FlowLine EchoSpan LU80-5101 Bedienungsanleitung

We do Your Level Best

Model: LU80-51_1

EchoSpan®

Quick Start

QS300310 Rev. B

Made in USA

Warranty

Flowline warrants to the original purchaser of its products that such products will be

free from defects in material and workmanship under normal use and service in

accordance with instructions furnished by Flowline for a period, which is equal to the

shorter of one year from the date of purchase of such products or two years from the

date of manufacture of such products. Flowline's obligation under this warranty is

solely and exclusively limited to the repair or replacement, at Flowline's option, of the

products or components, which Flowline's examination determines to its satisfaction to

be defective in material or workmanship within the warranty period. Flowline must be

notified pursuant to the instructions below of any claim under this warranty within thirty

(30) days of any claimed lack of conformity of the product. Any product repaired or

replaced under this warranty will be warranted only for the remainder of the original

warranty period.

Returns

Products cannot be returned to Flowline without Flowline's prior authorization. To

return a product that is thought to be defective, go to www.flowline.com, and submit a

customer return (MRA) request form and follow the instructions therein. All warranty

and non-warranty product returns to Flowline must be shipped prepaid and insured.

Flowline will not be responsible for any products lost or damaged in shipment.

Limitations

This warranty does not apply to products which: 1) are beyond the warranty period or

are products for which the original purchaser does not follow the warranty procedures

outlined above; 2) have been subjected to electrical, mechanical or chemical damage

due to improper, accidental or negligent use; 3) have been modified or altered; 4)

anyone other than service personnel authorized by Flowline have attempted to repair;

5) have been involved in accidents or natural disasters; or 6) are damaged during

return shipment to Flowline. Flowline reserves the right to unilaterally waive this

warranty and dispose of any product returned to Flowline where: 1) there is evidence

of a potentially hazardous material present with the product; or 2) the product has

remained unclaimed at Flowline for more than 30 days after Flowline has dutifully

requested disposition. This warranty contains the sole express warranty made by

Flowline in connection with its products. ALL IMPLIED WARRANTIES, INCLUDING

WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. The remedies of

repair or replacement as stated above are the exclusive remedies for the breach of

this warranty. IN NO EVENT SHALL FLOWLINE BE LIABLE FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING PERSONAL OR

REAL PROPERTY OR FOR INJURY TO ANY PERSON. THIS WARRANTY

CONSTITUTES THE FINAL, COMPLETE AND EXCLUSIVE STATEMENT OF

WARRANTY TERMS AND NO PERSON IS AUTHORIZED TO MAKE ANY OTHER

WARRANTIES OR REPRESENTATIONS ON BEHALF OF FLOWLINE. This warranty

will be interpreted pursuant to the laws of the State of California. If any portion of this

warranty is held to be invalid or unenforceable for any reason, such finding will not

invalidate any other provision of this warranty.

Technical Support

For complete product documentation, video training, and technical

support, go to www.flowline.com.

For phone support, call 562-598-3015 from 8am to 5pm PST, Mon - Fri.

(Please make sure you have the Part and Serial number available.)

Flowline Inc. 10500 Humbolt St, Los Alamitos, CA 90720

10500 Humbolt Street, Los Alamitos, CA 90720 USA

Tel: 562.598.3015 Fax: 562.431.8507 www.flowline.com

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

We do Your Level Best

Select Fail Safety Output

We Do Your Level Best

Thank you for purchasing Flowline’s EchoSpan®. The EchoSpan® provides a 4-20 mA

analog output with integrated LCD and three push-button configuration. This Quick

Start includes everything you’ll need to get the transmitter up and running. For

complete information, please refer to EchoSpan® documentation located at

www.flowline.com.

Components

Depending on the model shipped to you, you should have the components shown

below. Both components – the EchoSpan® and Viton® gasket – are required to install

the EchoSpan®.

Select Fail Safety Output

In the event the transmitter does not receive an

echo, the Select Fail Safety Output setting can be

set either to 22mA, 21mA, 20mA or HOLD the last

value to achieve the desired fail-safe condition.

During fail-safe, the display will read LOST.

1) Enter the configuration menu

(as discussed previously),

2) Select SAFE from the menu,

3) Select an output option, such as 22mA,

21mA, 20mA, 4mA, or HOLD, and

4) Select EXIT to return to the Configuration menu.

Reverse 4-20 mA Signal

The transmitter allows you to switch the 4-20 mA value at the top and bottom of the

application. By default, 4mA is configured as the bottom and 20mA is configured as

the top. The transmitter displays this as NORM. Follow these instructions to reverse

this setting:

1) Enter the configuration menu

(as discussed previously),

2) Select TANK from the menu,

3) Select Rev MA from the

menu,

4) Then, select Rev from the

menu, and

5) Select EXIT to return to the

Configuration menu.

Troubleshooting

If you face any issues not addressed in this quick start, please refer to the EchoSpan®

Manual located on Flowline website at www.flowline.com.

EchoSpan®

LU80-5101

LU80-5161

Viton® gasket

Part#: 200128 (1”)

Welcome to the EchoSpan®Quick Start

The EchoSpan® Quick Start is meant to show some of the more common

setup solutions to getting the EchoSpan® up and running quickly. If you

run into an issue that is not addressed here or wish to install or set up with

a non-standard configuration, please address the EchoSpan® Manual or

refer to the Flowline website at www.flowline.com.

Reverse 4-20 mA Signal

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

We do Your Level Best

Setting Units

Riser Mounting

Side Mounting

Set Units

The transmitter displays information in inches,

feet, centimeters, meters, or percentages.

This can be displayed to represent the amount

of air or the amount of liquid in a tank.

Air Display Mode shows the distance from the

bottom of the sensor to the liquid surface. Liquid

Display mode show the distance from the liquid

surface to the bottom of the tank.

Follow these instructions to set how units are displayed:

1) Enter the configuration menu (as

discussed previously),

2) Select UNITS from the menu,

3) Select the type of unit or the type of

DISPLAY you desire, and

4) Select EXIT to return to the Configuration

menu.

Set Height and Fill Height

This setting customizes the reading for your installation. Follow these instructions to

set the height and fill height for your tank:

1) Enter the configuration menu (as discussed previously),

2) Select TANK from the menu,

3) Select HEIGHT. Use the UP and DOWN buttons to set the height of your tank. Then,

hold down the SELECT button to save this setting,

4) Select FILL-H for the fill

height. Use the UP and

DOWN buttons to set the fill

height of your tank. Then, hold

down the SELECT button to

save this setting, and

5) Select EXIT to return to the

Configuration menu.

Mounting the Transmitter

The Transmitter should always be mounted perpendicular to the liquid surface and

installed using the provided Viton® mounting gasket. Insure that there are no

restrictions or obstacles in the path of the ultrasonic signal. Always use fittings, with

thin wall mounting structures that isolate the transducer. This will provide the best

performance over the lifetime of the product. An instructional video on this is also

available on the website.

The LU80 has a 1” NPT or G fitting and requires more care in mounting to reduce any

coupling of the ultrasonic signal to the mounting structure. The following fittings are

recommended:

For installations in existing 2” fittings:

Use LM52-1400 2” thread x 1” thread adapter. (An adapter with

an air gap around the 1 inch threads as shown is

recommended)

For installations in plastic tanks:

1) Use a Bulkhead fitting LM52-1890 1” Bulkhead

fitting,

2) Use a Bulkhead fitting LM52-2890 in combination

with LM52-1400 or,

3) Weld a plastic 1” half coupler to tank top.

For installations in metal tanks:

1) Use the recommended bulkhead fittings as shown above

or a LM52-1850 1” Flange. The flange fitting must have a

riser for the threaded section. Drilling and tapping a blind

flange is not recommended.

2) While installations directly into a 1”metal fitting are

not recommended, acceptable results may be obtained

if the 1” fitting is a half coupling in form and the outer

diameter of the coupler is tightly wrapped in vinyl tape to

dampen vibrations.

For installations in open tanks and sumps:

1) Use Flowline's LM50-1001-1 side mount bracket,

which includes a 2” x 1” thread reducer bushing.

