Fluke 106 Bedienungsanleitung

June 2013, Rev. 1,10/15

All product names are trademarks of their respective companies.

106/107

Digital Multimeters

Users Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for one year from

the date of purchase. This warranty does not cover fuses, disposable batteries, or damage

from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation

or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To

obtain service during the warranty period, contact your nearest Fluke authorized service

center to obtain return authorization information, then send the product to that Service Center

with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS

FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS

NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or

countries do not allow the exclusion or limitation of an implied warranty or of incidental or

consequential damages, this limitation of liability may not apply to you.

11/99

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Table of Contents

Title Page

Introduction...............................................................................................................1

How to Contact Fluke...............................................................................................1

Safety Information ....................................................................................................2

Instrument Overview.................................................................................................8

Terminals..............................................................................................................8

Display..................................................................................................................9

Auto Power Off .........................................................................................................10

Auto Backlight Off.....................................................................................................11

Measurements..........................................................................................................11

Data Hold .............................................................................................................11

Measure AC and DC Voltage...............................................................................12

Measure AC or DC Current..................................................................................14

Measure Resistance.............................................................................................16

Test for Continuity ................................................................................................16

Test Diodes (107 Only) ........................................................................................18

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

106/107

Users Manual

Measure Capacitance...........................................................................................19

Measure Frequency and Duty Cycle (107 Only) ..................................................19

Maintenance.............................................................................................................20

General Maintenance ...........................................................................................21

Test the Fuse........................................................................................................22

Replace Batteries and the Fuse ...........................................................................22

Service and Parts .....................................................................................................24

General Specifications..............................................................................................25

Accuracy Specifications............................................................................................28

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Introduction

The Fluke 106 and 107 Digital Multimeters (the Product) are 6000-count instruments.

The Product is battery powered with a digital display.

Except where noted, the descriptions and instructions in this Users Manual apply to both the

106 and 107.

Unless otherwise identified, all illustrations show the 107.

How to Contact Fluke

To contact Fluke, call one of the following telephone numbers:

•Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)

•Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)

•Canada: 1-800-36-FLUKE (1-800-363-5853)

•Europe: +31-402-675-200

•Japan: +81-3-6714-3114

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

106/107

Users Manual

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user. A Caution

identifies conditions and procedures that could cause damage to the Product or the

equipment under test.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Digital Multimeters

Safety Information

 Warning

To prevent possible electrical shock, fire, or personal injury:

•Carefully read all instructions.

•Read all safety information before you use the Product.

•Use the Product only as specified, or the protection supplied by the Product

can be compromised.

•Do not use the Product around explosive gas, vapor, or in damp or wet

environments.

•Do not use the Product if it is damaged.

•Disable the Product if it is damaged.

•Do not use the Product if it operates incorrectly.

•Examine the case before you use the Product. Look for cracks or missing

plastic. Carefully look at the insulation around the terminals.

•Use only correct measurement category (CAT), voltage, and amperage rated

probes, test leads, and adapters for the measurement.

•Measure a known voltage first to make sure that the Product operates

correctly.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

106/107

Users Manual

•Do not use test leads if they are damaged. Examine the test leads for damaged

insulation and measure a known voltage.

•Do not apply more than the rated voltage, between the terminals or between

each terminal and earth ground.

•Do not use the HOLD function to measure unknown potentials. When HOLD is

turned on, the display does not change when a different potential is measured.

•Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.

•Keep fingers behind the finger guards on the probes.

•Remove all probes, test leads, and accessories before the battery door is

opened.

•Do not exceed the Measurement Category (CAT) rating of the lowest rated

individual component of a Product, probe, or accessory.

•Remove the input signals before you clean the Product.

•Have an approved technician repair the Product.

•Remove the batteries if the Product is not used for an extended period of time,

or if stored in temperatures above 50 °C. If the batteries are not removed,

battery leakage can damage the Product.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Digital Multimeters

Safety Information

•Replace the batteries when the low battery indicator shows to prevent

incorrect measurements.

•Use only specified replacement parts.

•Use only specified replacement fuses.

•Limit operation to the specified measurement category, voltage, or amperage

ratings.

•Do not use test leads if they are damaged. Examine the test leads for damaged

insulation and measure a known voltage.

•Do not use in CAT III or CAT IV environments without the protective cap

installed. The protective cap decreases the exposed probe metal to <4 mm.

This decreases the possibility of arc flash from short circuits.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

106/107

Users Manual

Table 1 is a list of the symbols used on the Product and in this manual.

Table 1. Symbols

Consult user documentation. WARNING. RISK OF DANGER.

Static awareness. Static discharge

can damage part(s). WARNING. HAZARDOUS VOLTAGE.

Risk of electric shock.

AC (Alternating Current) Earth

DC (Direct Current) Capacitance

Both direct and alternating current Diode

Battery Fuse

Conforms to relevant South Korean

EMC Standards Certified by TÜV SÜD Product Service.

Conforms to European Union

directives. Certified by CSA Group to North American

safety standards.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Andere Handbücher für 106

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fluke Multimeter Handbücher

Fluke

Fluke 87 Series IV Bedienungsanleitung

Fluke

Fluke 87V MAX Bedienungsanleitung

Fluke

Fluke 113 Bedienungsanleitung

Fluke

Fluke 110 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 718Ex 30G Bedienungsanleitung

Fluke

Fluke 365 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 101 Bedienungsanleitung

Fluke

Fluke 8845A Bedienungs- und Wartungshandbuch

Fluke

Fluke 279 FC Gebrauchs- und Pflegehandbuch

Fluke

Fluke 8600A Bedienungsanleitung

Fluke

Fluke 3000 FC Bedienungsanleitung

Fluke

Fluke 1508 Bedienungsanleitung

Fluke

Fluke CNX 3000 Bedienungsanleitung

Fluke

Fluke 17B Bedienungsanleitung

Fluke

Fluke 77 Bedienungsanleitung

Fluke

Fluke 8060A Bedienungsanleitung

Fluke

Fluke 112 Bedienungsanleitung

Fluke

Fluke 73 Bedienungsanleitung

Fluke

Fluke 8506A Bedienungsanleitung

Fluke

Fluke 8842A Bedienungsanleitung

Fluke

Fluke 116 Bedienungsanleitung

Fluke

Fluke 27 Bedienungsanleitung

Fluke

Fluke 279 FC Bedienungsanleitung

Fluke

Fluke 115C Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Bedienungsanleitung