Forney 430 Bedienungsanleitung

Connect to input power

* TIG Torch sold separately

4. 6.

Choose between High Frequency (HF) start

or Lift Start

Adjust amperage per

material thickness

Connect TIG torch lead

to gas (100% Argon)

Connect TIG torch and

ground clamp

ELECTRODE IS ALWAYS ELECTRICALLY

HOT WHILE IN TIG MODE

FIND MORE INFORMATION AT

FORNEYIND.COM

TIG TROUBLESHOOTING TIPS

TIG QUICK START GUIDE

220 ST PRO WELDER (NOT RECOMMENDED FOR ALUMINUM)

ITEM# 430

Read user manual

Select process

TIG Torch Ground

Clamp

Welder should be the only thing plugged into the circuit.

Frequently tripping circuit breaker or exceeding

duty cycle

To ensure maximum quality, always clean

and prepare welding surfaces.

Workpiece Preperation

Connect ground clamp to clean, bare metal. No rust,

paint or other coatings. Attach the ground clamp

directly to the workpiece if you are experiencing issues.

Workpiece grounding

Low weld output or poor fusion

• Usually due to low input power.

• Welder should be only thing plugged into circuit.

• Avoid using extension cords. If one must be used, it must be 3 conductor #8 AWG.

• Generators must be a minimum 10,000W continuous output with no low-idle

function (or low-idle off), 5% THD Max.

208-240V

• Usually due to low input power.

• Welder should be only thing plugged into circuit.

• Avoid using extension cords. If one must be used, it must be 3 conductor #12 AWG

or larger up to 25 feet

• Generators must be a minimum 5,000W continuous output with no low-idle function

(or low-idle off), 5% THD Max.

Low weld output or poor fusion

110-120V

QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected]

forneyind.com

• Not recommended for this machine.

Aluminum welding

• Generator OK with continuous output >

5,000 W (120V) or 10,000 W (230V).

• Extension cord: #12 AWG (120V) or #8

AWG (230V) or larger. 25’ (8m) or shorter

extension cords recommended

STICK TROUBLESHOOTING TIPS

*Performance may vary by brand

Connect to input power Recommended electrodes

4. 6.

Adjust amperage per

settings chart on the

welder

Connect electrode

holder and ground

clamp according to

desired polarity

Usually

DCEP -

Electrode

Positive

STICK QUICK START GUIDE

220 ST PRO WELDER

ITEM# 430

Read user manual

Select process

Electrode Holder Ground

Clamp

Electrode Electrode Amperage

3/32” 1/8” 5/32”

E6010

E6011

E6013

E7014

E7018

E308L

Ni55

30-75 75-125 110-165

40-85

40-90

70-90

65-100

40-70

50-65

75-125

70-110

90-140

110-165

75-115

80-95

110-165

115-140

140-190

150-220

105-160

110-135

Use 3/16” diameter electrodes or smaller. Some 3/16” will draw too

much amperage.

Trying to weld single pass on material larger than 3/8” thick is not

possible with this machine. Multi-pass recommended for thicker

materials.

Welder should be the only thing plugged into the circuit.

Frequently tripping circuit breaker or exceeding

duty cycle

QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected]

forneyind.com

To ensure maximum quality, always clean

and prepare welding surfaces.

Workpiece Preperation

Connect ground clamp to clean, bare metal. No rust,

paint or other coatings. Attach the ground clamp

directly to the workpiece if you are experiencing issues.

Workpiece grounding

• Usually due to low input power.

• Welder should be only thing plugged into circuit.

• Avoid using extension cords. If one must be used, it must be 3 conductor #12 AWG

or larger up to 25 feet

• Generators must be a minimum 5,000W continuous output with no low-idle function

(or low-idle off), 5% THD Max.

Low weld output or poor fusion

110-120V

Low weld output or poor fusion

• Usually due to low input power.

• Welder should be only thing plugged into circuit.

• Avoid using extension cords. If one must be used, it must be 3 conductor #8 AWG.

• Generators must be a minimum 10,000W continuous output with no low-idle

function (or low-idle off), 5% THD Max.

208-240V

• Generator OK with continuous output >

5,000 W (120V) or 10,000 W (230V).

• Extension cord: #12 AWG (120V) or #8

AWG (230V) or larger. 25’ (8m) or shorter

extension cords recommended

FIND MORE INFORMATION AT

FORNEYIND.COM

Andere Forney Schweißsystem Handbücher

Forney

Forney 298 Bedienungsanleitung

Forney

Forney 140 MIG WELDER Bedienungsanleitung

Forney

Forney 45 P PRO Bedienungsanleitung

Forney

Forney 140 MP Bedienungsanleitung

Forney

Forney 125 FC Bedienungsanleitung

Forney

Forney 190 MP Bedienungsanleitung

Forney

Forney 95FI-A Bedienungsanleitung

Forney

Forney EASY WELD 100 ST Bedienungsanleitung

Forney

Forney 180 ST+ Bedienungsanleitung

Forney

Forney TIG Bedienungsanleitung

Forney

Forney MIG 180FI Bedienungsanleitung

Forney

Forney 220 MP Bedienungsanleitung

Forney

Forney 250P+ Bedienungsanleitung

Forney

Forney 700P Bedienungsanleitung

Forney

Forney 325P Bedienungsanleitung

Forney

Forney FLEX 30 PLASMA ST Bedienungsanleitung

Forney

Forney 220 ST Bedienungsanleitung

Forney

Forney 96FI-A Bedienungsanleitung

Forney

Forney 190 MP Bedienungsanleitung

Forney

Forney 140 MP Bedienungsanleitung

Forney

Forney 220 ST Bedienungsanleitung

Forney

Forney 140 MP Bedienungsanleitung

Forney

Forney Easy Weld 180 ST Bedienungsanleitung

Forney

Forney Easy Weld 20P Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung