Forney Easy Weld Bedienungsanleitung

WELD EXAMPLES & TROUBLESHOOTING

WELDING TIPS

• Smooth bead

• Minimal spatter

• Good fusion

• Stringy and lack of fusion

• Lack of fusion

• Excessive spatter

GOOD WELD

WELD SPEED TOO FAST

CURRENT TOO LOW

STICK OUT TOO LONG

• Melt through or burn through

• Too wide

• Bead too flat

• Visible melt through

CURRENT/WFS TOO HIGH

WELD SPEED TOO SLOW

• Stickout

3/8

”

+/-

1/8

”

• Short stickout = more

current and more

penetration

• Affects the arc shape

• Less voltage = tighter

arc and potentially

more spatter

OPTIMAL STICKOUT

THIN MATERIAL

THICK MATERIAL

Less voltage

More voltage

Lower wire feed speed

Higher wire feed speed

Faster travel speed

Slower travel speed

VOLTAGE

• Higher wire feed speed

equals more amperage

• Can also affect arc

shape and penetration

WIRE FEED SPEED

(WFS)

• Affects bead width

and height

• Can also affect

penetration

TRAVEL SPEED

3/8”

WARNING: To prevent fire and serious injury: Keep torch and wire clear of grounded objects while

welder is plugged in. Be sure to follow safe welding procedures and wear proper PPE (clothes, welding

helmet, safety glasses, welding gloves, boots, etc.).

Assemble torch wrap tabs to top handle.

(Tool needed: screwdriver)

Plug in welder.

Turn it on, and squeeze trigger until wire

comes out.

Carefully tighten wire feed tension knob and

despooler knob.

Adjust wire feed speed and material thickness

switch per setup chart.

Install wire spool per the diagram inside the

cabinet.

Turn machine on, pull trigger on MIG gun and weld. Adjust stickout, travel speed, wire feed

speed and voltage as necessary to achieve a good weld. See reverse side for weld examples

and welding tips.

WARNING: To prevent serious injury, read manual warnings and instructions before use.

125 FC WELDER QUICK START GUIDE

Inhaltsverzeichnis

Andere Forney Schweißsystem Handbücher

Forney

Forney Easy Weld 140FC-i Bedienungsanleitung

Forney

Forney 235 Bedienungsanleitung

Forney

Forney 430 Bedienungsanleitung

Forney

Forney 140 MIG WELDER Bedienungsanleitung

Forney

Forney 190 MP Bedienungsanleitung

Forney

Forney 96FI-A Bedienungsanleitung

Forney

Forney 317 Bedienungsanleitung

Forney

Forney 180 ST+ Bedienungsanleitung

Forney

Forney 700P Bedienungsanleitung

Forney

Forney 270 Bedienungsanleitung

Forney

Forney 317 Bedienungsanleitung

Forney

Forney 140 MIG WELDER Bedienungsanleitung

Forney

Forney 325P Bedienungsanleitung

Forney

Forney 140 MP Bedienungsanleitung

Forney

Forney 95FI-A Bedienungsanleitung

Forney

Forney 220 ST Bedienungsanleitung

Forney

Forney FLEX 30 PLASMA ST Bedienungsanleitung

Forney

Forney 190 Bedienungsanleitung

Forney

Forney 298 Bedienungsanleitung

Forney

Forney 410 Bedienungsanleitung

Forney

Forney 220 ST Bedienungsanleitung

Forney

Forney Easy Weld 20P Bedienungsanleitung

Forney

Forney 95FI Bedienungsanleitung

Forney

Forney Easy Weld 180 ST Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung