Follett Maestro Chewblet 400 Series Einrichtungshandbuch

Follett®Maestro™Chewblet®400 Series

Ice Machine and Top Kit

for Lancer countertop ice and beverage dispensers

208264

NSF

Installation, Operation and Service Manual

00117267R04

801 Church Lane • Easton, PA 18040, USA

Toll free (877) 612-5086 • (610) 252-7301

www.follettice.com

Following installation, please forward this manual

to the appropriate operations person.

Order parts online

www.follettice.com

2 Maestro 400 Series Top Kit for Lancer

Welcome to Follett Corporation

Important cautions

Specications

Installation

Cleaning/descaling and sanitizing

Replacement Parts

Models MTL22SC, MSL22SC

Models MTL30SC, MSL30SC

Table of contents

Maestro 400 Series Top Kit for Lancer 3

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and

outstanding after-the-sale support. To ensure that this equipment delivers that same degree of service, we

ask that you review the installation portion of this manual before beginning to install the unit. Our installation

instructions are designed to help you achieve a trouble-free installation. Should you have any questions or

require technical help at any point, please call our technical service group at (877) 612-5086 or (610) 252-7301.

Note: To expedite assistance, all correspondence or communication MUST include the model number, serial

number and complete and detailed explanation of the problem.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If

damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the ling

of a claim, if necessary.

Check your paperwork to determine which model you have. Follett model numbers are designed to provide

information about the type and capacity of Follett equipment. Following is an explanation of the different model

numbers in the series.

Important cautions

Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area

at all times. If access to this area is required, power to unit must be disconnected rst.

Follett recommends a Follett water lter system be installed in the ice machine inlet water line

(standard capacity #00130299, high capacity #00978957, carbonless high capacity #01050442).

Ice is slippery. Maintain counters and oors around dispenser in a clean and ice-free condition.

Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.

MSL22SC

Ice machine configuration

SC = self-contained

Dispenser size

22 = 22" wide

24 = 24" wide

30 = 30" wide

44 = 44" wide

Dispenser manufacturer

C = Cornelius

L = Lancer

S = SerVend

Ice machine mounting

MT = Maestro top mount

MS = Maestro RIDE

model

4 Maestro 400 Series Top Kit for Lancer

Specications

Electrical

Model number Full load amps Max. fuse size

MC400 series ice machine 115/60/1 11.0 amps 20 amps

Ambient specications

Air temperature 100 F/38 C max. 50 F/10 C min. (best performance below 80 F/27 C)

Water temperature 90 F/32 C max. 40 F/4 C min. (best performance below 70 F/21 C)

Water pressure 70 P.S.I. max. (482kPA) 10 P.S.I min. (89kPA)

Plumbing

Your new ice machine is equipped with a drain line to simplify draining the evaporator and oat reservoir. The

tube labeled “oat/evap drain” is for SERVICE USE ONLY and must NOT be connected to the ice machine drain.

Water line sizes Make up water (inlet to oat) 1/4" min.

Condenser (water-cooled only) 3/8" min.

Drain line sizes Ice machine drain 3/4" min.

Condenser (water-cooled only) 1/2" min.

Slope to drain 1/4" per foot (6mm per 30.4cm run) 1/2" min.

• Water shut-off recommended within 10 feet (3m), drain to be hard-piped and insulated

• Separate drains for ice machine and condenser. To prevent back ow, do NOT connect drains.

• Follett recommends a Follett water lter system be installed in the ice machine inlet water line (standard

capacity #00130299, high capacity #00978957, carbonless high capacity #01050442).

Field Wiring: countertop and wall mount dispensers with RIDE®remote ice

delivery model ice machines

Consult enclosed D400A/W, R400A/W, MCD400A/W manual.

Maestro 400 Series Top Kit for Lancer 5

20.75" (527 mm)

22.75" (578 mm)

13.00"

(331 mm)

4.875"

(124 mm)

2.375"

(61 mm)

1.875" (48 mm)

7.00" (178 mm)

17.00"

(432mm)

20.75" (527 mm)

17.00"

(432 mm)

NSF

Front view — air-cooled

remote mount

Side view — air-cooled

remote mount

Top back view — air-cooled

top mount

Front view — water-cooled Side view — water-cooled

12.875"

(327 mm)

4.75"

(121 mm)

8.375"

(213 mm)

2.25"

(57 mm)

1.875" (48 mm)

6.875"

(175 mm)

(51 mm)

Dimensions and clearances

Required clearances – MCD400 series

Entire front of ice machine clear of obstruction/connections to allow removal.

12" (305 mm) above ice machine for service

6" (153 mm) minimum between louvered (exhaust) side of ice machine and any adjacent equipment.

MCD400AHS – 18" (457 mm) minimum, 10 ft (3 m) maximum between discharge and air intake grilles.

A– 3/4" MPT drain

B– 3/8" OD push-in water inlet

C– Electrical cord

D– 3/8" FPT condenser inlet

E– 1/2" FPT condenser drain

F– Bin signal cord

6 Maestro 400 Series Top Kit for Lancer

Installation

1. Install Lancer ice dispenser according to manufacturer’s specications.

Note: We recommend that the dispenser back be mounted at least 1" (26mm) from wall to allow water, drain

and electric lines from top mount ice machines to be concealed behind dispenser.

2. Disconnect power to dispenser.

3. Remove front panel/merchandiser from the dispenser.

4. Adjust the agitation timer located on Lancer PC board to 1 second on (Fig. 1.1) – 2 1/2 hours off (Fig. 1.2).

PRESS IN ON

THIS SIDE TO

TURN SWITCH

ON.

SWITCH

OFF

PRESS IN ON

THIS SIDE TO

TURN SWITCH

OFF.

ROCKER

SWITCHES

(VIEW LOOKING

DOWN)

SIDE VIEW

1 2 3 4 5 6 7 8

OFF

SWITCH

NUMBER

AGITATION FREQUENCY

NO AGITATION

10 MINUTES

20 MINUTES

30 MINUTES

40 MINUTES

50 MINUTES

60 MINUTES

70 MINUTES

80 MINUTES

90 MINUTES

100 MINUTES

110 MINUTES

120 MINUTES

130 MINUTES

140 MINUTES

150 MINUTES

SWITCH

NUMBER

AGITATION TIME

1 SECOND

2 SECONDS

3SECONDS

4SECONDS

X = ON

O = OFF

Fig. 1

Maestro 400 Series Top Kit for Lancer 7

Agitation adjustments - Lancer FS Series

Major/Minor

FS-16 Setup

Config Bonus Key

Soda/Plain Water

Config Dispense Only

PC Mode

PC Time

Ice Stir Off

Ice Stir On

Sold Out

Carb Sensors

Ice Bin Sensors

Valve Code Version

Number Of Valves

Reset Defaults No Yes

Reload Defaults?

1 2 3 4

12 0.104 0.104

1000

Ice Bin Optic

Upper Lower

Sold Out #1

Selection Sold Out

05000

On Time (MSEC)

Off On

Set PC Mode Menu

V:1 B1 DLY1

Dispense Delay

V:2 1:S 2:W 3:S 4:W

V:1 T:F M:S B:W

Bonus Key Setup

Brands Per Side

V:1 L:2 R:1

FS-16 Setup

Soda/Plain Water

OFF Time (MIN)

00150

On Time (MSEC)

01000

1000 500

34 0.104 0.104

On On On On

V:1 B:1

Sold Out #1

Off

Sold Out #1

Ver. 0.200

Lancer FS-16

Sub-CatagoryMain Menu

Initialization Screen

2nd Sub-Catagory

(Boot Up Only)

Cancel Enter

Scrolls through Main Menu

Press "Enter" to enter sub-catagory

Moves curser to right or left

Changes value (number/letter)

Press "Enter" to enter save changes

Press "Cancel" to exit menu

➊

Lancer FS series only

1. Hold down "cancel" and "left button" to get to hidden menu ➊.

2. Type in code 6655.

3. Type in 150 minutes of off time and 1000 milliseconds (1 second of time) as the preferred setting.

Note: See Lancer manual for more information.

8 Maestro 400 Series Top Kit for Lancer

208264

NSF

Fig. 4

Top mounted ice machine installation

9. Position Follett MCD400AHT ice machine on perimeter

gasket of stainless steel top. Ice machine should be

oriented with A/C condenser facing front (Fig. 4).

8. Install supplied stainless steel top with access opening

toward front of dispenser (Fig. 3).

For dispensers with top mounted ice machines

Proceed with steps 9 through 17.

For dispensers with RIDE model ice machines

Go directly to step 18.

Fig. 3

5. Reinstall front panel.

6. Remove existing plastic top from dispenser and install

supplied gasket around perimeter of dispenser top

(Fig. 2).

7. Sanitize dispenser before proceeding.

gasket

Fig. 2

Maestro 400 Series Top Kit for Lancer 9

Fig. 5

10. Use pliers to compress and remove cage nut at front

of condenser on ice machine base (Fig. 5.1).

11. Install lter and grille. Lock in place using four

mounting screws (Fig. 5.2).

Fig. 6

ModuleNo.

Product

StockModuleIdentification Plate

StockModuleIdentificationPlate

208264

ServiceNo.

MIN.BRANCHCIRCUITAMPACITY

DESIGNPRESSUREHIGHSIDE

MAX.BRANCHCIRCUITFUSESIZE

AIROUT

VOLTS

EastonPennsylvania

MOTORCOMPRESSORTHERMALLY PROTECTED

MOTORCOMPRESSORTHERMALLYPROTECTED

THEUSA

MADEIN

SINGLE

LOWSIDE

CHARGE

PSIG

PHASE

AMPS

PARTNO

AMPS

FULLLOADAMPS

CORPORATION

REFRIGERANT

SERIALNO

MODEL

AIRIN

NSF

filter

grille

Power

Top back view – air-cooled

top mount

3/8" OD

water inlet

Drain

3/4" MPT

12. Make water, drain and electric connections to

ice machine (Fig. 6).

Note: Water connection accepts 3/8" OD

copper or plastic tubing. Push tubing in

until it stops. Use supplied 90˚ push-in

water inlet tting if there is not enough

clearance behind ice machine to install

water tubing without kinking tubing or

putting stress on tting.

Note: Follett recommends the installation

of a Follett water lter system (part#

00130229) on supply water inlet.

10 Maestro 400 Series Top Kit for Lancer

Fig. 7

13. Remove ice machine top panel and louvered side

panel.

14. Insert ice transport tube to a 1/2" (13mm) depth

through mounting bracket (Fig. 7 and 8.1) and

secure transport tube away from condenser fan

under oat reservoir bracket

(Fig. 8.2).

15. Tighten clamp screw on ice machine base securely

(Fig. 8.3).

16. Uncoil capillary tube from bin thermostat and route

through hole in gasket to mounting bracket and

secure as shown (Fig. 7).

17. Reinstall ice machine louvered side panel and top

panel.

GO TO STARTUP – STEP 27.

ice transport tube

bin thermostat

1/2"

Fig. 8

3tighten

clamp

screw

insert ice

transport

tube

Andere Handbücher für Maestro Chewblet 400 Series

Inhaltsverzeichnis

Andere Follett Eiswürfelbereiter Handbücher

Follett

Follett Horizon Elite 1810 Series Bedienungsanleitung

Follett

Follett Horizon Elite Chewblet 1010 Series Bedienungsanleitung

Follett

Follett Horizon Elite HMD710A Bedienungsanleitung

Follett

Follett HCE1400A Bedienungsanleitung

Follett

Follett HCC1000ABS Bedienungsanleitung

Follett

Follett Horizon Elite 2110 Series Bedienungsanleitung

Follett

Follett MC-425A/W Einrichtungshandbuch

Follett

Follett 230V 50Hz Beilage

Follett

Follett Ice Pro DB650 Konfigurationshandbuch

Follett

Follett Horizon Elite 1010 Series Bedienungsanleitung

Follett

Follett Maestro Plus MC 414A Series Einrichtungshandbuch

Follett

Follett HCD1000RBT Bedienungsanleitung

Follett

Follett HCC1400A Bedienungsanleitung

Follett

Follett Horizon Elite series Bedienungsanleitung

Follett

Follett E-ITS100-31 Bedienungsanleitung

Follett

Follett Horizon Elite HCD1010RHT Bedienungsanleitung

Follett

Follett Horizon Elite Chewblet 1010 Series Bedienungsanleitung

Follett

Follett R425A/W Einrichtungshandbuch

Follett

Follett Horizon Elite HC-1810R/N Bedienungsanleitung

Follett

Follett 400 Series Beilage

Follett

Follett R5A Bedienungsanleitung

Follett

Follett HMD700R Bedienungsanleitung

Follett

Follett HCC1010A Bedienungsanleitung

Follett

Follett HCE1000W Bedienungsanleitung

Beliebte Eiswürfelbereiter Handbücher anderer Marken

Hoshizaki

Hoshizaki KMD-460MWJ Bedienungsanleitung

Sub-Zero

Sub-Zero 315I Gebrauchsanweisung

Unold

Unold 48945 Bedienungsanleitung

Kenmore

Kenmore 2217402A Bedienungsanleitung

Cornelius

Cornelius WM600 Betriebsanleitung

GE XPIO43SCSS Bedienungsanleitung

Hoshizaki

Hoshizaki KMD-901MAH Bedienungsanleitung

Whynter

Whynter FIM-450HA Bedienungsanleitung

U-Line

U-Line UMCR014-SC01A Installationshandbuch

Andrew James

Andrew James AJ000522 Bedienungsanleitung

Scotsman

Scotsman CME1356 Bedienungsanleitung

Scotsman

Scotsman ACM 25 Bedienungsanleitung

Kärcher

Kärcher IP 120 Bedienungsanleitung

U-Line

U-Line SS1095 Bedienungsanleitung

Maytag

Maytag MIM1554WRS - Ice Maker Bedienungsanleitung

Hoshizaki

Hoshizaki KM-630MAH Bedienungsanleitung

Princess

Princess Yonanas Bedienungsanleitung

Unold

Unold 48946 Bedienungsanleitung