Franke AQMXS0002 Bedienungsanleitung

Installation and operating instructions Montażi instrukcja obsługi

Notice de montage et de mise en service Monterings- og driftsvejledning

Instrucciones de montaje y uso Návod pro montáž a provoz

Istruzioni per il montaggio e l’uso Asennus- ja käyttöohje

Montage- en bedrijfsinstructies Инструкция по монтажу ивводу в

эксплуатацию

ZMI_001_2000110589-AQMXS0002_#SALL_#AQU_#V1.fm / 08.04.15

Franke Aquarotter GmbH, Germany

EA-Nr.: 7612982187599

FAR-Best.-Nr.: 2000110589

AQMXS0002

Inhaltsverzeichnis35.fm

...................................................................................... 3

Please refer to the graphics in the German Installation and

Operating Instructions.

...................................................................................... 10

Les graphiques sont disponibles dans la notice de montage et de

mise en service allemande.

...................................................................................... 17

Por favor, consulte los gráficos en las instrucciones alemanas de

montaje y uso.

...................................................................................... 24

Per le grafiche fare riferimento alle Istruzioni per il montaggio e

l’uso in tedesco.

...................................................................................... 31

De tekeningen kunt u in de Duitse montage- en bedrijfsinstructies

vinden.

...................................................................................... 38

Prosimy przyjąć grafikęz niemieckiej instrukcji montażu i obsługi.

...................................................................................... 45

Bilderna finns i den tyska monterings- och bruksanvisningen.

...................................................................................... 52

Obrázky najdete v nìmeckém návodu k montáži a obsluze.

...................................................................................... 59

Kuvat löydätte saksankielisestä asennus- ja käyttöohjeesta.

...................................................................................... 66

Рисунки приведены винструкции по монтажу иэксплуатации на

немецком языке.

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

0English

AQUAMIX-S self-closing single mixer for fitting unit

Please refer to the graphics in the German installation and operating instructions.

0Table of contents

1. Abbreviations and units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Important notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of product

5. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

6. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

7. Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

8. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

9. Installation example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly, function and commissioning

10. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

11. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

12. Adjusting the flow time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

13. Adjust the temperature limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Maintenance

14. Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

15. Replacing the filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

16. Replace the non-return valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

17. Replace the aerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

18. Replace the functional element . . . . . . . . . . . . . . . . . . . . . . . . . . 8

19. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

20. Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

1. Abbreviations and units

2. Key

Warning!

Failure to observe can result in bodily injury or even death.

Caution!

Failure to observe can result in material damage.

☞Important!

Failure to observe can cause the product to malfunction.

☞Useful information for optimal handling of the product.

3. Warranty

Liability is accepted in accordance with the General Terms and Conditions of

Business and Supply.

Use original spare parts only!

4. Important notes

• Installation, commissioning and maintenance are to be performed only by a

qualified expert in accordance with the provided instructions, legal requirements,

and the recognised engineering standards.

• All technical connection regulations specified by the local water and electricity

supply companies must be observed.

• We reserve the right to make changes.

5. Application

AQUAMIX-S self-closing single mixer for fitting unit. For connection to hot and cold

water supply. With one connection above the other. Self-closing mixing cartridge

with adjustable temperature stop. Adjustable flow time.

EA-Nr. International article number

FAR-Best.-Nr. Franke Aquarotter order number

Conversion 1 mm = 0.03937 inches

1 inch = 25.4 mm

All length specifications in the graphics are in mm.

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

6. Technical specifications

7. Scope of delivery

8. Dimensions

9. Installation example

10. Assembly

☞Important!

Note the installation position of the filters.

10.1

Insert the filters (a).

☞Important!

Take care that the hole of the tension bolt (b) is vertically aligned.

10.2

Insert the fitting (c) and secure with the grub screw (d).

11. Function

Water flow

11.1

Press the pressure cap.

• The water will flow.

• The water flow stops automatically once the preset flow time has expired.

☞The flow time is adjustable from 5-20 seconds.

Temperature selection

Minimum flow pressure: 1.0 bar

Recommended flow pressure: 3-5 bar

Maximum operating pressure: 10 bar

Volumetric flow: 0.06 l/s at a flow pressure of >1.0 bar

Calculation of flow rate: 0.06 l/s 0.06 l/s

Flow time at 38°C Adjustable from 5-20 seconds

Quantity Name

1 AQUAMIX-S self-closing single mixer

1 Installation and operating instructions

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

12. Adjusting the flow time

12.1

Undo the grub screw (a), using a hexagonal wrench.

12.2

Remove the pressure cap (c) and the spring (b).

12.3

Use a screwdriver to set the flow time.

+ longer flow time (max. 20 s)

– shorter flow time (min. 5 s)

12.4

Trigger the fitting to measure the flow time.

☞Important!

When putting the pressure cap in place, ensure that the tappet engages with the

corresponding groove.

12.5

Once the desired flow time has been set, put the pressure cap in place.

12.6

Reassemble in reverse order.

13. Adjust the temperature limits

Warning!

If the hot water supply temperature is above 45°C, the temperature limits should be set.

Failure to observe this instruction can result in injuries due to scalding.

☞The temperature limits are not an active scald protection.

13.1

Close the water supply.

13.2

Disconnect the fitting.

13.3

Turn the pressure cap (b) anti-clockwise up to the cold-water limit stop.

13.4

Undo the grub screw (a), using a hexagonal wrench.

13.5

Remove the pressure cap (b).

13.6

Remove the spring (e).

13.7

Loosen the housing nut (d), using a face spanner.

13.8

Remove the complete ball bearing (c).

13.9

Remove the temperature stop ring (f).

13.10

Turn the tappets (g) of the temperature stop ring (f) to the horizontal position and

insert them.

☞Important!

Take note of the installation of the complete ball bearing.

13.11

Insert the complete ball bearing (c).

13.12

Tighten the housing nut (d), using a face spanner.

13.13

Insert the spring (e).

☞Important!

When putting the pressure cap in place, ensure that the tappet engages with the

corresponding groove of the temperature stop ring.

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

13.14

Position the pressure cap (b).

13.15

Open the water supply.

13.16

Set the desired temperature.

Turning clockwise:

increases the mixer water temperature

Turning anti-clockwise:

reduces the mixer water temperature.

13.17

Close the water supply.

13.18

Remove the pressure cap (b) in the position in which it has been adjusted.

13.19

Remove the spring, the housing nut and the complete ball bearing (see step 13.6 to

13.8).

13.20

Remove the temperature stop ring (f).

13.21

Engage the side of the tappet (i) with the left side of the limit stop (h).

☞Important!

Take note of the installation of the complete ball bearing.

13.22

Insert the complete ball bearing (c).

13.23

Tighten the housing nut (d), using a face spanner.

13.24

Insert the spring (e).

☞Important!

When putting the pressure cap in place, ensure that the tappet engages with the

corresponding groove.

13.25

Position the pressure cap.

13.26

Secure the pressure cap (b) on the fitting, using the grub screw (a).

14. Maintenance and care

The fitting must be checked and maintained at regular intervals depending on the

water quality and in accordance with the local conditions, and rules and regulations

applicable at the site.

Maintain the following components:

• Aerator (see chapter 17.)

• Filters (see chapter 15.)

• Non-return valve (see chapter 16.)

Use suitable cleaning agents which are not harmful to the fitting in a proper manner

and rinse with water after use. High-pressure cleaners must not be used for

cleaning.

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

Remove the fitting

For some maintenance tasks, the fitting must be removed.

14.1

Close the water supply.

14.2

Disconnect the fitting.

14.3

Remove the grub screw (c) from the fitting.

14.4

Remove the fitting (a), using the guide sockets (b).

15. Replacing the filters

15.1

Remove the fitting (see chapter 14.).

15.2

Replace the filters (a).

☞Important!

Note the installation position of the filters.

15.3

Reassemble in reverse order.

16. Replace the non-return valve

Warning!

All non-return valves must be replaced at once.

Failure to observe this instruction can result in an increased germ load in the

drinking water and thus pose a health or mortality risk.

☞The non-return valve forms part of the guide socket (a).

16.1

Remove the fitting (see chapter 14.).

16.2

Replace the guide socket (a).

16.3

Reassemble in reverse order.

17. Replace the aerator

17.1

Remove the aerator, using an open-ended wrench.

17.2

Replace the aerator.

18. Replace the functional element

18.1

Disassemble the pressure cap up to the temperature stop ring (see step 13.1 to

13.9).

☞Important!

When removing the functional element, ensure that the cartridge (a) remains in the

fitting.

18.2

Replace the functional element (b).

18.3

Set the temperature limits (see chapter 13.).

ZMI_001_2000110589-AQMXS0002_#SEN_#AQU_#V1.fm

19. Troubleshooting

If you cannot rectify a fault or if it is not in the list, please contact our customer

service department.

20. Spare parts

Fault Cause Remedy

Water does not flow – Water supply closed ➯Restore it

– Functional element faulty ➯Replace it

Water flows continu-

ously

– Functional element faulty ➯Replace it

Water volume too low – Aerator calcified ➯Clean it

– Supply pressure too low ➯Check it

– Dirty filters/non-return valves ➯Clean it

– Water supply not fully open ➯Open it

Water too hot – Temperature limit set incorrectly or

not set

➯Set it

– Cold water supply cut off ➯Open it

– Filter/non-return valve in cold-water

connection faulty

➯Replace it

Water too cold – Temperature limit set incorrectly or

not set

➯Set it

– Filter/non-return valve in hot-water

connection faulty

➯Replace it

– Hot water flow blocked ➯Open it

Description Order No.

1 Pressure cap. . . . . . . . . . . . . . . . . 2000105624

2 Spare parts kit:

Temperature stop

Threaded ring

Ball bearing . . . . . . . . . . . . . . . 2000104913

3 Functional element . . . . . . . . . . . . 2000104357

4 Aerator (VPE 10x). . . . . . . . . . . . . 2000109130

5 Guide socket complete . . . . . . . . . 2030023924

6 Filters (VPE 10x). . . . . . . . . . . . . . 2000104702

ZMI_001_2000110589-AQMXS0002_#SFR_#AQU_#V1.fm

0Français

Mitigeur à fermeture automatique AQUAMIX-S pour unité de robinetterie

Les graphiques figurent dans la notice de montage et de mise en service allemande.

0Table des matières

1. Abréviations et unités . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2. Pictogrammes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3. Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Remarques importantes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Description du produit

5. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Caractéristiques techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

7. Contenu de la livraison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

8. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

9. Exemple d’installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Montage, fonctionnement et mise en service

10. Montage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

11. Fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

12. Régler la durée d’écoulement. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

13. Régler la limitation de température. . . . . . . . . . . . . . . . . . . . . . . . 13

Entretien

14. Maintenance et entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

15. Remplacer les filtres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

16. Remplacer le clapet de non-retour . . . . . . . . . . . . . . . . . . . . . . . . 15

17. Remplacer le gazéificateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

18. Remplacer la partie fonctionnelle . . . . . . . . . . . . . . . . . . . . . . . . . 15

19. Dépannage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

20. Pièces de rechange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Franke Sanitärprodukte Handbücher

Franke

Franke MIRANIT F5ET2025 Bedienungsanleitung

Franke

Franke ARIA 115.0158.975 SilkSteel PVD Bedienungsanleitung

Franke

Franke F5 Series Bedienungsanleitung

Franke

Franke ZAQCT0002 Bedienungsanleitung

Franke

Franke AQUA 210 P Bedienungsanleitung

Franke

Franke F5 F5LT1010 Bedienungsanleitung

Franke

Franke F5 Series Bedienungsanleitung

Franke

Franke AQUA 555 Bedienungsanleitung

Franke

Franke RONDA ZANMW0030 Bedienungsanleitung

Franke

Franke HWTE100 Bedienungsanleitung

Franke

Franke EXOS Series Bedienungsanleitung

Franke

Franke 7612982077265 Bedienungsanleitung

Franke

Franke F5 F5ST2004 Bedienungsanleitung

Franke

Franke F5LT2028 2030066548 Bedienungsanleitung

Franke

Franke AQUA555 Bedienungsanleitung

Franke

Franke RODX627H Bedienungsanleitung

Franke

Franke FF2200 Series Bedienungsanleitung

Franke

Franke ZFAID696 Bedienungsanleitung

Franke

Franke F5 Series Bedienungsanleitung

Franke

Franke SIRIUS SIRW771 Bedienungsanleitung

Franke

Franke AQRM556 Bedienungsanleitung

Franke

Franke F5EM1011 Bedienungsanleitung

Franke

Franke Kite KID 611-86 Bedienungsanleitung

Franke

Franke AQUA401 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema