.

Instruction Exploded

Manual Drawing

1 39 Handle top (high bar) 76101134

2 37 2 cross bars 76101133

3-5 41-43 Machine key + feeler gauge

+ machine holder 76101137

6 34 Handle bottom (low bar) 76101132

13 1-3 Wheel, complete 76101131

15 35-36 Screw set (4 screws and 4 wing nuts

for the handle xing) 76101136

4 Spring ring for wheel mounting 91098940

40 PVC sheathing for handle top

(high bar) 76101135

Optionally available:

Description Order No.

Grass collection box 76101130

Andere Handbücher für FHM 38 A1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere FLORABEST Rasenmäher Handbücher

FLORABEST

FLORABEST FRM 1800 A1 Kurzanleitung

FLORABEST

FLORABEST FRMA 36 / 2 B1 Bedienungsanleitung

FLORABEST

FLORABEST FRM 1200 D3 Kurzanleitung

FLORABEST

FLORABEST FRM 1800 A1 Betriebsanleitung

FLORABEST

FLORABEST FBM 135 A1 Betriebsanleitung

FLORABEST

FLORABEST FRMA 36 / 1 B1 Bedienungsanleitung

FLORABEST

FLORABEST FBM 135 A1 Bedienungsanleitung

FLORABEST

FLORABEST FBM 450 A1 Bedienungsanleitung

FLORABEST

FLORABEST 297536 Bedienungsanleitung

FLORABEST

FLORABEST FHM 38 A1 Betriebsanleitung

FLORABEST

FLORABEST FBM 190 A1 Bedienungsanleitung

FLORABEST

FLORABEST FRM 1200 A1 Betriebsanleitung

FLORABEST

FLORABEST FRM 1200 D3 Bedienungsanleitung

FLORABEST

FLORABEST FBM 450 B2 Bedienungsanleitung

FLORABEST

FLORABEST FRM 1800 A1 Betriebsanleitung

FLORABEST

FLORABEST FRM 1200 D3 Bedienungsanleitung

FLORABEST

FLORABEST IAN 79723 Betriebsanleitung

FLORABEST

FLORABEST FHM 38 A1 Bedienungsanleitung

FLORABEST

FLORABEST FRM 1800 A1 Bedienungsanleitung

FLORABEST

FLORABEST FBM 135 A1 Betriebsanleitung

FLORABEST

FLORABEST FBM 450 B2 Bedienungsanleitung

FLORABEST

FLORABEST FRM 1800 B2 Bedienungsanleitung

FLORABEST

FLORABEST FBM 575 B1 Betriebsanleitung

FLORABEST

FLORABEST FBM 575 A1 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung