Fujitsu D3031 Bedienungsanleitung
Technical Manual - English
System Board D3031
for PRIMERGY RX200 S6
Technical Manual
Edition August 2010
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2010 FujitsuTechnologySolutionsGmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.
D3031 (RX200 S6) Technical Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the product
is used in a hot environment. The customer shall bear the cost of replacing
replaceable components which have exceeded their operating life. Note that
these are only guidelines, and do not constitute a guarantee of trouble-free
operation during the maintenance support period.
High safety use
This product has been designed and manufactured for general uses such as
general office use, personal use, domestic use and normal industrial use. It has
not been designed or manufactured for uses which demand an extremely high
level of safety and carry a direct and serious risk to life or body if such safety
cannot be ensured.
Technical Manual D3031 (RX200 S6)
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance control
in weapons systems (hereafter, "high safety use"). Customers should not use
this product for high safety use unless measures are in place for ensuring the
level of safety demanded of such use. Please consult the sales staff of Fujitsu if
intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://primeserver.fujitsu.com/primergy/harddisk/
D3031 (RX200 S6) Technical Manual
Only for the Japanese market:
IAlthough described in this manual, some sections do not apply to the
Japanese market. These options and routines include:
– CSS (Customer Self Service)
–Replacing the lithium battery
Technical Manual D3031 (RX200 S6)
D3031 (RX200 S6) Technical Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . . 9
2 Important information . . . . . . . . . . . . . . . . . . . . . 11
2.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 CE certificate of conformity . . . . . . . . . . . . . . . . . . 14
2.3 Environmental protection . . . . . . . . . . . . . . . . . . . 15
3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.2 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2.1 Module population . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2.2 Modes of operation . . . . . . . . . . . . . . . . . . . . . . . 22
3.2.3 LV-DIMM support . . . . . . . . . . . . . . . . . . . . . . . . 23
3.3 PCI slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.4 Screen resolution . . . . . . . . . . . . . . . . . . . . . . . 25
3.5 Temperature / system monitoring . . . . . . . . . . . . . . . 26
3.6 Connectors and indicators . . . . . . . . . . . . . . . . . . 27
3.6.1 System board . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.6.2 Connector panel . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.7 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3.7.1 Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3.7.2 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4 Replacing the lithium battery . . . . . . . . . . . . . . . . . 37
Technical Manual D3031 (RX200 S6)
Contents
D3031 (RX200 S6) Technical Manual 9
1 Introduction
This technical manual describes the system board D3031, which can be
equipped with up to two processors.
For additional driver information (if available), refer to the Readme files located
on the server hard disk and on the supplied DVDs (see Installation DVD of
ServerView Suite - ServerView Software Products).
You will find further information about the BIOS setup in the "D3031 BIOS Setup
Utility for PRIMERGY RX200 S6" manual.
IPRIMERGY manuals are available in PDF format on the
ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the
ServerView Suite supplied with every server.
PRIMERGY Abbreviations and Glossary can also be found on the
ServerView Suite DVD 2.
1.1 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.
10 Technical Manual D3031 (RX200 S6)
Introduction
Inhaltsverzeichnis
Andere Fujitsu Hauptplatine Handbücher
Fujitsu
Fujitsu D3231 Bedienungsanleitung
Fujitsu
Fujitsu D2151 Bedienungsanleitung
Fujitsu
Fujitsu F2MC-8FX Series Montage- und Bedienungsanleitung
Fujitsu
Fujitsu FLASH-CAN-100 Bedienungsanleitung
Fujitsu
Fujitsu D2861 Bedienungsanleitung
Fujitsu
Fujitsu D1451 Bedienungsanleitung
Fujitsu
Fujitsu D3141 Bedienungsanleitung
Fujitsu
Fujitsu MB91360 SERIES Bedienungsanleitung
Fujitsu
Fujitsu D3664 Bedienungsanleitung
Fujitsu
Fujitsu D2759 Bedienungsanleitung
Fujitsu
Fujitsu D3230 Bedienungsanleitung
Fujitsu
Fujitsu MB91470 SERIES Bedienungsanleitung
Fujitsu
Fujitsu CW35 Series Bedienungsanleitung
Fujitsu
Fujitsu D3220 Bedienungsanleitung
Fujitsu
Fujitsu MB91460 SERIES Bedienungsanleitung
Fujitsu
Fujitsu SK-91464A-100PMC Bedienungsanleitung
Fujitsu
Fujitsu D3030 Bedienungsanleitung
Fujitsu
Fujitsu SK-8FX-TSC-32PMC Bedienungsanleitung
Fujitsu
Fujitsu Siemens D1156 Bedienungsanleitung
Fujitsu
Fujitsu D2119 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