Setting Fill Height

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

We do Your Level Best

TransmitterInterface

Mounting with a Stand Pipe:

A standpipe may be used to dampen turbulence,

separate surface foam from the point of measurement

or increase performance in heavy vapor. Select a 2”

pipe and attach the transmitter with a coupling and

reducer bushing. The pipe length should run the

measurement span and the bottom of the pipe should

remain submerged at all times to prevent foam from

entering the pipe. Cut the bottom end of the pipe at

45° and drill a 1/4”pressure equalization hole high in

the dead band. The pumps should not drive liquid past

the open end of the standpipe which causes the liquid

in the pipe to oscillate. Mounting with a Standpipe

IMPORTANT MOUNTING GUIDELINES:

1) Never mount the sensor at an angle.

2) Liquid should never enter the dead band.

3) Mount at least 3” from the side wall.

4) Never mount in a vacuum.

5) Do not obstruct the sensor’s 2” beam width.

6) Isolate air gaps between inner and outer threads for best performance.

Wiring the Transmitter

The following wiring diagrams can be used when wiring the transmitter.

Some final notes on safety:

 Where personal safety or significant property damage can occur due to

a spill, the installation must have a redundant backup safety system.

 Wiring should always be completed by a licensed electrician.

 Supply voltage should never exceed 28 VDC.

 The sensor must be chemically compatible with the application.

 Design a fail-safe system for possible sensor and/or power failure.

 Never use the sensor in classified hazardous

environments.

Configuring the Transmitter

The transmitter features a non-volatile memory,

and can be configured prior to installation. Your

configuration will not be lost when the transmitter is

powered down. Before configuring, be sure to have

the following information:

Height. This is the distance from the transducer

face to the bottom of the tank.

Fill Height (Fill-H). This is the distance from the

highest level of liquid to the bottom of the tank

Configuration Menu

The transmitter is configured with the three buttons

on the transmitter’s face (UP, DOWN and SELECT)

and the transmitter's LCD. To access the

transmitter's

configuration menu, simply hold down the SELECT

button for five seconds or until the menu is

displayed.

When the SELECT button is released, the display

menu will begin to scroll through the uppermost level

of the configuration menu.

When the menu scrolls to an item you wish to configure, simply press the SELECT

button again when that item appears. Once you've made your configuration changes,

press SELECT again when “Exit” appears to scroll through the options and once

more while RUN appears in the display. This will return the transmitter to its

operational mode.

Height and Fill Height

Wiring Schematic for Flowline DataView L155

Wiring Schematic for Typical PLC

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Spec Tech Industrial Electric

www.spectechind.com

888-773-2832

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FlowLine Sender Handbücher

FlowLine

FlowLine EchoPulse LR10 Series Bedienungsanleitung

FlowLine

FlowLine EchoPod UG06 Series Bedienungsanleitung

FlowLine

FlowLine EchoPod DL34 Series Bedienungsanleitung

FlowLine

FlowLine EchoTouch US03 Series Bedienungsanleitung

FlowLine

FlowLine EchoWave LG10 Series Bedienungsanleitung

FlowLine

FlowLine EchoSpan LU80 series Bedienungsanleitung

FlowLine

FlowLine EchoPod UG01-03 Bedienungsanleitung

FlowLine

FlowLine EchoSonic II Bedienungsanleitung

FlowLine

FlowLine EchoSonic II LU27 Series Bedienungsanleitung

FlowLine

FlowLine EchoSafe XP88 Bedienungsanleitung

FlowLine

FlowLine Ricochet LA15 Bedienungsanleitung

FlowLine

FlowLine EchoBeam LR80 Series Bedienungsanleitung

FlowLine

FlowLine EchoSonic II Series Bedienungsanleitung

FlowLine

FlowLine EchoPro LR11 Series Bedienungsanleitung

FlowLine

FlowLine LD31-S301 Series Bedienungsanleitung

FlowLine

FlowLine EchoPod UG06 Series Bedienungsanleitung

FlowLine

FlowLine EchoPod UG03 Series Bedienungsanleitung

FlowLine

FlowLine LU30 Bedienungsanleitung

FlowLine

FlowLine EchoSpan LU80 series Bedienungsanleitung

FlowLine

FlowLine EchoTouch US01 Series Bedienungsanleitung

FlowLine

FlowLine EchoSafe XP88 Bedienungsanleitung

FlowLine

FlowLine MiniMe LU12 Bedienungsanleitung

FlowLine

FlowLine EchoTouch US12 Series Bedienungsanleitung

FlowLine

FlowLine EchoPro LR11 Series Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung