Foscam Huntvision Bedienungsanleitung

For more detailed instrucons, please visit

foscam.com/downloads.

For more speciﬁc assistance, please feel free

to drop us an E-mail at: [email protected]

User Manual

Contents

1. Descripon

1.1 Package Contents

1.2 Physical Descripon

1.2.1 Front Panel

1.2.2 Rear Panel

1.2.3 Indicator Light Status

1.3 Key Features

2. Inial Installaons

2.1 Setup by Foscam App

2.2 Setup by a Web Browser

2.2.1 Hardware Installaon

2.2.2 Connect to Camera

3. Access to Your Camera

3.1 Access from a Web Browser

3.1.1 Access from Local Area Network

3.1.2 Basic Sengs for Remote Access

● Port Forwarding Seng

● Stac IP Address Seng

P12

P15

P17

P18

P19

P20

P22

P23

P26

P28

3.1.3 Remote Access Methods

● WAN IP Access Seng

● DDNS Access Seng

3.2 Access from Foscam App

3.2.1 Local Area Network Access

3.2.2 Remote Access

3.3 Other Access Method

4. Features and Sengs

4.1 WiFi Conﬁguraon

4.2 Storage

4.2.1 SD Card

4.2.2 FTP

4.2.3 Foscam Cloud

4.2.4 Foscam NVR Products

4.2.5 Device Local Storage

4.3 Mail Sengs

4.4 Detecon Setup

4.4.1 Moon Detecon

4.4.2 Sound Detecon

4.5 Other Sengs

4.5.1 Sengs in Foscam App

4.5.2 Sengs in a Web Browser

5. FAQ

P10

1. Descripon

1.1 Package Contents

1.2.1 Front Panel

1.2 Physical Descripon

WPS/Reset

Micro SD

Card Slot

Microphone

Infrared LED

Lens

Quick Start Guide

User Manual

Power Adapter

Mounng Bracket

IP Camera

WiFi Antenna Ethernet Cable Expansion Screws

Please verify all contents received are complete according to the Package Contents listed below.

● Lens: Fixed focus lens

● Infrared LED: Infrared LEDs for night vision

● Microphone: Built-in microphone

● Micro SD Card slot: Supports up to 128GB SD card for storing the video

● WPS/Reset

WPS: Push both WPS/Reset buon on the camera and wireless router

about 3 seconds, the camera will connect to the wireless router

automacally, in WPS process, the Network light will ﬂash every 0.4

seconds;

Reset: Push and hold the WPS/Reset buon unl a voice prompt,

‘Reset Succeeded’, to set the camera to factory default, the Power light

will ﬂash every 0.4 seconds.

LAN

Power

Network light

Power light

Antenna

Loud Speaker

● LAN: 10/100 Mbps RJ-45 port for wired connecon

● Power: DC 5V/2A power supply

● Speaker: Built-in speaker

● Antenna: Used to connect external wireless antenna

Power Light

Light

Network Light

OFF

Flashing Status Descripon

The power doesn’t work properly

The power supply works ﬁne

Flashing every 0.4 seconds Reset takes eﬀects

OFF No network connecon

ON Wired connecon

Slow Flash every 1.0 Second WiFi connected

Flashing every 0.4 seconds WPS is connecng

Flashing every 0.2 seconds EZ-Link takes eﬀect

1.2.2 Rear Panel

The ﬂashing status of the power light and Network light are shown in the following table.

1.2.3 Indicator Light Status

1.3 Key Features

●App Management

●Standard H.264

●P2P Easy Access

●2MP (P2) / 4MP (P4)

●WEP, WPA-PSK and

WPA2-PSK Encrypon

●Wireless Connecon

(IEEE 802.11b/g/n WI-FI,

up to 150Mbps)

●IR Range up to 8m (26)

●IR-Cut Auto Switch

●Embedded Free Foscam DDNS

Service

●Third-Party Domain Name Service

●Two-way Audio

●ONVIF Protocols

●Mul-level User Management

with Password Protecon

●Moon/Sound Detecon

●Image Snapshot

●Dual-stream

●Micro SD Card Storage

up to 128GB

●Voice Prompt

●FTP Storage

●Record Schedule

●Wide Dynamic Range

●Magic Zoom (P4)

●Pan & Tilt Control (horizontal

350°, vercal 100°)

2. Inial Installaon

You will need to set up the camera to make sure all the features work normally. Huntvision product provides

several methods for the inial installaon. Please choose the most convenient method for you.

You can download Foscam App for your smartphone from APP Store or Google Play Store so that you can

easily set up and manage your Huntvision products. For detailed instrucon, please check the Quick Start

Guide.

You can also use a web browser to set up your camera on your computer. Huntvision products support

IE/Firefox/Google/Safari browser. Please read the following instrucons carefully for a successful inial setup.

NOTE: We recommand the IE web browser for full features and sengs.

2.1 Setup by Foscam App

2.2 Setup by a Web Browser

2.2.1 Hardware Installaon

Mount the antenna and make it stand vercally.

Connect the camera to the LAN network (Router

or Switch) via an Ethernet cable.

Connect the power adapter to the camera, and

wait for a few moments unl camera boots with

an automaca rotaon and a voice promot,

‘Wired connecon succeed’.

2.2.2 Connect to camera

Equipment Search Tool

Camera Name

P2 Hp://192.168.**.**:88 ************ IPC

IP Address Device ID Type

Visit Foscam oﬃcial website ‘foscam.com/tools’, then

you can ﬁnd the ‘Equipment Search Tool’; Download

it to your computer.

Open the Equipment Search Tool, and you will ﬁnd

your camera in the device list if your camera and your

computer are connected to the same network.

Double click your camera, and your web browser

will be opened to the camera login page.

NOTE: If your computer runs the Windows OS, please

set the IE web browser as your default browser, or you

can copy the web address to this login page and open

it on your IE web browser.

Donwload and install the plugins for your browser

(IPWebComponents.exe).

NOTE: During the plugins installaon, your browser will

be required to close, and aer installaon completed,

you will need to double click the camera in the search

tool list again.

Now you can log in your camera, the default

username is admin, and there is no password;

aer entering the default username, click Login.

NOTE: Aer you login the camera, you will be required

to change the username and the password for your

camera; Aer midifying, you can log into your camera

with this new username and password.

Aer login, there will be a Setup Wizard, which

will guide you to complete the camera setup.

NOTE: If you don’t want to do these sengs at this

moment, you can just click ‘ Next ’ to skip, and you can

update all of this sengs later in the camera system.

● Now you have logged in the camera system!

3.1 Access to Camera via a Web Browser

3. Access to Camera

Aer you ﬁnished the inial installaon for your camera, you can login your camera for your daily use and

sengs.

*If you want to access to your camera via a local area network (LAN), please make sure your App or computer and your

camera are connected to the same network;

*If you want to access to your camera remotely, please make sure your camera has been connected to the Internet;

*If you don’t want to connect your camera with an Ethernet cable, please make sure that you have completed the WiFi

conﬁguraon for your camera.

It is easy for you to access to camera by using a web browser; Before accessing to your camera, please check if

your camera is connected to a local area network or the Internet.

3.1.1 Access to Camera in a Local Area Network

Equipment Search Tool

Camera Name

P2 Hp://192.168.**.**:88 ************ IPC

IP Address Device ID Type

Double click your camera in the device list and your

default web browser will be opened automacaly to

the camera login page.

3.1.2 Basic Sengs for Remote Access

Log into your router to check the LAN IP your router assign to your camera.

By using the Equipment Search Tool, you can have a quick and easy access to your camera.

Please check Page 4 in this User Manual for the method of

downloading the Equipment Search Tool.

You can also just type in the IP Address in your web browser to open the camera login page, our camera

supports HTTP and HTTPS protocol.

●hp://LAN IP:HTTP Port No. ( The default HTTP Port No. is 88 ); For example: hp://192.168.**.**:88

●hps://LAN IP:HTTPS Port No. ( The default HTTP Port No. is 443 ); For example: hps://192.168.**.**:443

Before having the remote access to our camera, you need to complete the Port Forwarding and Stac IP

Address Sengs for both these two remote access methods.

● Port Forwarding Sengs

* This seng is on your router system, not in the camera. Here we will use a regular WiFi Router as an

example, and the router sengs descripon will be slightly diﬀerent on diﬀerent routers.

Inhaltsverzeichnis

Andere Foscam IP-Kamera Handbücher

Foscam

Foscam FI9802W Bedienungsanleitung

Foscam

Foscam FI8907W Bedienungsanleitung

Foscam

Foscam FI9828P Bedienungsanleitung

Foscam

Foscam FI9820W Bedienungsanleitung

Foscam

Foscam FI9851P Bedienungsanleitung

Foscam

Foscam FI8919W Bedienungsanleitung

Foscam

Foscam C1 Lite Bedienungsanleitung

Foscam

Foscam FI9818W Bedienungsanleitung

Foscam

Foscam FI9821EP Bedienungsanleitung

Foscam

Foscam FI9900EP Bedienungsanleitung

Foscam

Foscam FI9802W Bedienungsanleitung

Foscam

Foscam FI9801W Bedienungsanleitung

Foscam

Foscam FI9818W Bedienungsanleitung

Foscam

Foscam FI8903W Bedienungsanleitung

Foscam

Foscam FI9818W Bedienungsanleitung

Foscam

Foscam FI8910W Bedienungsanleitung

Foscam

Foscam FI8904W Bedienungsanleitung

Foscam

Foscam FI8905W Bedienungsanleitung

Foscam

Foscam FI8602 Bedienungsanleitung

Foscam

Foscam C2 Bedienungsanleitung

Foscam

Foscam FI8903W Bedienungsanleitung

Foscam

Foscam FI9826P Bedienungsanleitung

Foscam

Foscam FI9804W Bedienungsanleitung

Foscam

Foscam FI9901EP Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung