FRONIUS TS 5kA-3 Bedienungsanleitung

Fronius prints on elemental chlorine free paper (ECF) sourced from certified sustainable forests (FSC).

/ Perfect Charging / Perfect Welding / Solar Energy

Fronius Smart Meter TS 5kA-3

Operating instructions

PV system monitoring

42,0426,0348,EN 008-27112020

www.youtube.com/FroniusSolar

LEARN MORE WITH

OUR HOW-TO VIDEOS

Contents

Safety rules 5

Safety rules 7

Explanation of safety notices 7

General 7

Environmental conditions 8

Qualified personnel 8

Data protection 8

General information 9

Fronius Smart Meter TS 5kA-3 11

Device description 11

Information on the device 12

Intended use 12

Scope of supply 13

Positioning 13

Measuring accuracy 14

Installation 15

Installation 17

Checklist for installation 17

Installation 18

Protective circuit 18

Auxiliary power supply cabling 18

Cabling 19

Selection criteria for current transformer 21

Connecting the current transformers 22

Suitable voltage transformers 22

Connecting the data communication cable to the inverter 22

Terminating resistors - Explanation of symbols 23

Connecting the terminating resistor 24

Terminating resistors 24

Mounting the connection cover 25

Multi-meter system - Explanation of symbols 26

Multi-meter system 26

Menu structure and parameters 27

Setting the transformation ratio of the current and voltage transformers 29

Setting the address on the Fronius Smart Meter TS 30

Start-up 31

Fronius SnapINverter 33

General 33

Connecting to the Fronius Datamanager 33

Configuring the Fronius Smart Meter TS as the primary meter 33

Configuring the Fronius Smart Meter TS as a secondary meter 34

Fronius GEN24 inverter 35

General 35

Installation using the web browser 35

Configuring the Fronius Smart Meter TS as the primary meter 36

Configuring the Fronius Smart Meter TS as a secondary meter 36

Technical data 37

Fronius manufacturer's warranty 39

Safety rules

Explanation of

safety notices DANGER!

Indicates immediate danger.

▶If not avoided, death or serious injury will result.

WARNING!

Indicates a potentially hazardous situation.

▶If not avoided, death or serious injury may result.

CAUTION!

Indicates a situation where damage or injury could occur.

▶If not avoided, minor injury and/or damage to property may result.

NOTE!

Indicates a risk of flawed results and possible damage to the equipment.

General The device has been manufactured in line with the state of the art and according to

recognized safety standards. If used incorrectly or misused, however, it can cause:

- Injury or death to the operator or a third party

- Damage to the device and other material assets belonging to the operating com-

pany.

All personnel involved in commissioning, maintenance, and servicing of the device must:

- Be suitably qualified

- Have knowledge of and experience in dealing with electrical installations and

- Have fully read and precisely followed these Operating Instructions

The Operating Instructions must always be at hand wherever the device is being used. In

addition to the Operating Instructions, attention must also be paid to any generally

applicable and local regulations regarding accident prevention and environmental protec-

tion.

All safety and danger notices on the device:

- Must be kept in a legible state

- Must not be damaged

- Must not be removed

- Must not be covered, pasted or painted over

The terminals can reach high temperatures.

Only operate the device when all protection devices are fully functional. If the protection

devices are not fully functional, there is a danger of:

- Injury or death to the operator or a third party

- Damage to the device and other material assets belonging to the operating company

Any safety devices that are not fully functional must be repaired by an authorised spe-

cialist before the device is switched on.

Never bypass or disable protection devices.

For the location of the safety and danger notices on the device, refer to the section

headed "General remarks" in the Operating Instructions for the device.

Any equipment malfunctions which might impair safety must be remedied before the

device is turned on.

This is for your personal safety!

Environmental

conditions

Operation or storage of the device outside the stipulated area will be deemed as not in

accordance with the intended purpose. The manufacturer accepts no liability for any

damage resulting from improper use.

Qualified person-

nel

The servicing information contained in these operating instructions is intended only for

the use of qualified service engineers. An electric shock can be fatal. Do not carry out

any actions other than those described in the documentation. This also applies to quali-

fied personnel.

All cables and leads must be secured, undamaged, insulated and adequately dimen-

sioned. Loose connections, scorched, damaged or inadequately dimensioned cables and

leads must be immediately repaired by authorised personnel.

Maintenance and repair work must only be carried out by an authorised specialist.

It is impossible to guarantee that bought-in parts are designed and manufactured to meet

the demands made on them, or that they satisfy safety requirements. Use only original

spare parts (also applies to standard parts).

Do not carry out any alterations, installations, or modifications to the device without first

obtaining the manufacturer's permission.

Components that are not in perfect condition must be changed immediately.

The text and illustrations are all technically correct at the time of printing. We reserve the

right to make changes. The contents of the operating instructions shall not provide the

basis for any claims whatsoever on the part of the purchaser. If you have any sugges-

tions for improvement, or can point out any mistakes that you have found in the instruc-

tions, we will be most grateful for your comments.

Data protection The user is responsible for the safekeeping of any changes made to the factory settings.

The manufacturer accepts no liability for any deleted personal settings.

General information

Andere Handbücher für TS 5kA-3

Inhaltsverzeichnis

Andere FRONIUS Messgerät Handbücher

FRONIUS

FRONIUS DC Box 60/12 MET Bedienungsanleitung

FRONIUS

FRONIUS TS 65A-3 Bedienungsanleitung

FRONIUS

FRONIUS RI FB PRO/i Bedienungsanleitung

FRONIUS

FRONIUS String Control 100/12 Bedienungsanleitung

FRONIUS

FRONIUS 63A-3 Bedienungsanleitung

FRONIUS

FRONIUS 63A-3 Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter 240V-3 UL Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter TS 5kA-3 Bedienungsanleitung

FRONIUS

FRONIUS 63A-1 Bedienungsanleitung

FRONIUS

FRONIUS LaserHybrid WF 25i Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter 50kA-3 Bedienungsanleitung

FRONIUS

FRONIUS TS 65A-3 Bedienungsanleitung

FRONIUS

FRONIUS 63A-1 Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter 63A Bedienungsanleitung

FRONIUS

FRONIUS Datamanager 2.0 Bedienungsanleitung

FRONIUS

FRONIUS String Control 100/12 MET Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter 50kA-3 Bedienungsanleitung

FRONIUS

FRONIUS WR Bedienungsanleitung

FRONIUS

FRONIUS 63A-1 Bedienungsanleitung

FRONIUS

FRONIUS TS 5kA-3 Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter TS Series Bedienungsanleitung

FRONIUS

FRONIUS TS 5kA-3 Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter TS 65A-3 Bedienungsanleitung

FRONIUS

FRONIUS Smart Meter 240V-3 UL Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

FRO­NIUS TS 5kA-3 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

FRONIUS TS 5kA-3 Bedienungsanleitung