FONESTAR BAM-35AU Bedienungsanleitung

BAM-35AU, BAM-35BAU

PAIR OF AUTOAMPLIFIED Hi-Fi LOUDSPEAKERS

WITH USB/MP3 PLAYER AND REMOTE CONTROL

INSTRUCTION MANUAL

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 1

- 2-

We take this opportunity to thank you for buying this product.

We recommend you read the instruction manual before switching on the machine and follow the instructions

that are given. Keep the manual for future reference.

SECURITY AND THE ENVIRONMENT

ELECTRICAL SECURITY

Check that the current in the mains connection where the machine is to be installed corresponds to the

power supply of the machine.

To avoid damaging the equipment, electrical shocks, ﬁre or physical injury when you connect or disconnect

the equipment from the power supply, pull the plug ﬁrmly out of the mains socket holding the plug, never the

cable.

Always do this with dry hands.

Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.

Clean dust and dirt off the power supply cable regularly.

Do not open the machine; you could get an electric shock.

CAUTION

While installing the machine, make sure it is switched off and unplugged.

Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.

The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.

Do not place anything inside the machine.

LOCATION

Place the equipment on a horizontal surface with enough space around it to allow ventilation.

Avoid direct sunlight, heat sources and excessive dust.

Do not place the machine near magnetic ﬁelds or static electricity.

Do not use surfaces which vibrate or receive impact.

Do not pile machines on top of one another.

VENTILATION

Never block or cover the ventilation slits on the machine.

Do not expose it to direct sunlight or place it near sources of heat.

PERIODS OF INACTIVITY

When the machine is not going to be used for a long period of time, disconnect it from the mains.

If you are using an adapter, take into account that it will continue using electricity even if the machine is

switched off. If it is not going to be used for a long period of time, disconnect it from the mains.

THE ENVIRONMENT

To save energy, switch the machine off when you are not going to use it for a long time. The machine could

contain substances that are harmful to the environment or human health. To minimize the effect of these

substances the machine must be correctly managed and recycled when you decide to dispose of it.

When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.

If it contains or uses batteries, these must be disposed of separately.

The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the

collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase

similar equipment, so that the dealer can dispose of it correctly (at no added cost).

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 2

- 3-

SIGNIFICANCE OF THE SYMBOLS ON THE MACHINE*

The symbol formed by the expression “Class 1 laser product” written in a rectangle

indicates that visible or invisible laser radiation could be produced. Avoid direct exposure

to the laser.

The symbol formed by a ray of lightening inside a triangle shows that the machine has

connection terminals or a circuit with areas with a current which could cause an electric

shock, even in normal working conditions.

The symbol formed by an exclamation mark in a triangle shows that the instruction manual

must be referred to for information on how the machine works and its use.

The symbol formed by one square inside another square shows that the machine has

double electrical insulation.

The European Community symbol shows that the machine complies with the current

European Union legislation, as well as its transposition to local legislation.

The symbol of a rubbish bin crossed out and over a horizontal line shows that when the

product is disposed of it must be done properly, placing it in a special selective electronic

and electrical equipment container or through a dealer when purchasing a similar product,

at no additional cost. It also shows that the machine was put on the market after 13th

August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic

recycling, and its Spanish equivalent R.D.208/2005).

In accordance with what is set out in the aforementioned decree, FONESTAR is registered

in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI

(Registro de establecimientos Industriales), with the entry number 001851.

*It is possible that some of these symbols do not appear on the machine.

EXEMPTION OF LIABILITY

The characteristics of the equipment and the content of the manual can change without forewarning.

FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the

information supplied in this instruction manual, and speciﬁcally disclaims any implied liability for marketability

or ﬁtness for any other use.

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 3

- 4-

DESCRIPTION

Pair of autoamplified compact Hi-Fi loudspeakers 20 + 20 RMS with USB/MP3 player and remote control.

High quality audio, suitable for PA applications and background music. A remote control is included for

selecting the input, standby, volume control and bass and treble tone control.

CONTROLS AND FUNCTIONS

ACTIVE LOUDSPEAKER

1.- LED power indicator. Lights up in orange if the device is in standby mode and remains lit in red if the

device is in operating mode.

2.- SPEAKER OUTPUT 4 Ω: ampliﬁed output for connecting to the passive loudspeaker, euroblock

terminals.

3.- AUTO STANDBY: standby switch and LED indicator that lights up when the system is in standby mode

AUTO mode: the loudspeaker goes into STANDBY mode when it is connected to the mains supply. It

will switch on automatically when a signal is detected in the input. It will go into standby mode if there

is no signal in the input for 2 minutes. The STANDBY LED will switch off automatically while the

loudspeaker is on and there is a signal connected. The indicator will light up if, after 2 minutes, it does

not detect any signal connected to it.

OFF mode: the loudspeaker switches on when it is connected to the power supply and until the OFF

button is pressed on the remote control, in which case it will go into STANDBY mode. The LED

STANDBY indicator will go off while the loudspeaker is on. The LED STANDBY indicator will light up

when the the loudspeaker is in standby mode after pressing the OFF button on the remote control.

4.- INPUT 2: balanced stereo line input, euroblock connector.

5.- INPUT 1: unbalanced stereo aux line input, 2 x RCA connectors.

6.- +/-: for increasing/decreasing the value of the selected parameter.

7.- BASS, TREBLE: LED indicators that light up red while the BASS and TREBLE options are selected.

This option lets you control the bass and treble tones in playback using the + and - buttons. The

selection is made by pressing the FUNC button repeatedly until the corresponding LED indicator lights

up.

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 4

- 5-

8.- VOL: LED indicator that lights up red while the VOL option is selected. This option lets you raise and

lower the playback volume using the + and - buttons. The selection is made by pressing the FUNC

button repeatedly until the chosen option lights up.

9.- FUNC: press this button repeatedly to choose the parameter to modify in active playback: bass,

treble and volume. The LED indicator of the chosen parameter will light up red.

10.- USB: LED indicator that lights up green while the USB input is selected. The selection is made by

pressing the INPUT button repeatedly until the LED indicator lights up for the chosen option.

11.- INPUT 1: LED indicator that lights up green while the unbalanced INPUT 1 is selected. The selection is

made by pressing the INPUT button repeatedly until the indicator lights up for the chosen option.

12.- INPUT 2: LED indicator that lights up green while the balanced INPUT 2 is selected. The selection is

made by pressing the INPUT button repeatedly until the indicator lights up for the chosen option.

13.- INPUT: press this button repeatedly to select the input that you wish to play. the LED indicator of the

chosen parameter will remain lit in green.

14.- USB: USB storage device connection port.

15.- 7/8: a short press of these buttons changes to the previous/next track. A long press raises/lowers the

volume of the MP3 player.

16.- 1/2: start and pause playback.

17.- Mains supply socket.

18.- ON/OFF: device on/off switch.

REMOTE CONTROL

1.- ON/OFF: buttons to switch the active loudspeaker on/place in standby mode.

2.- MUTE: activates/deactivates the audio output.

3.- INPUT 1, INPUT 2, USB: input selectors. Press the corresponding button to select the required volume.

4.- VOLUME: device volume controls.

5.- TREBLE, BASS: bass and treble tone controls.

6.- 1/2: start and pause playback.

7.- 7/8: a short press of these buttons changes to the next/previous track. A long press raises/lowers the

volume of the MP3 player.

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 5

- 6-

CONNECTION

Before connecting the power supply, make sure that the controls are at their minimum and the POWER

switch is off.

-Connect the passive loudspeaker to the SPEAKER OUTPUT 4 Ω euroblock terminals on the active unit,

using the speaker cable supplied.

-Connect a line level source (CD player, MP3 player, computer, etc.) to the INPUT 1 or INPUT 2 inputs.

- Connect a USB storage device to the corresponding port to play MP3 ﬁles.

-Connect the active loudspeaker to the mains supply using the power supply cable provided.

- Switch on the active loudspeaker using the ON/OFF switch on its rear panel.

- Adjust the volume level and equalize the frequency response using the corrsponding controls on the rear

panel of the active loudspeaker.

- When you are not using the system, switch it off using the ON/OFF switch and disconnect it from the

mains.

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 6

TECHNICAL SPECIFICATIONS

BAM-35AU BAM-35BAU

CHARACTERISTICS Pair of autoampliﬁed loudspeakers.

USB/MP3 player.

Remote control.

Selectable standby function (auto and off).

Pair composed of active loudspeaker with ampliﬁer and passive

loudspeaker.

Shielded magnet loudspeaker.

AMPLIFIER 40 + 40 W maximum

20 + 20 W RMS

LOUDSPEAKERS 1 x 5 ¼" polypropylene woofer with shielded magnet

1 x 1" dome tweeter

RESPONSE 50-20,000 Hz

INPUTS 1 unbalanced stereo aux line, 2 x RCA

1 balanced stereo line, euroblock

OUTPUTS Loudspeaker: euroblock terminals

FUNCTIONS USB/MP3 player

Selectable standby (auto and off)

LED power indicator on the front panel

Selected input indicator, function, USB/MP3 player and stand by

on rear panel

DISPERSION 90º H x 60º V

CONTROLS Input selector: USB, balanced/unbalanced

Volume

Tone: bass and treble ± 14 dB

REMOTE CONTROL Standby

Input selector, USB/MP3 player control

Volume

Tones: bass and treble

Mute

COLOUR Black (RAL 9017) White

PO ER SUPPLY 230 V AC, 50 W

DIMENSIONS 178 x 240 x 180 mm depth

ACCESSORIES Adjustable ﬁxing mounts

- 7-

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 7

ARRANTY

This product has been tested and has passed the corresponding quality control prior to being put on the market.

FONESTAR guarantees the suitability of the product for its speciﬁed use during a period of 2 years from the

delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General

para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007 16 Noviembre.

The lack of conformity in the ﬁrst six months after purchase, due to a manufacturing defect, will be rectiﬁed with

no more than showing the proof of purchase. After six months FONESTAR reserves the right to demand proof of

the product being sold with that problem.

This warranty does not include damage produced by: inappropriate use or negligence, accidents, worn out parts

due to use, breakages, burns, spilt liquids or other substances, excessive humidity, battery deterioration and

internal manipulation of the device, the software or its components by unauthorized persons, and in general any

use that is unrelated to the nature and purpose of the product.

If any service is needed during the warranty period because of lack of conformity, please contact the business or

distributor where the product was purchased in no more than 2 months after being conscious of the problem. It

is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it.

To beneﬁt from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no

corrections or crossing out.

This document adds information, and never decreases the consumers’ rights, which in all cases are protected by

the Spanish law ‘La Ley General para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007

16 Noviembre’.

FONESTAR is a member of ECOEMBALA ES ESPAÑA, S.A. “ECOEMBES”, with number 03497 and all our products carry

the symbol, backed by our membership and subscription to the above mentioned organization with the recycling and

subsequent management of our packaging.

FONESTAR, S.A. - NIF: A28780443 - Poligono Trascueto - 39600 Revilla de Camargo, Cantabria (Spain)

www.fonestar.com

BAM-35AU_BAM-35BAU_MANUAL_(EN)_20170724_Maquetación 1 24/7/17 13:49 Página 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FONESTAR Sprecher Handbücher

FONESTAR

FONESTAR TDO-45 Bedienungsanleitung

FONESTAR

FONESTAR ZSC-1110 Bedienungsanleitung

FONESTAR

FONESTAR TOWER-20TB Bedienungsanleitung

FONESTAR

FONESTAR FORCE-15DSP Bedienungsanleitung

FONESTAR

FONESTAR TOWER-40TB Bedienungsanleitung

FONESTAR

FONESTAR GAT-22F Bedienungsanleitung

FONESTAR

FONESTAR GAT-252 Bedienungsanleitung

FONESTAR

FONESTAR CALIFORNIA Bedienungsanleitung

FONESTAR

FONESTAR EF-335 Bedienungsanleitung

FONESTAR

FONESTAR AQUA-8TG Bedienungsanleitung

FONESTAR

FONESTAR GAT-801-EN Bedienungsanleitung

FONESTAR

FONESTAR BOX-35LED Bedienungsanleitung

FONESTAR

FONESTAR PROBOX-54A Bedienungsanleitung

FONESTAR

FONESTAR AQUA-12TG Bedienungsanleitung

FONESTAR

FONESTAR UT-528 Bedienungsanleitung

FONESTAR

FONESTAR LAND-30TS Bedienungsanleitung

FONESTAR

FONESTAR ELIPSE-5BWIFI Bedienungsanleitung

FONESTAR

FONESTAR PEM-15 Bedienungsanleitung

FONESTAR

FONESTAR KS-07WIFI Bedienungsanleitung

FONESTAR

FONESTAR HANDY Bedienungsanleitung

FONESTAR

FONESTAR CUBE-62 Bedienungsanleitung

FONESTAR

FONESTAR GAT-252 Bedienungsanleitung

FONESTAR

FONESTAR GAT-4509 Bedienungsanleitung

FONESTAR

FONESTAR MF-600SGU Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung