Foscam FI8910W Bedienungsanleitung
Quick Installation Guide
（
（（
（For Windows & Mac OS）
））
）
Indoor Wireless IP Camera
Model:FI8910W Model:FI8918W
Colour
：
Black/White Colour
：
Black/White
Model:FI8907W Model:FI8909W Model:FI8916W
Colour
：
Black/White Colour
：
Black/White Colour
：
Black/White
V1.1
Package Contents
IP Camera Power Adapter Resource CD
Ethernet Cable Mounting Bracket Wi-Fi Antenna
Quick Installation Guide Warranty Card
1 Hardware Introduction
Physical Description
Speaker
LENS
Infrared LED
Microphone
Antenna
Input
Output
Power light
Network light
Power
LAN
Differences
Model Pan/Tilt Antenna POE
FI8910W
√√
×
FI8918W
√√
×
FI8916W
√√
×
FI8907W
× √
×
FI8909W
× √
×
FI8910E
√× √
FI8918E
√× √
Hardware Connection
1. Mount the antenna and make it stand vertically(Only for the device with
external antenna).
2. Connect the camera to the LAN network (Router or Switch) via ethernet
cable.
3. Connect the power adapter to the camera.
Mounting Port
Reset Button
2 Software Installation
1. Insert the CD into the CD drive of your computer.
2. Go to the folder “IP Camera Search Tool” and find the folder “For Windows
OS”or “For Mac OS”. Copy and paste the IP camera tool file to your computer,
or drag it onto your Desktop.
Shortcut icon for Windows OS Shortcut icon for Mac OS
Note:
If your computer doesn’t have CD drive, you can download the latest IP
camera tool from our website for free.
3 Access the Camera
1. Enable the DHCP feature of your router (Enabled by default normally), then
open the IP Camera Tool program. It should display the camera’s IP address in
your LAN (Local Area Network).
2. Double click the camera list here, and your default browser will open up to
the camera’s login page.
Note:
There are three login methods. According to the figure prompted, choose a
different login mode.
Default user name is admin
with no password.
If you use IE browser,
select this login mode.
If you use Firefox, Google
Chrome, Safari, select this
login mode.
If you use Mobile phone,
select this login mode.
3. Take Microsoft Internet Explorer as an example.For the first time login the
camera,please make sure to install ActiveX when prompted.
4. Click Run button, and re-login the camera, you can see the live video on the
interface.
Click
Run
Click this button and
install
the ActiveX
4 Security
We strongly recommend that you modify your password when you login for the
first time.
To do this, choose “Device Management” on the bottom of the camera
interface, then go to the “Users Settings” section on the left side of the
screen.
Here you can change the User and Password to prevent intruders from
accessing your camera. The default username is admin with no password.
Note:
1. If you forget your username or password, you can press and hold the reset
button on the bottom of the camera using a pin for 5 seconds. This resets the
camera to factory defaults.
2. If you want to access your camera over wireless or the Internet, please
continue with the setup by following the Wireless Connection and Remote
Access steps below.
5 Wireless Connection Settings
1. Please choose “Device Management > Wireless LAN Settings”, click
“Wireless LAN Settings”.
2. Enable “Using Wireless LAN” on the “Wireless LAN Settings” page.
3. Click the Scan button and the camera will detect all WIFI devices around the
area. It should also display your router in the list.
4. Click the SSID of your router in the Wireless Network list, the
corresponding information (SSID & Encryption) will be filled in the SSID boxes
automatically.
5. You will only need to fill in the Share Key. Make sure that SSID, Encryption
and Share Key you filled in for the camera are exactly the same for your router
.
6. Please click the Submit button after all settings have been entered, the
camera will reboot. After the camera has completed the reboot process, wait
10 seconds and disconnect the ethernet cable.
6 Remote Access
If you need to access your IP camera outside of your LAN, you need to
configure some settings on your router. Please follow the corresponding steps:
1. Run the IP Camera Tool, and assign an IP address for your camera.
Click the SSID of router and SSID,
Encryption will be filled in the
following box automatically
Enter the same share key
with your router.
Right click your camera and
click Network Configuration.
Andere Handbücher für FI8910W
15
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Foscam Sicherheitskamera Handbücher
Foscam
Foscam G4EP Bedienungsanleitung
Foscam
Foscam FN3108XE-B4-1T Bedienungsanleitung
Foscam
Foscam G2EP Bedienungsanleitung
Foscam
Foscam FI8916W Bedienungsanleitung
Foscam
Foscam FI9902P Bedienungsanleitung
Foscam
Foscam HUNTVISION P2 Bedienungsanleitung
Foscam
Foscam R2 Bedienungsanleitung
Foscam
Foscam FI9938B Bedienungsanleitung
Foscam
Foscam FI9900P Bedienungsanleitung
Foscam
Foscam G2EP QJ2 FI9912EP Bedienungsanleitung
Foscam
Foscam FI9828W Bedienungsanleitung
Foscam
Foscam V8EP Bedienungsanleitung
Foscam
Foscam D2EP Bedienungsanleitung
Foscam
Foscam FI8601 Bedienungsanleitung
Foscam
Foscam FI9804W Bedienungsanleitung
Foscam
Foscam R4M Bedienungsanleitung
Foscam
Foscam FI9905B Bedienungsanleitung
Foscam
Foscam FI8919W Bedienungsanleitung
Foscam
Foscam FI9961EP Bedienungsanleitung
Foscam
Foscam X4 Bedienungsanleitung
