Foxwell BT715 Bedienungsanleitung
BT715 Battery Analyzer User’s Guide - English Version_V1.00
1
Trademarks
FOXWELL is trademark of Shenzhen Foxwell Technology Co., Ltd.
All other marks are trademarks or registered trademarks of their respective holders.
Copyright Information
©2020 Shenzhen Foxwell Technology Co., Ltd. All rights reserved.
Disclaimer
The information, specifications and illustrations in this manual are based on the latest information
available at the time of printing.
Foxwell reserves the right to make changes at any time without notice.
Visit our website at:
www.foxwelltech.us
For Technical Assistance, send us email at
support@foxwelltech.com
BT715 Battery Analyzer User’s Guide - English Version_V1.00
2
One-Year Limited Warranty
Subject to the conditions of this limited warranty, Shenzhen Foxwell Technology Co., Ltd
(“FOXWELL”) warrants its customer that this product is free of defects in material and
workmanship at the time of its original purchase for a subsequent period of one (1) year.
In the event this product fails to operate under normal use, during the warranty period, due to
defects in materials and workmanship, FOXWELL will, at its sole option, either repair or replace
the product in accordance with the terms and conditions stipulated herein.
Terms and Conditions
1 If FOXWELL repairs or replaces the product, the repaired or replaced product shall be
warranted for the remaining time of the original warranty period. No charge will be made to the
customer for replacement parts or labor charges incurred by FOXWELL in repairing or replacing
the defective parts.
2 The customer shall have no coverage or benefits under this limited warranty if any of the
following conditions are applicable:
a) The product has been subjected to abnormal use, abnormal conditions, improper storage,
exposure to moisture or dampness, unauthorized modifications, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of
FOXWELL, including damage caused by shipping.
b) The Product has been damaged from external causes such as collision with an object, or from
fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather
conditions, an Act of God, or battery leakage, theft, blown fuse, improper use of any electrical
source, or the product was used in combination or connection with other product, attachments,
supplies or consumables not manufactured or distributed by FOXWELL.
3 The customer shall bear the cost of shipping the product to FOXWELL. And FOXWELL shall
bear the cost of shipping the product back to the customer after the completion of service under
this limited warranty.
4 FOXWELL does not warrant uninterrupted or error-free operation of the product. If a problem
develops during the limited warranty period, the consumer shall take the following step-by-step
procedure:
BT715 Battery Analyzer User’s Guide - English Version_V1.00
3
a) The customer shall return the product to the place of purchase for repair or replacement
processing, contact your local FOXWELL distributor or visit our website www.foxwelltech.us to
get further information.
b) The customer shall include a return address, daytime phone number and/or fax number,
complete description of the problem and original invoice specifying date of purchase and serial
number.
c) The customer will be billed for any parts or labor charges not covered by this limited warranty.
d) FOXWELL will repair the Product under the limited warranty within 30 days after receipt of the
product. If FOXWELL cannot perform repairs covered under this limited warranty within 30 days,
or after a reasonable number of attempts to repair the same defect, FOXWELL at its option, will
provide a replacement product or refund the purchase price of the product less a reasonable
amount for usage.
e) If the product is returned during the limited warranty period, but the problem with the product
is not covered under the terms and conditions of this limited warranty, the customer will be
notified and given an estimate of the charges the customer must pay to have the product
repaired, with all shipping charges billed to the customer. If the estimate is refused, the product
will be returned freight collect. If the product is returned after the expiration of the limited
warranty period, FOXWELL’ normal service policies shall apply and the customer will be
responsible for all shipping charges.
5 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED
WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE
CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. FOXWELL SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED
TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE,
LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY
ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT
OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING
CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURC HASE OR USE
OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE
THEORY, EVEN IF FOXWELL KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. FOXWELL
BT715 Battery Analyzer User’s Guide - English Version_V1.00
4
SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED
WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING
REPAIRED.
6. Some states do not allow limitation of how long an implied warranty lasts, so the one-year
warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion
or limitation of incidental and consequential damages, so certain of the above limitations or
exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other rights which vary from state to state.
BT715 Battery Analyzer User’s Guide - English Version_V1.00
5
Safety Information
For your own safety and the safety of others, and to prevent damage to the equipment and
vehicles, read this manual thoroughly before operating your tester. The safety messages
presented below and throughout this user’s manual are reminders to the operator to exercise
extreme care when using this device. Always follow all BCI (Battery Council International) safety
recommendations. Read, understand and follow all safety messages and instructions in this
manual.
Safety Message Conventions Used
We provide safety messages to help prevent personal injury and equipment damage. Below are
signal words we used to indicate the hazard level in a condition.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or minor
injury to the operator or to bystanders.
Important Safety Instructions
And always use your tester as described in the user’s manual, and follow all safety messages.
Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals
know to the state of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
BT715 Battery Analyzer User’s Guide - English Version_V1.00
6
Table of Contents
ONE-YEAR LIMITED WARRANTY.................................................................................................................... 2
SAFETY INFORMATION......................................................................................................................................5
SAFETY MESSAGE CONVENTIONS USED............................................................................................................5
IMPORTANT SAFETY INSTRUCTIONS....................................................................................................................5
1 USING THIS MANUAL...................................................................................................................................... 7
1.1 BOLD TEXT.................................................................................................................................................... 7
1.2 SYMBOLS AND ICONS.................................................................................................................................... 7
1.2.1 Solid Spot.............................................................................................................................................7
1.2.2 Arrow Icon............................................................................................................................................7
1.2.3 Note and Important Message........................................................................................................... 7
2 INTRODUCTIONS.............................................................................................................................................. 8
2.1 TESTER DESCRIPTIONS.................................................................................................................................8
2.2 ACCESSORY DESCRIPTIONS......................................................................................................................... 9
2.3 SPECIFICATIONS.......................................................................................................................................... 10
3 OPERATIONS................................................................................................................................................... 10
3.1 CONNECTING THE TESTER.........................................................................................................................10
3.2 BATTERY TEST............................................................................................................................................ 11
3.3 CRANKING TEST..........................................................................................................................................16
3.4 CHARGING SYSTEM TEST........................................................................................................................... 17
4 LANGUAGE.......................................................................................................................................................18
5 VERSION INFO.................................................................................................................................................19
BT715 Battery Analyzer User’s Guide - English Version_V1.00
7
1 Using This Manual
We provide tool usage instructions in thismanual. Below is the conventions we used in the
manual.
1.1 Bold Text
Bold text is used to highlight selectable items such as buttons and menu options.
Example:
Press the ENTER button to select.
1.2 Symbols and Icons
1.2.1 Solid Spot
Operation tips and lists that apply to specific tool are introduced by a solid spot●.
Example:
When System Setup is selected, a menu that lists all available options displays. Menu options
include:
●Languages
●Unit
●Beep
●Keypad Test
●LCD Test
●About
●Shortcuts
1.2.2 Arrow Icon
An arrow icon indicates a procedure.
Example:
To change menu language:
1. Scroll with the arrow keys to highlight Language on the menu.
2.Press the ENTER button to select.
1.2.3 Note and Important Message
Note
A NOTE provides helpful information such as additional explanations, tips, and comments.
BT715 Battery Analyzer User’s Guide - English Version_V1.00
8
Example:
NOTE
Test results do not necessarily indicate a faulty component or system.
Important
IMPORTANT indicates a situation which, if not avoided, may result in damage to the test
equipment or vehicle.
Example:
IMPORTANT
Do not soak product as water might find its way into the tester.
2 Introductions
The latest BT-715 Battery Analyzer from Foxwell is dedicatedly developed to test 12V regular
flooded, AGM flat plate, AGM spiral and gel batteries and 12V & 24V starting and charging
system. It provides a quick, easy and affordable solution for technicians to check battery health
and detect faults of starting and charging system. Main functions includebattery test, cranking
test, and charging system test.
2.1 Tester Descriptions
This section illustrates external features, ports and connectors of the tester.
BT715 Battery Analyzer User’s Guide - English Version_V1.00
9
ALCD Display - shows menus, test results and operation tips.
BMenu Button - access the Main Menu options of the tester.
CBACK Button - exits a screen and generally returns to previous screen.
DUP and Down Buttons - selects an option or scroll to menu options.
ELeft and Right Buttons - moves the cursor left or right to select characters when inputting the
plate number of the car.
FENTER Button - executes a selected option and generally goes to the next screen.
GTest Cable - Connects the tester to battery for testing.
IMPORTANT
Do not use solvents such as alcohol to clean keypad or display. Use a mild nonabrasive
detergent and a soft cotton cloth.
2.2 Accessory Descriptions
This section lists the accessories that go with the tester. If you find any of the following items
missing from your package, contact your local dealer for assistance.
1User’s Guide - provides operation instructions for the usage of the tester.
BT715 Battery Analyzer User’s Guide - English Version_V1.00
10
2Blow molding case - stores the tester and its accessories.
2.3 Specifications
Display: 128 * 64 pixels, large, backlit display screen
Working Temperature: -20 to 60°C (-4 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Power Supply: 8-30VDC
Dimensions (L*W*H): 190*90*36mm
Gross Weight : 1.6 KG
3 Operations
This section describes how to use the tester to perform tests on car batteries and charging
systems. The menu-driven display will guide you step by step through the test process.
3.1 Connecting The Tester
The tester powers on automatically when it is correctly connected to the battery. The preferred
test position is at the battery terminals. If the battery is not accessible, you may test at the jumper
post; however, the power measurement may be lower than the actual value.
To connect the tester:
1. Clean the battery posts or side terminals.
2. Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-)
terminal.
3. Rock the clamps back and forth to make sure the clamps are firmly connected. In case the
connection is poor, a “CHECK CONNECTION” message displays.
4. When the tester is correctly connected, it boots up automatically and show the voltage of the
battery.
Inhaltsverzeichnis
Andere Foxwell Messgerät Handbücher
