Fujitsu FI-4120C Konfigurationshandbuch

Cleaning and Maintenance

fi-4120C Image Scanner

P3PC-E007-01EN

DAILY CARE

5DAILY CARE

This chapter describes how to clean the scanner.

5.1 Cleaning Materials and Locations and Cleaning Cycle

...................................................................................... 56

5.2 Cleaning the ADF........................................................ 58

WARNING

When cleaning the scanner, turn off the

power, and unplug the AC cable from the

outlet.

56 5.1 Cleaning Materials and Locations and Cleaning Cycle

5.1 Cleaning Materials and

Locations and Cleaning Cycle

■

■■

■Cleaning Materials

The table below shows the cleaning materials that re used on this

scanner.

For details on Cleaner F1, consult the agent where you bought your

scanner.

■

■■

■Locations That Needs To Be Cleaned

Same location in the ADF must be cleaned regularly with a soft, dry

cloth moistened with Cleaner F1.

Cleaning Materials Remarks

Cleaner F1

(or isopropyl alcohol)

1 bottle

Moisten cloth with this fluid and wipe

the scanner clean.

Soft, dry cloth

5.1 Cleaning Materials and Locations and Cleaning Cycle 57

DAILY CARE

■

■■

■Cleaning Cycle

The following table shows the standard cleaning cycle for each

location that needs to be cleaned.

Location Standard Cleaning Cycle

Pad ASY Clean every 1000 scanned sheets.

Pick roller

Feed roller

Plastic roller

Sheet guide

Glass

ATTENTION

The scanner must be cleaned more frequently

when the following documents are used:

•Documents of coated paper

•Documents with printed text or graphics

almost covering the entire surface

•Chemically treated documents such as

carbonless paper

•Documents containing a large amount of

calcium carbonate

•Documents with lots of pencil-written areas

58 5.2 Cleaning the ADF

5.2 Cleaning the ADF

As a rule, clean the ADF every 1,000 scanned sheets. This,

however, depends on the type of document you are scanning. For

example, the ADF sometimes must be cleaned more frequently

when toner has not sufficiently adhered to the document.

■

■■

■Cleaning the ADF

The following parts needs to be cleaned in the ADF unit:

•Pad ASY

•Pick roller

•Feed roller

•Plastic roller

•Sheet guide

•Glass

CAUTION

When the scanner is in use, the surface of the

glass inside the ADF becomes hot.

Before cleaning ADF, disconnect the AC

adapter from the power outlet, and wait at

least 15 minutes for the glass to cool down.

5.2 Cleaning the ADF 59

DAILY CARE

The following shows the procedure for cleaning the ADF.

1. Open the ADF by pushing on the ADF button and

turning the ADF cover to the front.

CAUTION

Be careful, the ADF cover may close and

pinch your finger.

ADF button

The front portion

60 5.2 Cleaning the ADF

2. Clean the following locations with a soft, dry

cloth moistened with Cleaner F1.

Pick roller (One pieces)

Plastic rollers (Four pieces)

Sheet guide

(A white portion,

Two parts)

Glass(Two parts)

Feed rollers (Four pieces)

Pad ASY

5.2 Cleaning the ADF 61

DAILY CARE

•Pad ASY

Clean the Pad ASY (rubber surface) downwards (direction of

arrow). When doing this, take care not to catch the pick

springs to avoid bending.

•Pick roller

Lightly clean the Pick rollers taking care not to scratch the

roller surfaces and the Mylar sheet. Take particular care when

cleaning these rollers, as black foreign matter on these rollers

affects document pick performance.

Pick spring

The portion to clean

Mylar sheet (Transparent)

62 5.2 Cleaning the ADF

•Feed roller

Follow the procedure below while rotating the Feed rollers to

clean the rollers.

1) Open the ADF by pushing on the ADF button and

turning the ADF cover to the front.

Open the ADF cover with the operator panel

indicating anything other than "P" or "0". The Feed

rollers do not rotate even if you open the ADF cover

with "P" or "0" displayed and perform step 2).

2) Simultaneously hold down the "Send to" and "Scan"

buttons on the operator panel.

The Feed rollers start to rotate slowly.

For details on where the "Send to" and "Scan" buttons

are located, see "1.3 Operator panel."

3) Hold a soft, dry cloth moistened with cleaning fluid

against the surface of the rotating Feed rollers so that

it lightly cleans the surface of the rollers. Take

particular care when cleaning these rollers as black

foreign matter on these rollers affects document pick

performance.

As a guideline, seven simultaneous presses of the

"Send to" and "Scan" buttons cause the Feed rollers

to rotate one full turn.

CAUTION

In step2, four Feed rollers turn at

the same time.

When cleaning the Feed roller,

be careful as your hand may

easily contacts the Feed roller.

5.2 Cleaning the ADF 63

DAILY CARE

•Sheet guide(Especially a white portion)

Clean lightly.

•Glass

Clean lightly.

HINT

When white portion of the sheet guide or

glass surface become dirty, black vertical

streaks sometimes appear in the scanned

image.

Andere Handbücher für FI-4120C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Scanner Handbücher

Fujitsu

Fujitsu FI-5530C2 Bedienungsanleitung

Fujitsu

Fujitsu FI 4220C - Document Scanner Handbuch

Fujitsu

Fujitsu FI-6140c Konfigurationshandbuch

Fujitsu

Fujitsu M3093EX Handbuch

Fujitsu

Fujitsu ScanPartner 93GX Handbuch

Fujitsu

Fujitsu fi-60F Bedienungsanleitung

Fujitsu

Fujitsu C150-E146-02EN Handbuch

Fujitsu

Fujitsu CardMinder Series Bedienungsanleitung

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Handbuch

Fujitsu

Fujitsu fi 5750C - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu M3096EX Handbuch

Fujitsu

Fujitsu ScanPartner 93GX Bedienungsanleitung

Fujitsu

Fujitsu fi-6130Z Bedienungsanleitung

Fujitsu

Fujitsu fi 5750C - Document Scanner Konfigurationshandbuch

Fujitsu

Fujitsu fi-5000N Handbuch

Fujitsu

Fujitsu Fujitsu fi-5950 Handbuch

Fujitsu

Fujitsu ScanSnap iX500 Bedienungsanleitung

Fujitsu

Fujitsu fi-5650C Konfigurationshandbuch

Fujitsu

Fujitsu ScanSnap S1100 Bedienungsanleitung

Fujitsu

Fujitsu fi-6400 Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap FI-4110EOX2 Referenzhandbuch

Fujitsu

Fujitsu ScanSnap S1100 Bedienungsanleitung

Fujitsu

Fujitsu M3096EX/GX Handbuch

Fujitsu

Fujitsu ScanSnap N1800 Handbuch

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung