Fujitsu FTP-637MCL401 Bedienungsanleitung
1
FTP-637MCL401/601
nOverview
The FTP-637 MCL Series are 24V driven high-speed printers
with a ultra low prole auto cutter and long life.
The FTP-637 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.
nHiGHLiGHTS
• Ultralowprole
Height 21.8 mm, width 103.2/104.5 mm, depth 42.2 mm
• Highspeedprinting
It can print at 100/150 mm/s maximum by using Fujitsu's
unique head drive control.
• AutoCutter
Long life and high reliable guilotine with dedicated motor.
• Easypapersetting
Our lever platen release mechanism allows a
wide paper route, so paper can be easily inserted.
Conventional auto loading is also available.
• Multifunctionaldie-castframe
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
• RoHScompliant
FTP-637MCL401/601
24v driveN, FTP-607 Series
3” HiGH SPeed THerMaL PriNTer
FTP-637MCL401/601
FTP-637DSL291
FTP-637DSL601R
2
FTP-637MCL401/601
nParT NuMberS
nSPeCiFiCaTiONS
Part number FTP-637MCL401/601
Printing method Thermal-line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
Number of columns ANK 48 columns/line (maximum 12 x 24 dot font)
Paper width 80 mm
Paper thickness 60 to 85 µm (some paper in this range may not be used because of
paper characteristics)
Printing Speed MCL401 Maximum 100mm/sec. (800 dot line/sec.)
MCL601 Maximum 150mm/sec. (1,200 dot line/sec.)
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
12 × 24 dots, (1.5 × 3.0 mm), 48 columns: ANK
24 × 24 dots, (3.0 × 3.0 mm), 24 columns: ANK
8 × 16 dots, (1.0 × 2.0 mm), 72 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 36 columns: ANK
SpecicationsItem
Character types
Character, dimensions (W×H), number of
columns
Part Number
Easy Load Model with low prole cutter FTP-637MCL401
FTP-637MCL601
LSI for driving MCL401 FTP-627CU301R
MCL601 FTP-627CU601R
Interface
board for
Mech/Cutter
Cutter
supported
MCL401 FTP-637DSL291R Parallel (Centronics) /Serial (RS-232C)
MCL601 FTP-627DSL601R Serial (RS-232C) / USB
MCL401 FTP-637DSL623R USB (V 1.1)
FTP-637DSL625R Serial (RS-232C)
MCL601 FTP-637DSL633R USB (V 1.1)
FTP-637DSL635R Serial (RS-232C)/
Interface
cables
Parallel (Centronics) FTP-628Y202
Serial (RS232C) FTP-628Y302
USB FTP-629Y301
Power
cables
Logic FTP-629Y401
Head, motor FTP-629Y601
3
FTP-637MCL401/601
nSPeCiFiCaTiONS
*+5˚C to +40˚C printing density assurance rance.
Item Specication
Interface Conforms to RS232C/Centronics
Power
supply
For print
head
MCL401 24 VDC average current, 0.7A (1.3A peak)
MCL601 24 VDC average current, 1.3A (2.5 A peak)
(print ratio: 12.5%, print speed 100mm/sec.)
For motor 24 VDC ±5%, 1.0 A maximum
For cutter MCL401 24 VDC ±5%, 1.1 A maximum
MCL601 24 VDC ±5%, 1.3 A maximum
For logic 3.3 to 5.25 VDC, 0.2 A maximum
Dimensions Mechanism with cutter 104.5 x 42.2 x 21.8 mm (WxDxH)
Interface
board
DSL291 70 x 60 x 12 mm (WxDxH)
DSL6xx 95 x 70 x 21.6 mm (WxDxH)
Weight Mechanism with cutter Approximately 118g/122g
Interface board Approximately 50g / 50g
Life Head MCL401 Pulse durability: 50 million pulses/dot (print ratio: 12.5% or less).
MCL601 Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less).
MCL401 Abrasion resistance: paper traveling distance 50km
MCL601 Abrasion resistance: paper feed length 100km.
Cutter MCL401 500,000 cuts
MCL601 1,000,000 cuts
Platen 5,000 times (open/close)
Operating
environment
Operating temperature* 0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC (paper not included)
Storage humidity 5 to 95% RH (no condensation)
Detection
function
Head temperature detection Detected by thermistor
Paper out/mark detection Detected by photo-interruptor
Platen release Detected by sliding switch
Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper),
FTP-020PU001 (58mm)
PD150R (Oji paper)
FTP-020PU701 (58mm)
Medium life paper TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
Long life paper PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
4
FTP-637MCL401/601
nFuNCTiON OF iNTerFaCe bOard
ndiMeNSiONS
1.Printermechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specied).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-637MCL401/601
11degrees
27.7
1.6
103.2 / 104.5
55
28.3 (29.3 max.)
21.8
10.7
5.4
(42.2)
11.6
36.0
90.4
13.1
22.1
13.9 (14.4 max.)
7.5
Center of paper
Center of mechanism
Item Item
1. Test print function 8. Cutter trouble detect
2. Paper out detection 9. Motor power saving function
3. Paper near end detection 10. Mark detection function
4. Paten open detection 11. MCU operation abnormality detection
5. Thermal head temperature abnormality
detection 12. Power ON/OFF sequence protection
6. Blow-out fuse detection 13. Motor over-current protection
7. Head voltage abnormality detection 14. Hardware timer
5
FTP-637MCL401/601
1.Connector(FPC)specication(CN4)
(1) Connector
Mechanical unit side: FPC connector
Remote side (housing site): 52610-3071 (made by Molex)
(2) Pin assignment on the mechanical side
G —
V
M I
M I
M I
M I
oN langiS O/I stnetnoC
1 KHP — )edohtaC(retpurretniotohP
2 NESV I rosnesrepaprofylppusrewopdnuorG
3 EHP O )rottimE(retpurretniotohP
4 HV I rewopevirddaeH
5 HV I rewopevirddaeH
6 HV I rewopevirddaeH
7 ID I tupniataD
8 3BTS I 3ebortS
9 4BTS I 4ebortS
01 DD rewoPcigoL
11 DN dnuorgdaeH
21 DNG — dnuorgdaeH
31 DNG — dnuorgdaeH
41 DNG — rewopevirddaeH
51 DNG — rewopevirddaeH
61 DNG — rewopevirddaeH
71 MT O rotsimrehT
81 1BTS I 1ebortS
91 2BTS I 2ebortS
02 TAL I hctaLataD
12 KLC I kcolC
22 HV I rewopevirddaeH
32 HV I rewopevirddaeH
42 HV I rewopevirddaeH
52 WS — hctiwsneponetalP
62 WS — hctiwsneponetalP
72 AT AlangiseticxerotoM
82 AT AlangiseticxerotoM
92 BT BlangiseticxerotoM
03 BT BlangiseticxerotoM
6
FTP-637MCL401/601
Platen unit
Thermal head
Motor
Sensor (Photo-
interruptor)
30, 29, .....................2,1
Connector No
(FPC pin numbers)
FPC
Connect terminal:
surface side
2.Cutter(CN5)
Connector on control circuit side: 52610-0871 Molex or equivalent
M I
M I
3 KP
M 8
M I
M I
N —
.oN langiS O/I stnetnoC .oN langiS O/I stnetnoC
1 NESV I rewoprosnesrepaP 2 EHP O )rottime(rotpurretniotohP
H )edohtac(rotpurretniotohP 4 AT AlangiseticxerotoM
5 AT AlangiseticxerotoM 6 BT BlangiseticxerotoM
7 BT Blangiseticxeroto C detcennoctoN
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
NorthandSouthAmerica
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
AsiaPacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
FujitsuComponentsInternationalHeadquarterOfces
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.
Rev. February 27, 2009.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Fujitsu Drucker Handbücher
Fujitsu
Fujitsu FTP-628WSL210 Series Bedienungsanleitung
Fujitsu
Fujitsu DL-3800 Bedienungsanleitung
Fujitsu
Fujitsu N7100E Bedienungsanleitung
Fujitsu
Fujitsu Breeze 100 Bedienungsanleitung
Fujitsu
Fujitsu FTP-639MCL054 Bedienungsanleitung
Fujitsu
Fujitsu FTP-627 Series Bedienungsanleitung
Fujitsu
Fujitsu FTP-628WSL110 Bedienungsanleitung
Fujitsu
Fujitsu FP-1000 Bedienungsanleitung
Fujitsu
Fujitsu ScanSnap S500 Konfigurationshandbuch
Fujitsu
Fujitsu FTP-628WSL120 Bedienungsanleitung
Fujitsu
Fujitsu DL7400 Bedienungsanleitung
Fujitsu
Fujitsu ApeosPrint C4030 Bedienungsanleitung
Fujitsu
Fujitsu PrintPartner 20W Bedienungsanleitung
Fujitsu
Fujitsu RS-232C Bedienungsanleitung
Fujitsu
Fujitsu fi-748PRB Handbuch
Fujitsu
Fujitsu Impact 3650 Bedienungsanleitung
Fujitsu
Fujitsu 628WSL110H2 Bedienungsanleitung
Fujitsu
Fujitsu DL1100 Bedienungsanleitung
Fujitsu
Fujitsu FTP-638WSL110 Series Bedienungsanleitung
Fujitsu
Fujitsu FTP-623DCL002 Bedienungsanleitung
