Formax FD 8850CC Bedienungsanleitung

Formax FD 8850CC

Industrial Paper

Shredder

Instruction Manual

FD 8850CC

Industrial Hopper Shredder

OPERATOR MANUAL

12/2011

english

03/2011 Powerline 450.2 9

The shredder is exclusively designed for de-

stroying documents, as well as small quantities

of store cards, credit cards, CDs, USB sticks

and 3,5“discs. Its sturdy drive mechanism is not

damaged by paper clips and staples.

The warranty period for the document shredder

is 1 year. The warranty period is 6 months when

used in multiple shifts.

This warranty and guarantee exclude wear and

damage caused by improper handling or ac-

tions taken by third parties.

1 Proper use, warranty Keep paper shredder out of the

reach of children. Do not let the

shredder run if the person using it

is not present.

Switch the shredder off and dis-

connect it from the mains if it is

damaged, not working correctly or

before relocating or cleaning it.

Service work may only be carried

out by Formax Customer Service or

by the service technicians of our

contractual partners.

• Make sure that the mains plug is well acces-

sible.

• Before you insert the mains plug, make sure

that the voltage and frequency of your power

supply comply with the information on the

name plate.

• Make sure that no liquid gets into the shred-

der.

• The shredder may not be placed near a

heater or other heat source.

• The ventilation slots must not be blocked

or covered and there must be at least 5 cm

space between the shredder and any wall or

furniture.

• Read the operating instructions before

switching on the document shredder. Save

these instructions for later use.

• Observe all safety instructions on to the ma-

chine.

Risk of injury!

Do not reach into the paper feed

slot.

Risk of injury from being pulled

in!

Keep long hair, loose articles of

clothing, ties, scarves, jewellery,

etc. away from feed opening.

Material with the tendency to form

loops, e.g. tapes, strapping mate-

rial, etc. must not be shredded.

Risk of injury from slivers!

Put on protective goggles before

you shred hard credit cards, CDs

or f oppy disks.

In emergencies immediately press

the red emergency-stop push-

button! This switches the paper

shredder off.

2 Safety instructions

Translation of the original operating instructions

english

10 Powerline 450.2 03/2011

Membrane keyboard

Reversing pushbutton

Cutting system runs in reverse

direction.

Stop pushbutton

Cutting system stops.

Shredder remains in standby

function.

ON pushbutton

Shredder is switched on.

Cutting system runs in feed

direction.

Door or ﬂap opened

red LED

Paper jam – electric motor

overloaded

red LED

Cut material bag full

red LED

Ready for operation

green LED

3 Machine components

Main switch

Turning the main switch 90° in

clockwise direction switches the

machine on.

The main switch can be secured

in the OFF postion with a padlock

Emergency-stop pushbutton

In emergencies immediately press

the red emergency-stop push-

button! This switches the paper

shredder off. The emergency stop

button is unlocked by turning it to

the left.

1 Safety instructions

2 Mains switch

3 Emergency-stop pushbutton

4 Membrane keyboard

5 Paper feed slot

6 Folding tray

7 Front door

8 Name plate

9 Flap

10 Filling drum

11 Drum handle

HSM GmbH + Co. KG

Austrasse 1-9

88699 Frickingen / Germany

HSM GmbH + Co. KG

Austrasse 1-9

88699 Frickingen / Germany

2 x 15 mm

3,9 x 50 mm

english

03/2011 Powerline 450.2 11

Switching the paper shredder on

• Unlock the emergency stop button by

turning it anti-clockwise.

• Turn main switch to position I.

 Green LED lights.

 Paper shredder is ready for opera-

tion (standby)

Notice Safety switches are installed at the

doors. Paper shredder can only be

switched on if the door and the ﬂap are

both closed.

Shreds smooth paper and continuous

paper

Notice The tray can be folded out to hold

stacks of paper or continuous lists.

• Feed paper. See „Tech-

nical data“ for sheet

capacity.

 The shredding pro-

cess is star ted by a

pho to –cell in the paper

feeding opening.

 When the paper fee-

d opening is free again,

the cut ting sy stem au to ma tical ly swit ches off

af ter app rox. 3 sec. and returns to standby.

Notice

The document shredder can also be

started by pressing the green arrow

button:

• Press brieﬂy:

Cutting device starts.

Automatic stop approx. 3 seconds af-

ter the last piece of paper was drawn

in, or manual stop when the stop but-

ton is pressed.

• Hold down for longer than 2 sec-

onds:

constant operation without light bar-

rier function.

The cutting device runs until it is

switched off with the stop button.

4 Operation

Only machines with cut size 3.9 x 50 mm:

Shredding crumpled paper

• Pull the drum handle

forward and put the

crumpled paper in the

drum.

• Press the green arrow key

When you push back the handle the

paper falls into the shredder blades.

Switching paper shredder off

• Turn main switch to position 0

Secure main switch with a padlock, if

necessary.

Destroying USB sticks

Insert USB sticks in the centre of the paper

feed.

english

12 Powerline 450.2 03/2011

Paper jam

You have fed in too much paper.

 Paper shredder jammed.

 Red LED in the key pad f ashes.

 Paper shredder reverses automati-

cally.

Notice! Do not press dashed arrow button and

green arrow button alternately for-

wards and backwards.

Cutting unit can be damaged.

CAUTION!

Injuries by cutting rollers are possible

even when the paper shredder is idle.

Keep hands away from the cutting

system!

• Open the f ap and clear the paper

jam.

If material is not completely pushed

out, then

• Close the f ap again.

• Press dashed arrow button.

 Paper is pushed out.

• Pull paper out.

• Separate paper stack and feed paper

again.

• The shredding process is started

again with the green arrow button or

by the light barrier (paper feed).

Electric motor overheated

 Red LED on membrane keyboard

lights.

 Paper shredder switches off auto-

matically.

• Allow paper shredder to cool down

for approx. 15 to 20 min.

Front door or ﬂap opened

 Red LED on membrane keyboard

lights.

 Paper shredder stops automatically.

•

Close door and f ap.

Note If the door is opened when the cut-

ting device is running, the document

shredder must be started again using

the green button after the door of the

document shredder has been closed.

Bag for shredded material full

 Red LED on membrane keyboard

lights.

 Paper shredder stops automatically.

Note Reversing the cutting device (“Re-

verse” button) is also possible even

when the shredded material container

is full.

• Insert new bag.

Notice! Empty the shredded material con-

tainer after the paper shredder has

been switched off, because otherwise

malfunctions of the cutting system

could occur when the rocker switch is

pressed several times in succession.

5 Troubleshooting

english

03/2011 Powerline 450.2 13

Switch off the shredder and pull out the mains

plug. When cleaning only use a soft cloth and

a mild soap-water solution. However, no water

must enter the equipment.

Oil the cutting unit when

cutting performance de-

creases or the device be-

comes noisy, or every time

you empty the waste con-

tainer:

6 Cleaning and maintenance • Spray special cutting block oil

through paper feed opening across

the whole width of the cutting system

blades.

• Run cutting system forwards and

backwards several times without

feeding paper.

 Paper dust and particles are shaken

off.

7 Technical data

EU-Version

US-Version

Cutting type Cross cut

Shred size (mm) 3.9 x 50

Nominal cutting capacity, DIN A4 70 g/m260 sheets

Cutting speed 218 mm/s

Loading width 443 mm

Power supply 3W + PE 208 V, 60 Hz

Rated power 2.99 HP

Nominal current 20 A

Plug L15-30P 30 A

Ambient air temperature 25 °C

Dimensions W x D x H (mm) 750 x 665 x 1590

Weight 220 kg

Volume of shredded material bag 290 l

Noise level (Idle running/ load) 58 dB(A) / 70-75 dB(A)

Cutting type Cross cut

Shred size (mm) 3.9 x 50 2 x 15

Safety rating DIN 32757 – 1 3 4

Cutting capacity (sheets), DIN A4 70 g/m2

80 g/m2

80 - 85

65 - 70

35 - 40

28 - 32

Cutting speed 218 mm/s

Loading width 443 mm

Weight 220 kg

Volume of shredded material bag 290 l

Noise level (Idle running/ load) 58 dB(A) / 70-75 dB(A)

Dimensions W x D x H (mm) 750 x 665 x 1590 750 x 665 x 1460

Power for the maximum number of sheets 3 kW 2.2 kW

Power supply

Power supply fuses (slow-blow)

3 x 400 V, 50 Hz

3 x 16 A

3 x 400 V, 50 Hz

3 x 10 A

Inhaltsverzeichnis

Andere Formax Aktenvernichter Handbücher

Formax

Formax FD 87 Montageanleitung

Formax

Formax FD 8202CC Cross-Cut Bedienungsanleitung

Formax

Formax FD 8204CC Bedienungsanleitung

Formax

Formax FD 8202CC Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

Formax

Formax FD 8500CC Bedienungsanleitung

Formax

Formax FD 8500CC Bedienungsanleitung

Formax

Formax FD 8402CC Bedienungsanleitung

Formax

Formax FD 8254CC Bedienungsanleitung

Formax

Formax FD 8302SC Bedienungsanleitung

Formax

Formax FD 8300HS Bedienungsanleitung

Formax

Formax Formax FD 572 Bedienungsanleitung

Formax

Formax FD 8652CC Bedienungsanleitung

Formax

Formax COMBI 0030 Bedienungsanleitung

Formax

Formax FD 8400HS Bedienungsanleitung

Formax

Formax FD 8732HS Bedienungsanleitung

Formax

Formax FD 8702CC Bedienungsanleitung

Formax

Formax FD 8500AF Bedienungsanleitung

Formax

Formax FD 8712HS Bedienungsanleitung

Formax

Formax FD 8206 Bedienungsanleitung

Formax

Formax FD 8732HS Bedienungsanleitung

Formax

Formax FD 8502AF Bedienungsanleitung

Formax

Formax Cut-True 29A Bedienungsanleitung

Formax

Formax FD 8906CC Cross-Cut Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung

Fellowes

Fellowes Powershred M-3C Bedienungsanleitung