Fujitsu Fi-6670 Series Bedienungsanleitung

Getting Started

Image Scanner

fi-6670/fi-6770/fi-6750S

P3PC-2242-05EN

Conventions

Symbols Used In This Manual

For notational conventions, the following symbols are used in

this manual.

Naming Conventions in This Manual

■Scanners

The scanners are indicated as follows:

The explanation in this manual bases on the following

models:

•ADF type: fi-6670

•Flatbed type: fi-6770

■Operating Systems and Software Products

The OSs and products in this manual are indicated as

follows:

This symbol alerts operators to particularly impor-

tant information. Be sure to read this information.

This symbol alerts operators to helpful advice

regarding operation.

Model Indication

fi-6670 ADF type Scanner

fi-6770/fi-6750S Flatbed type

Product Indication

Windows®2000 Professional

(Service Pack 4 or later)

Windows

2000

Windows

Windows®XP Home Edition

(Service Pack 3 or later)

Windows®XP Professional

(Service Pack 3 or later)

Windows®XP Professional x64

Edition (Service Pack 2 or later)

Windows

Windows Server®2003, Standard

Edition

Windows Server®2003, Standard

x64 Edition

Windows Server®2003 R2, Standard

Edition (Service Pack 2 or later)

Windows Server®2003 R2, Standard

x64 Edition (Service Pack 2 or later)

Windows

Server

2003

Thank you for purchasing a fi-6670 / fi-6770 / fi-6750S Color Scanner series. This Getting Started is the

startup guide that summarizes the preparatory actions needed before use. Be sure to thoroughly read this

manual before you start using the scanner.

Read the Operator’s Guide (PDF) included in the Setup DVD-ROM for information about the scanner’s

operation procedures, daily care, consumables replacement, and troubleshooting.

Microsoft, Windows, Windows Server, Windows Vista, Excel, and SharePoint are either registered trade-

marks or trademarks of Microsoft Corporation in the United States and/or other countries.

Word is a product of Microsoft Corporation in the United States.

ISIS is a registered trademark or trademark of EMC Corporation in the United States.

ABBYY™ FineReader™ Engine © ABBYY. OCR by ABBYY

ABBYY and FineReader are trademarks of ABBYY.

ScanSnap, ScanSnap Manager, and PaperStream are registered trademarks of PFU LIMITED in Japan.

Other company names and product names are the registered trademarks or trademarks of the respective

companies.

July, 2013

*1) Where there is no distinction between the different

versions of the above operating system, the general term

"Windows" is used.

Arrow Symbols in This Manual

Right-arrow symbols (D) are used to separate icons or menu

options you should select in succession.

Example: Select [Tool] D[Scan Setting].

Screen Examples in This Manual

The screen examples in this manual are subject to change

without notice in the interest of product improvement.

If the actual displayed screen differs from the screen examples

in this manual, operate by following the actual displayed

screen while referring to the user's manual of the scanner

application you are using.

The screen examples used in this manual are of the TWAIN

driver, ISIS driver, and ScandAll PRO (image scanning appli-

cation).

Safety Information

The attached "Safety Precautions" manual describes impor-

tant details for users to use this product safely and correctly.

Read the Safety Precautions thoroughly before you start using

this product.

Warning Indications Used In This

Manual

The following indications are used in this manual to obviate

any change of accident or damage to you and/or the equip-

ment.

Product Indication

Windows Vista®Home Basic

(32/64-bit) (Service Pack 1 or later)

Windows Vista®Home Premium

(32/64-bit) (Service Pack 1 or later)

Windows Vista®Business (32/64-bit)

(Service Pack 1 or later)

Windows Vista®Enterprise

(32/64-bit) (Service Pack 1 or later)

Windows Vista®Ultimate (32/64-bit)

(Service Pack 1 or later)

Windows

Vista

Windows

Windows Server®2008 Standard

(32/64-bit)

Windows Server®2008 R2 Standard

(64-bit)

Windows

Server

2008

Windows®7 Home Premium

(32/64-bit)

Windows®7 Professional (32/64-bit)

Windows®7 Enterprise (32/64-bit)

Windows®7 Ultimate (32/64-bit)

Windows

Windows Server®2012 Standard

(64-bit)

Windows

Server

2012

Windows®8 (32/64-bit)

Windows®8 Pro (32/64-bit)

Windows®8 Enterprise (32/64-bit)

Windows

WARNING

This indication alerts operators to an

operation that, if not strictly observed,

may result in severe injury or death.

CAUTION

This indication alerts operators to an

operation that, if not strictly observed,

may result in safety hazards to personnel

or damage to equipment.

1Preparation

Contents of the Scanner Package

When you unpack the scanner package, make sure that all of the following parts are included in the

package.

Make sure the scanner package contains all the parts listed in the package contents list that is included

in the package box.

If any parts are missing or defective, contact your FUJITSU scanner dealer or an authorized FUJITSU

scanner service provider.

Scanner (x1)

ADF paper chute (x1)

Stacker (x1)

AC cable (The contents may vary depending on the country and

the model purchased.)

USB cable (x1)

Setup DVD-ROM (x1)

2D Barcode for PaperStream Setup CD-ROM (x1)

[fi-6670/fi-6770]

Safety Precautions (x1)

Operator panel overlay (x5)

2Installing the Scanner

The following describes how to install the scanner.

1Place the scanner at its installation site.

The outer dimensions and the spaces required for installing the respective scanner types are as

follows:

2Unlock the Transport Lock (Flatbed type only).

Using a coin or similar, rotate the Transport Lock counterclockwise by 90 degree to unlock it.

3Adjust the position of the ADF (Flatbed type only).

1) Holding the handle, lift open the Document Cover.

2) Remove the ADF Lock Screws, and then set them to the Lock Screw Storage Holes.

(13.0)

(19.6) (13.4)

329

1179

690 (27.1)

432 (17.0)

686

500

700 342

1030 (40.5)

300 (11.8)

640 (25.1)

390 (15.3)

(27.0)

(46.4)

(27.5)

(Unit: mm/inches)

Flatbed typeADF type

Installation space

Outer dimensions

3) Gently close the Document Cover.

4) Change the position of the ADF.

The ADF can be set to any of the following three positions:

After repositioning the ADF, be sure that the ADF is firmly locked to the new position.

■

Traditional (Factory default)

■ Standard (Space-saving type and for right-handed

operators)

Slide the ADF toward the center of the scanner.

Note the following explanation in this manual is based upon

this standard type of the scanner.

■

Reversed (Space-saving type and for left-handed

operators)

Slide the ADF toward the center of the scanner, and then

rotate it counterclockwise by 180 degree.

4Attach the Stacker and the ADF Paper Chute to the scanner.

1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.

2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.

CAUTION

• Be careful not to pinch your fingers when moving the ADF.

• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.

Protruding section Hook

3Connecting the Cables

The following describes how to connect the cables between the scanner and your computer.

The type of the connector for the cable depends on the scanner model you use. Confirm the scanner

model and use the correct cable.

SCSI ID

ADF type

Flatbed type

USB cable

SCSI cable

USB or SCSI connection

fi-6670

fi-6770

fi-6750S

USB cable

SCSI cable

USB or SCSI connection

USB connection

1Make sure that the computer is turned OFF.

2Open the Cable Cover (ADF type only).

3Connect the scanner to your computer either with a USB or SCSI cable.

The following describes the requirements for connecting with the respective cables.

■USB cable

• Be sure to use the USB cable which comes as an accessory with this scanner.

• When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use

the second or later hub stages, the scanner may not operate correctly.

• If you connect the scanner with USB 2.0, it is required that the USB port and the Hub be compliant with

USB 2.0. The scanning speed slows down when you connect the scanner with USB 1.1.

■SCSI cable

• When using the scanner with a SCSI interface, the following types of SCSI cable and SCSI card must

be purchased.

• SCSI cable:

Use a SCSI cable whose connector on the computer side mates to the connector on the SCSI card

installed on your computer.

On the scanner side, use a 50-pin high-density type SCSI cable.

• SCSI card:

Find the recommended SCSI card information on the Fujitsu website (FAQ):

http://www.fujitsu.com/global/support/computing/peripheral/scanners/scsi/

• In a SCSI daisy chain formation, connect the scanner so that it is the terminated device.

• The SCSI ID initially set at the factory is [5]. If the SCSI ID of another SCSI device is set to the same ID,

change the scanner's SCSI ID to [0] through [7].

4Connect the Power cable to the Power Connector of your scanner and to the

power outlet.

5Close the Cable Cover (ADF type only).

Let the cables out from the side slots of the scanner.

• You cannot make both USB and SCSI cable connections at the same time.

• You cannot connect multiple computers to the scanner at the same time.

• Turn off the scanner and your computer first when you switch the interface cable.

Be careful not to damage any pins of the SCSI connector when connecting the scanner to

your computer.

WARNING

Be sure to use the supplied power cable. Use of other power cables may cause

electrical shock or malfunction.

Do not use the supplied power cable for other products. Doing so may cause

electrical shock or malfunction.

4Installing the Software

Bundled Software

The following software are bundled with the scanner:

■PaperStream IP (TWAIN) Driver

Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant

applications.

■PaperStream IP (ISIS) Driver

Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant applications.

■2D Barcode for PaperStream [fi-6670/fi-6770]

This option can recognize two dimensional codes.

Can be used with the PaperStream IP (TWAIN) driver, the PaperStream IP (ISIS) driver, or Paper-

Stream Capture.

For fi-6750S, the 2D Barcode for PaperStream option is sold separately.

For details about the installation, refer to readme in the 2D Barcode for PaperStream Setup CD-ROM.

■Software Operation Panel

Configure various settings such as the operation of the scanner and managing the consumables.

Installed together with the PaperStream IP (TWAIN) driver and PaperStream IP (ISIS) driver.

■Error Recovery Guide

Shows the error status and countermeasures when an error occurs. Installed together with the

PaperStream IP (TWAIN) driver and PaperStream IP (ISIS) driver.

■PaperStream Capture

An image scanning application that supports the PaperStream IP (TWAIN) driver and Paper-

Stream IP (ISIS) driver. By defining scan settings as document profiles, you can customize the

settings according to your preference.

■ScanSnap Manager for fi Series

An application that scans images with the driver settings that are used exclusively for ScanSnap

Manager for fi Series. PaperStream IP (TWAIN) driver is required to use this application. Enables

easy scanning with a single button.

■Scan to Microsoft SharePoint

An application that allows you to upload your files easily from ScanSnap Manager for fi Series to a

SharePoint site. Can be used to scan from ScanSnap Manager for fi Series.

■ABBYY FineReader for ScanSnap™

Bundled for use with ScanSnap Manager for fi Series, this application converts scanned images

into Microsoft®Office (Word/Excel®/ PowerPoint®) files. Can be used to scan from ScanSnap

Manager for fi Series.

■Manual

Includes Safety Precautions, Getting Started, and Operator's Guide.

■Scanner Central Admin Agent

Used to centralize the management of multiple scanners, by allowing you to apply firmware

updates simultaneously, monitor the operating status, and check the scanner information.

Note that required applications will differ depending on the form of operation.

For details, refer to the Scanner Central Admin User’s Guide.

■Other Software (Legacy)

Software that were bundled with older versions of scanners are also included.

• TWAIN Driver

Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant appli-

cations.

• ISIS Driver

Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant applications.

• Image Processing Software Option

A software option featuring advanced binarization of scanned images. Can be installed together with

the scanner drivers (TWAIN/ISIS).

• ScandAll PRO

ScandAll PRO is a software application for scanning images, which is in compliance with both TWAIN/

ISIS standards. By assigning scan settings into batch profiles, it enables one-touch operations to

perform scanning in ways that best suit your needs.

• ScandAll PRO ScanSnap mode Add-in (hereinafter referred to as “ScanSnap mode”)

An add-in application which provides a different set of driver settings as an alternative to using ScandAll

PRO. TWAIN driver is required to use this application. Enables easy scanning with a single button.

ScandAll PRO must be installed in order to install this software.

Installing the Bundled Software

Install the bundled software from the Setup DVD-ROM in the following procedure.

Note that there are two ways to install the bundled software: select [Installation (Recommended)] to

install all the software required to operate the scanner, or [Installation (Custom)] to select and install the

software as needed.

The following software are installed:

■PaperStream IP (TWAIN) Driver

■Software Operation Panel

■Error Recovery Guide

■PaperStream Capture

■ScanSnap Manager for fi Series

■ABBYY FineReader for ScanSnap™

■Manual

■Scanner Central Admin Agent

1Turn on the computer and log onto Windows®as a user with Administrator

privileges.

If an old version of the software is installed already, uninstall it first.

For details about the uninstallation procedures, refer to "A.5 Uninstalling the Software" in the Opera-

tor's Guide.

Installation (Recommended)

2Insert the Setup DVD-ROM into the DVD drive.

DThe [fi Series Setup] screen appears.

3Click the scanner model.

4Click the [Installation (Recommended)] button.

5Follow the instructions on the screen to proceed with the installation.

1Perform steps 1 to 3 in "Installation (Recommended)" (on page 9).

2Click the [Installation (Custom)] button.

3Select the check box for the software to install and click the [Next] button.

4Follow the instructions on the screen to proceed with the installation.

If the [fi Series Setup] screen does not appear, double-click "Setup.exe" in the Setup DVD-ROM

via Windows Explorer or [Computer].

Installation (Custom)

Andere Handbücher für fi-6670 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Scanner Handbücher

Fujitsu

Fujitsu SV600 Montageanleitung

Fujitsu

Fujitsu Fujitsu fi-5950 Handbuch

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Bedienungsanleitung

Fujitsu

Fujitsu M3099A Handbuch

Fujitsu

Fujitsu FI-5530C2 Bedienungsanleitung

Fujitsu

Fujitsu fi-6140Z Bedienungsanleitung

Fujitsu

Fujitsu fi-4750L Installationshandbuch

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Handbuch

Fujitsu

Fujitsu fi-7800 Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iX1600 Bedienungsanleitung

Fujitsu

Fujitsu fi-5220C Handbuch

Fujitsu

Fujitsu fi-5220C Bedienungsanleitung

Fujitsu

Fujitsu M3093DE Bedienungsanleitung

Fujitsu

Fujitsu FI-4120C Bedienungsanleitung

Fujitsu

Fujitsu fi-5650C Konfigurationshandbuch

Fujitsu

Fujitsu fi-6130Z Bedienungsanleitung

Fujitsu

Fujitsu Fujitsu fi-5950 Handbuch

Fujitsu

Fujitsu fi-4530C Bedienungsanleitung

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Handbuch

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Bedienungsanleitung

Fujitsu

Fujitsu S1500 - ScanSnap Deluxe Bundle Bedienungsanleitung

Fujitsu

Fujitsu ScanPartner 3092DC Bedienungsanleitung

Fujitsu

Fujitsu ScanPartner 3091DC Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap fi-5110C Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung

BenQ

BenQ Joybook 5000U series Bedienungsanleitung

Fujitsu fi-6670 Series Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken