Fluke 317 Bedienungsanleitung

PN 4092877

September 2011

notice. All product names are trademarks of their respective companies.

317/319

Clamp Meter

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for one

year from the date of purchase. This warranty does not cover fuses, disposable

batteries, or damage from accident, neglect, misuse, alteration, contamination,

or abnormal conditions of operation or handling. Resellers are not authorized to

extend any other warranty on Fluke’s behalf. To obtain service during the warranty

period, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or limitation

of an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation Fluke Europe B.V.

P.O. Box 9090 P.O. Box 1186

Everett, WA 98206-9090 5602 BD Eindhoven

U.S.A. The Netherlands

11/99

Introduction ........................................................... 1

How to Contact Fluke............................................ 1

Safety Information................................................. 2

Symbols ................................................................ 5

Specications........................................................ 6

General Specications...................................... 6

Electrical Specications.................................... 7

Software Specications .................................. 10

Environmental Specications.......................... 10

The Product......................................................... 11

Table of Contents

Title Page

317/319

Users Manual

Clamp Meter

Introduction

The Fluke 317 and 319 are hand-held, battery-operated clamp

meters (the Product) that measure:

• ac and dc current

• ac and dc voltage

• resistance

• continuity

• frequency

The Product ships with:

• test leads

• soft case

• three AAA batteries (installed)

• 317/319 User Manual

How to Contact Fluke

To contact Fluke, call one of these telephone numbers:

• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)

• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)

• Canada: 1-800-36-FLUKE (1-800-363-5853)

• Europe: +31 402-675-200

• Japan: +81-3-6714-3114

• Singapore: +65-738-5655

• Anywhere in the world: +1-425-446-5500

317/319

Users Manual

Or, visit Fluke’s website at www.uke.com.

To register your product, visit http://register.uke.com.

To view, print, or download the latest manual supplement, visit

http://us.uke.com/usen/support/manuals.

Safety Information

XWarning

To prevent possible electrical shock, re, or

personal injury:

• Use the Product only as specied, or the protection

supplied by the Product can be compromised.

• Limit operation to the specied measurement

category, voltage, or amperage ratings.

• Do not touch voltages >30 V ac rms, 42 V ac peak, or

60 V dc.

• Carefully read all instructions.

• Do not exceed the Measurement Category (CAT)

rating of the lowest rated individual component of a

Product, probe, or accessory.

• Do not use the Product around explosive gas, vapor,

or in damp or wet environments.

• Use only correct measurement category (CAT),

voltage, and amperage rated probes, test leads, and

adapters for the measurement.

• Do not work alone.

Clamp Meter

Safety Information

• Do not apply more than the rated voltage, between

the terminals or between each terminal and earth

ground.

• Comply with local and national safety codes.

Use personal protective equipment (approved

rubber gloves, face protection, and ame-resistant

clothes) to prevent shock and arc blast injury where

hazardous live conductors are exposed.

• Replace the batteries when the low battery indicator

shows to prevent incorrect measurements.

• Keep ngers behind the nger guards on the

probes.

• Measure a known voltage rst to make sure that the

Product operates correctly.

• Do not use and disable the Product if it is damaged.

• Connect the common test lead before the live

test lead and remove the live test lead before the

common test lead.

• Read all safety Information before you use the

Product.

• Remove all probes, test leads, and accessories that

are not necessary for the measurement.

• Before each use, examine the Product. Look for

cracks or missing pieces of the clamp housing

or output cable insulation. Also look for loose or

weakened components. Carefully examine the

insulation around the jaws.

317/319

Users Manual

• Do not use test leads if they are damaged. Examine

the test leads for damaged insulation, exposed

metal, or if the wear indicator shows. Check test

lead continuity.

• Disconnect power and discharge all high-voltage

capacitors before you measure resistance,

continuity, capacitance, or a diode junction.

• Do not hold the Product anywhere above the tactile

barrier. See Figure 1.

• Do not use the current sensor if the wear indicator in

the jaw opening is not visible. See Figure 2.

For safe operation and maintenance of the product:

• Remove batteries to prevent battery leakage and

damage to the Product if it is not used for an

extended period.

• Be sure that the battery polarity is correct to prevent

battery leakage.

• Repair the Product before use if the battery leaks.

• Have an approved technician repair the Product.

• Remove the input signals before you clean the

Product.

• Do not operate the Product with covers removed

or the case open. Hazardous voltage exposure is

possible.

Clamp Meter

Symbols

Table 1 shows the symbols used in this manual or on the

Product.

Table 1. Symbols

Symbol Explanation

Risk of danger. Important information. Refer to

manual.

XHazardous voltage. Risk of electric shock.

Application and removal from hazardous live

conductors permitted.

Double insulated

Low battery

Earth ground

Alternating current

Direct current

Do not dispose of this product as unsorted municipal

waste. Go to Fluke’s website for recycling information.

Conforms to relevant European Union directives.

CAT III

Equipment is designed to protect against transients

in equipment in xed equipment installations, such as

distribution panels, feeders and short branch circuits,

and lighing systems in large buildings.

317/319

Users Manual

Specications

General Specications

Digital Display ........................ 6000 count resolution

Low Battery Indication ............ Shows  when the batteries are

below their required voltage

Power Source......................... Three AAA IEC LR03 batteries

Clamp Opening Size............... 37 mm (1.45 in)

Jaw Diameter ......................... 37 mm (1.45 in)

Dimensions (L x W x H) .......... 162.4 x 58.25 x 30.5 mm (6.39 x

2.29 x 1.20 in)

Weight.................................... Approximately 384 g (13.5 oz)

(batteries included)

Display Resolution.................. 6000 Counts

Auto Range ............................ Available in Ohms

Safety..................................... CE, EN/IEC 61010-1 and

IEC 61010-2-032

Measurement Category .......... 600 V CAT III

Andere Handbücher für 317

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fluke Messgerät Handbücher

Fluke

Fluke DTX-1800 Gebrauchs- und Pflegehandbuch

Fluke

Fluke PRUFTECHNIK VIB 6.172 Programmierhandbuch

Fluke

Fluke 333 Technisches Handbuch

Fluke

Fluke SigmaPace 1000 Bedienungsanleitung

Fluke

Fluke 323 PLUS Bedienungsanleitung

Fluke

Fluke endurance series Bedienungsanleitung

Fluke

Fluke Victoreen 451P Bedienungsanleitung

Fluke

Fluke ScopeMeter 190-102 Bedienungsanleitung

Fluke

Fluke 9142 Bedienungsanleitung

Fluke

Fluke 922 Bedienungsanleitung

Fluke

Fluke MDA-550 Bedienungsanleitung

Fluke

Fluke 724 Bedienungsanleitung

Fluke

Fluke 1743 Bedienungsanleitung

Fluke

Fluke 1620A DEWK Bedienungsanleitung

Fluke

Fluke 1623-2 Bedienungsanleitung

Fluke

Fluke 3000 FC Bedienungsanleitung

Fluke

Fluke 1750/ET Bedienungsanleitung

Fluke

Fluke VIBGUARD IIoT Bedienungsanleitung

Fluke

Fluke i1000s Referenzhandbuch

Fluke

Fluke 1742 Konfigurationshandbuch

Fluke

Fluke i800 Bedienungsanleitung

Fluke

Fluke 771 Bedienungsanleitung

Fluke

Fluke ProcessMeter 787 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 45 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung