Fromm FSW10 Bedienungsanleitung
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 1
FSW10 Pallet Wrapping Machine
OPERATION MANUAL
Machine Semi-
A
utomatic Pallet Wrapping Machine
Model FSW10
Date Septembe
r
2017
Issue FPA001
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 1
CONTENTS
1. General Information 2
1.1 Note of Installation 2
1.2 Notice of Operation 2
2. Specification 3
2.1 Specification Table 3
2.2 Machine Dimensions 4
2.3 Machine Description 5
3. Operation 6
3.1 Operation of Control Panel 6
3.2 Control button explanation 7
3.3 How to run a Wrapping Cycle 9
3.4 Illustration for Film Threading 10
3.5 Stretch tension adjust knob 10
3.6 Film quick release description 11
4. Electrical 11
4.1 Electrical Capacity 11
5. Suggested Maintenance and Trouble Shooting 12
5.1 Suggested Maintenance 12
5.2 Warranty Periods 12
5.3 Fromm Service Solutions 12
5.4 Possible Troubleshooting Causes and Remedies 13
6. Contact Fromm Packaging 14
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 2
1. GENERAL INFORMATION
Congratulations on the purchase of your Fromm Semi-Automatic Pallet Wrapping Machine.
We trust you will have many years of packaging efficiency.
Before proceeding with the operation or installation of your new machine please read this
manual thoroughly and gain a full understanding of the requirements, features and
operation of your new machine.
1.1 Note of Installation
To make sure a safe and correct operation, please check below conditions before install the
machine:
1. Power source capacity must be equal of the machine need.
2. Machine standard power is 240V (+- 10%).
3. Machine standard power Hertz is 50Hz. (+- 2%).
4. Machine is workable under the temperature between 0 - 45.
5. Make sure the wire is tidy on the ground.
6. There should not be any vibration beside the machine, make sure the ground is flat.
1.2 Notice of Operation
To have good protection for the operator, please make sure the following conditions:
1. Before operating, please read the machine operational manual carefully.
2. Make sure there is no object put on the power cable.
3. Make sure there is no object put on the upper elevator unit.
4. Avoid any damp object or water around the electric parts.
5. Avoid film winded underneath the turntable.
6. Do not stand on or across the machine during operation.
7. When problem occurs, please read section - Suggested Maintenance and Trouble
Shooting.
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 3
2. SPECIFICATION
2.1 Specification Table
Model FSW-10
Turntable Speed 10 RPM
Turntable diameter 1500mm
Max wrapping height 2200mm
Pallet size 1050x1050mm
Max loading weight 1200kgs
Film stretch (%) Infinite / manual adjust
Max. film spec. ∮250x500mm
Turntable height 76mm
Ramp (slope) spec. 1165x1000m
Machine size 2300x1500x2346mm.
Machine net weight 335kg
Options:
1.65m turntable diameter (max loading weight 1650kg).
2.6m and 3m wrapping height.
Ramp.
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 4
2.2 Machine Dimensions
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 5
2.3 Machine Description
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 6
3. OPERATION
3.1 Operation of the control panel
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 7
3.2 Control Button Explanations
A. MAIN POWER
To switch ON and OFF the power.
B. POWER INDICATOR
Show that power is ON when light illuminates.
Machine Running, LED "Continue Flash"
Power Cut circuit (EMG, KEY, ETC) Flash Twice.
C. MODE SELECTIONS
This selector is to choose the number of top and bottom.
Mode 1: Top 2 wraps, bottom 3 wraps.
Mode 2: Top 3 wraps, bottom 4 wraps.
D. START
Press the button to start the cycle (automatic program).
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 8
E. PAUSE
During the wrapping cycle, if the machine is
required to be stopped press (E) button to pause
the cyclee and press (D) button to resume back to
operation.
F. EMERGENCY STOP
Press the button for emergency stop. For security
consideration, the turntable will not stop instantly
when the EMERGENCY STOP button is pressed.
When the turntable power is off, the brake will
release.
FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 9
3.3 How to run a wrapping cycle
1. Turn the main power switch (A) to the ON position and check if the Power Light
illuminates.
2. Select the top and bottom wraps with selector switch (C) (wrapping cycle).
Mode 1: 3 bottom wraps and 2 top wraps.
Mode 2: 4 bottom wraps and 3 top wraps.
Please note: During the machine operation, there is no need to stop the machine, to change
the wrapping mode.
3. Press the Start button (D) to start wrapping the pack.
4. During the wrapping cycle, if the machine is required to be stopped, press the stop button
(E) to pause the machine, then press start button (D) to resume back to operation.
5. When the wrapping cycle is finished, the carriage will return back to the bottom of the
machine and stop automatically.
6. Return to Operation Cycle step 2, Start the Button Wrapping Cycle.
7. Please turn OFF the main power switch (A) when the machine is no longer in use.
Please press the emergency stop button (F) to stop the machine instantly, if any Emergency
has occurs.
SECURITY BAR
If the security switch is activated, the machine will stop moving. Make sure you have cleared the
security bar to reset the security switch. Press the START button to continue wrapping cycle.
Inhaltsverzeichnis
Andere Fromm Verpackungsanlagen Handbücher
Fromm
Fromm P380 Bedienungsanleitung
Fromm
Fromm AP250 Bedienungsanleitung
Fromm
Fromm P328S Bedienungsanleitung
Fromm
Fromm P355.0001.01 Bedienungsanleitung
Fromm
Fromm FS15 Series Bedienungsanleitung
Fromm
Fromm FS13 Series Bedienungsanleitung
Fromm
Fromm P329 M/HA Leitfaden
Fromm
Fromm FS11 Series Bedienungsanleitung
Fromm
Fromm P326 Leitfaden
Fromm
Fromm A332 Bedienungsanleitung
Fromm
Fromm P329 M Bedienungsanleitung
Fromm
Fromm TP-601D1 Leitfaden
Fromm
Fromm P356.0001.01 Bedienungsanleitung
Fromm
Fromm FS33 Series Bedienungsanleitung
Fromm
Fromm P328 A/A Bedienungsanleitung
Fromm
Fromm P328 Leitfaden
Fromm
Fromm P328S Bedienungsanleitung
Fromm
Fromm P300 Bedienungsanleitung
Fromm
Fromm FS31 Series Bedienungsanleitung
Fromm
Fromm P328 M Bedienungsanleitung
