VYPR
USER MANUAL
ASSEMBLY &MOUNTING INSTRUCTIONS
6
UNIVERSAL BRACKET Unbox hardware and place on flush, stable surface. Take extra
caution, ensuring the LED array does not come in contact with
sharp objects or force that may damage the diodes.
1......... Insert power cable into appropriate receptacle on the power
supply.
2........ Connect fixture cable to appropriate power supply receptacle.
3........ If connecting VYPR to a dimming system or controller, visit
fluence.science/support/
4........ If desired, the fourth cable can be connected to a remote
control system. Otherwise, cut close to power supply housing.
5........ For square, unistrut, or pipe bracket, pinch the sides of your
mounting bracket and insert the ends down into the gaps of
the fixture’s heat sink. Release bracket and allow it to “catch”
the inside of the heat sink. If you are using universal bracket,
simply insert one end of the bracket in through a gap in the
heat sink, thread it through to the other side of the heat sink
and rotate it into correct position.
5........ Attach to bracket chain or aircraft cable or other mounting
cabling as desired.
6........ Plug power cable into power source.
For detailed instructions for assembling and mounting your
Fluence lighting fixture, please see video tutorials
at fluence.science/support/
How to apply your vinyl-cut Fluence sticker:
1......... Clean and dry the surface where the sticker will be applied.
Air and surface temperature should be between 40° and 90° F.
2........ Remove backing sheet to expose adhesive and apply sticker
to desired surface.
3........ Starting from the center and working outward, squeegee
pre-masked surface with a credit card to remove air bubbles.
4........ Allow adhesive to bond approximately 15 minutes.
5........ Remove pre-mask from sticker at a 45° angle, keeping it as
close to the sticker as possible. If lettering is coming up with
pre-mask, re-squeegee before attempting to remove.
Last, and most important, please recycle all packaging
material. Future generations will thank you.
UNISTRUT, PIPE &
SQUARE BRACKETS
