Forney Easy Weld 180 ST Bedienungsanleitung

• Generator OK with continuous output

> 4,500 W (120V) or 10,000 W

(230V)

• Extension cord: #12 AWG (120V) or

#8 AWG (230V) or larger. 25’ (8m)

or shorter extension cords

recommended.

120VAC,

20A outlet,

30A breaker

recommended

Connect to Input Power

* TIG Torch sold separately

4. 6.

Initiate the arc with a scratch or lift

technique when in contact with the metal

Adjust amperage per

material thickness

Connect TIG torch lead

to gas (100% Argon)

Connect TIG torch and

ground clamp

ELECTRODE IS ALWAYS ELECTRICALLY

HOT WHILE IN TIG MODE

FIND TIG WELDING TIPS AT

WWW.ASKFORNEY.COM

TIG TROUBLESHOOTING TIPS

QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038

[email protected] • askforney.com • forneyind.com

Verify machine is plugged in and on.

See manual.

Both LED lights off

Duty cycle exceeded or

insufficient air flow. Allow

machine to cool. Ensure vents are

clear of obstacles. See manual.

Both LED lights on

• Usually due to low input power.

• Welder should be only thing plugged into circuit.

• Avoid using extension cords. If one must be used, it must be #10 AWG

or larger; 25’ (8m) or shorter.

• Generators must be 4,500 W continuous output and not have a

low-idle function (or have it disabled).

Low weld output or poor fusion

Welder should be the only thing plugged into the circuit.

Frequently tripping circuit breaker or exceeding

duty cycle

Connect ground clamp to clean, bare metal. No

rust, paint or other coatings. Attach the ground

clamp directly to the workpiece if you are

experiencing issues.

Workpiece grounding

• Not recommended for this machine.

• Output is DC only which is not recommended for TIG

welding aluminum.

Aluminum welding

TIG QUICK START GUIDE

180 ST WELDER (NOT RECOMMENDED FOR ALUMINUM)

ITEM# 291

Read user manual

Select process

ONLY

EN_v1

TIG Torch Ground

Clamp

STICK TROUBLESHOOTING TIPS

QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038

[email protected] • askforney.com • forneyind.com

• Generator OK with continuous output

> 4,500 W (120V) or 10,000 W

(230V)

• Extension cord: #12 AWG (120V) or

#8 AWG (230V) or larger. 25’ (8m)

or shorter extension cords

recommended.

120VAC,

20A outlet,

30A breaker

recommended

*Performance may vary by brand

Connect to Input Power Recommended electrodes

4. 6.

FIND STICK WELDING TIPS AT WWW.ASKFORNEY.COM

Adjust amperage per

settings chart on the

welder

Connect electrode

holder and ground

clamp according to

desired polarity

Usually

DCEP -

Electrode

Positive

Verify machine is plugged in and on.

See manual.

Both LED lights off

Duty cycle exceeded or

insufficient air flow. Allow

machine to cool. Ensure vents are

clear of obstacles. See manual.

Both LED lights on

• Usually due to low input power.

• Welder should be only thing plugged into circuit.

• Avoid using extension cords. If one must be used, it must be #10 AWG

or larger; 25’ (8m) or shorter.

• Generators must be 4,500 W continuous output and not have a

low-idle function (or have it disabled).

Low weld output or poor fusion

Use 5/32” diameter electrodes or smaller. Some 5/32” may draw too

much amperage.

Trying to weld single pass on material larger than ¼” thick is not

possible with this machine. Multi-pass recommended for thicker

materials.

Welder should be the only thing plugged into the circuit.

Frequently tripping circuit breaker or exceeding

duty cycle

Connect ground clamp to clean, bare metal. No

rust, paint or other coatings. Attach the ground

clamp directly to the workpiece if you are

experiencing issues.

Workpiece grounding

• Not recommended for this machine.

• Requires more amperage on Stick than this machine is designed to output.

STICK QUICK START GUIDE

180 ST WELDER (NOT RECOMMENDED FOR ALUMINUM)

ITEM# 291

Read user manual

Select process

Aluminum welding

EN_v1

Electrode Holder

Ground

Clamp

Electrode Diameter

Inches MM AMPS

E6010

E6011

E6013

E7014

E7018

Amperage

3/32

1/8

5/32

1/16

3/32

1/8

5/32

3/32

1/8

5/32

3/32

1/8

5/32

2,4

3,2

4,0

1,6

2,4

3,2

4,0

2,4

3,2

4,0

2,4

3,2

4,0

30-75

35-120

80-160

20-50

40-90

50-130

90-180

40-90

60-130

90-180

50-100

80-160

90-180

Andere Handbücher für Easy Weld 180 ST

Dieses Handbuch passt für folgende Modelle

Andere Forney Schweißsystem Handbücher

Forney

Forney 140 MP Bedienungsanleitung

Forney

Forney 298 Bedienungsanleitung

Forney

Forney 190 MP Bedienungsanleitung

Forney

Forney 95FI Bedienungsanleitung

Forney

Forney 410 Bedienungsanleitung

Forney

Forney 317 Bedienungsanleitung

Forney

Forney 235 Bedienungsanleitung

Forney

Forney FLEX 30 PLASMA ST Bedienungsanleitung

Forney

Forney FLEX 30 PLASMA ST Bedienungsanleitung

Forney

Forney Easy Weld 20P Bedienungsanleitung

Forney

Forney SPOOL PRO HORNET SG 250 Bedienungsanleitung

Forney

Forney TIG Bedienungsanleitung

Forney

Forney Easy Weld series Bedienungsanleitung

Forney

Forney Easy Weld 180 ST Bedienungsanleitung

Forney

Forney 420 Bedienungsanleitung

Forney

Forney Easy Weld 20P Bedienungsanleitung

Forney

Forney 250P+ Bedienungsanleitung

Forney

Forney 317 Bedienungsanleitung

Forney

Forney MIG 180FI Bedienungsanleitung

Forney

Forney 96FI-A Bedienungsanleitung

Forney

Forney Easy Weld 140FC-i Bedienungsanleitung

Forney

Forney 190 MP Bedienungsanleitung

Forney

Forney 140 MIG WELDER Bedienungsanleitung

Forney

Forney 700P Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung

Everlast

Everlast POWER MTS 221STi Bedienungsanleitung