Fujitsu S1500 - ScanSnap Deluxe Bundle Montageanleitung

P3PC-2752-02EN

Thank you for purchasing FUJITSU color image scanner ScanSnap S1500, S1500M, or S1300 (hereinaf-

ter referred to as "the ScanSnap").

This document contains the general information for safety that must be read before using this product

(which includes the ScanSnap, and all associated software and documents).

Read this document, Getting Started, and Operator's Guide thoroughly and take care to use this product

correctly. Make sure that these are kept in a safe place so that they can be referred to whenever using

this product.

August 2010

Company names and product names in this document are the trademarks or registered trademarks of the

respective companies.

Color Image Scanner ScanSnap

Safety Precautions

Use in High-Safety Applications

This product has been designed and manufactured on the assumption that it will be used in office,

personal, domestic, regular industrial, and general-purpose applications.

It has not been designed and manufactured for use in applications (simply called "high-safety

applications" from here on) that directly involve danger to life and health when a high degree of safety is

required, for example, in the control of nuclear reactions at nuclear power facilities, automatic flight

control of aircraft, air traffic control, operation control in mass-transport systems, medical equipment for

sustaining life, and missile firing control in weapons systems, and when provisionally the safety in

question is not ensured.

The user should use this product with adopting measures for ensuring safety in such high-safety

applications. PFU LIMITED assumes no liability whatsoever for damages arising from use of this product

by the user in high-safety applications, and for any claims or compensation for damages by the user or a

third party.

Warning Indications Used in This Document

The following indications are used in this document to obviate any chance of accident or damage to you

and/or this product.

For Safe Use

The following describes important warnings for using this product.

For the safe use of this product, make sure to follow the following descriptions. In the following warnings,

"power cable" may refer to the AC cable connected to the AC adapter collectively.

Warning Indication Description

This indication alerts operators to an operation that, if not strictly observed, may

result in severe injury or death.

This indication alerts operators to an operation that, if not strictly observed, may

result in safety hazards to personnel or damage to the product.

A TRIANGLE symbol indicates that special care and attention is required.

The drawing inside the triangle shows the specific caution.

A CIRCLE with a diagonal line inside shows actions which users should not

perform.

It may also have a drawing inside which shows the specific action that is not

allowed.

A white exclamation mark on black background show instructions users should

follow.

It may also include the drawing that shows the specific instruction.

Do not insert or drop any foreign objects (water, liquids, small metal objects, etc.) into the

opening sections on the ScanSnap.

If foreign objects get inside the ScanSnap, immediately turn off the ScanSnap, and disconnect

the power cable from the AC outlet or the USB bus power cable from the computer.

Then, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service

provider. Pay particular attention to this warning in households where there are small children.

If the ScanSnap is damaged for any reason, immediately disconnect the power cable from the

AC outlet or the USB bus power cable from the computer. Then, contact your FUJITSU

scanner dealer or an authorized FUJITSU scanner service provider.

WARNING

CAUTION

WARNING

In one of the following situations, immediately turn off the ScanSnap, and disconnect the

power cable from the AC outlet or the USB bus power cable from the computer. Not doing so

may cause a fire or electric shock.

zSmoke or heat coming from the ScanSnap is detected.

zStrange noise or smell is detected.

zForeign objects (water, liquids, small metal objects, etc.) get inside the ScanSnap.

zOther problems which indicate a ScanSnap failure are detected.

Then, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service

provider. Never try fixing such problems by yourself. Doing so is dangerous.

Do not take apart or modify the ScanSnap as high-voltage components inside the ScanSnap

are dangerous. PFU assumes no liability to any damage caused by taking apart the

ScanSnap, as doing so is not covered under the warranty.

For ScanSnap S1500 or ScanSnap S1500M Users

The area around the part to which this warning label is affixed can become very hot.

To avoid burns, never touch around the area indicated by this label.

Firmly insert the power cable into the AC outlet or the USB bus power cable into the computer.

Not doing so may cause a fire or the ScanSnap to malfunction.

Use the ScanSnap only at the indicated power voltage and current. Do not connect to multiple-

power strips. Improper power voltage or current might cause a fire or electric shock.

Use only the power cable or the USB bus power cable provided with the ScanSnap. Do not

use any extension cords. Not following these instructions may cause abnormal heat or a fire.

Do not use the power cable or the USB bus power cable provided with the ScanSnap for other

devices, since this might cause problems such as an equipment failure, or an electric shock.

Do not install in a damp, oily, smoky, steamy, or dusty environment. Doing so may cause a fire

or electric shock.

Do not install the ScanSnap in the following locations which are subject to high temperature,

humidity, less ventilation, or dust. If placed in an area subject to high temperature, the cover

may become overheated and deformed, causing the ScanSnap to become hot, resulting in a

fire.

Use the ScanSnap in a well-ventilated environment.

zA place near heat-radiating devices such as stoves or electric heaters, or flammable items

such as volatile inflammable materials or curtain.

zA place such as a bathroom, shower room, or swimming pool where it may easily get wet.

zA place under direct sunlight, in a car under the scorching sun, or near heating apparatus

where it may get hot.

To avoid injuries, do not place the ScanSnap in an area where small children may be able to

reach.

Before moving the ScanSnap, be sure to disconnect the power cable from the AC outlet, or the

USB bus power cable from the computer, and all other interface cables. Make sure that the

floor is free of any obstructions.

Do not move the ScanSnap while there are cables connected, doing so can damage the

cables, in turn causing fire, electric shock or injuries.

Do not touch the power cable or the USB bus power cable with wet hands. Doing so might

cause an electric shock.

When disconnecting the power cable from the AC outlet or the USB bus power cable from the

computer, make sure to hold the power plug and not the cable. Pulling the cord may damage

it, which may cause a fire or electric shock.

Do not use the power cable or the USB bus power cable if it is damaged. Also, do not insert

any cables or power plugs into loose sockets. Doing so may cause a fire or electric shock.

Be careful of the following when handling the power cable or the USB bus power cable:

zDo not moisten, modify, tie, bundle, or wind the cable.

zDo not place heavy objects on the cable, trap the cable in a doorway, drop or damage the

cable in any other way.

zDo not pull or forcibly bend or twist the cable.

zDo not place any metal near to the plug of the power cable.

If the power cable or the USB bus power cable is damaged, contact your FUJITSU scanner

dealer or an authorized FUJITSU scanner service provider.

Do not place heavy objects on the ScanSnap or perform other work on top of the ScanSnap.

Doing so might cause injuries or an equipment failure.

Do not use the ScanSnap or AC adapter while covered with a blanket, etc. Doing so may raise

the temperature inside and cause a fire.

Avoid getting a sleeve, necktie, or hair caught up in any ScanSnap mechanism during

scanning since this may cause injuries.

Do not use the ScanSnap while driving a car. Doing so may prevent you from driving carefully,

which can cause an accident.

Do not touch the heated section such as the bottom of the ScanSnap or AC adapter for a long

time. Doing so may cause a low-temperature burn on your skin.

When the ScanSnap is not going to be used for a long period of time, be sure to disconnect

the power cable from the AC outlet or the USB bus power cable from the computer. Not doing

so may cause a fire or electric shock.

Do not use any aerosol sprays or alcohol based sprays to clean the ScanSnap. Dust blown up

by strong air from the spray may enter the inside of the ScanSnap. This may cause the

ScanSnap to fail or malfunction. Sparks, caused by static electricity, generated when blowing

off dust and dirt from the outside of the ScanSnap may cause a fire.

Check the following items once a month:

zThe power cable is firmly inserted into the AC outlet, and the USB bus power cable is

inserted into the computer.

zThe power cable or the USB bus power cable is not emitting abnormal heat, or the cable is

not rusted or bent.

zDust is not accumulated on the power cable (especially the plug) or the USB bus power

cable. If so, wipe off any dust with a soft, dry cloth.

zThe power cable or the USB bus power cable does not have any cracks or scratches.

If any abnormality is detected, contact your FUJITSU scanner dealer or an authorized

FUJITSU scanner service provider.

When installing the ScanSnap on a table, make sure that the work surface is flat and stable,

and that none of the ScanSnap's parts extend over the table edge, otherwise it may fall over or

be pulled off the table and cause injuries.

Install the ScanSnap away from strong magnetic fields and other sources of electronic noise.

Protect the ScanSnap against any static electricity and choose a static-free place to install the

ScanSnap. Static electricity can cause the ScanSnap to malfunction.

If there is an electrical storm, disconnect the power cable from the AC outlet. Not doing so may

destroy the ScanSnap, which may damage your properties.

Do not supply the power from the AC outlet where the devices requiring much power such as

copying machines or paper shredders are connected.

For ScanSnap S1500 or ScanSnap S1500M Users

Do not block the ventilation ports. Blocking the ventilation ports generates heat inside of the

ScanSnap, which may result in a fire or ScanSnap failure.

Do not use the ScanSnap immediately after moving it from a cold place into a warm room.

Condensation may occur, which might lead to scanning errors. Let the ScanSnap dry for one

or two hours before you use it.

When handling documents, be careful not to cut your fingers with them.

For ScanSnap S1500 or ScanSnap S1500M Users

When handling the Carrier Sheet, be careful not to cut your fingers with it.

When carrying the ScanSnap outside while it is raining or snowing, pay special attention so

the ScanSnap does not get wet.

If the ScanSnap gets wet, wipe it or wait until it dries.

CAUTION

For ScanSnap S1500 or ScanSnap S1500M Users

Parts of the ScanSnap use magnets. Magnetic and IC cards should not come into contact with

these parts. Otherwise, the magnetic part of the card may be damaged.

For more details about the parts that use magnets, refer to the "Getting Started".

For ScanSnap S1300 Users

LED light source of this product is not exposed in normal use, and the intensity of LED light

emission does not pose any risk of eye damage. Do not disassemble, repair, or customize this

product by yourself. Direct exposure to the LED light source could cause problems with visual

acuity.

When you perform cleaning, make sure that the inside of the ScanSnap is free of any foreign

object, and be careful not to get your hand or the cloth caught on the pick spring (metal part)

as a deformed pick spring (metal part) may cause injury.

Precautions

■Liability Note

READ ALL OF THIS DOCUMENT, GETTING STARTED, AND OPERATOR'S GUIDE CAREFULLY

BEFORE USING THIS SCANNER. IF THIS SCANNER IS NOT USED CORRECTLY, UNEXPECTED

INJURY MAY BE CAUSED TO USERS OR BYSTANDERS.

Also, keep this document in a safe place so that it can be easily referred to during use of this scanner.

While all efforts have been made to ensure the accuracy of all information in this document, PFU

assumes no liability to any party for any damage caused by errors or omissions or by statements of any

kind in this document, its updates or supplements, whether such errors are omissions or statements

resulting from negligence, accidents, or any other cause. PFU further assumes no liability arising from

the application or use of any scanner or system described herein; nor any liability for incidental or con-

sequential damages arising from the use of this document. PFU disclaims all warranties regarding the

information contained herein, whether expressed, implied, or statutory.

For ScanSnap S1500 or ScanSnap S1500M Users

■Use of Mercury

To avoid unexpected injuries:

zDo not put the substance contained in the lamp in your mouth as it has mercury.

zDo not breathe the chemical liquid contained in the ScanSnap lamps.

zDo not incinerate, crush, or shred the lamps or ScanSnap parts.

For ScanSnap S1500 or ScanSnap S1500M Users

■Warning Label

The ScanSnap carries the warning label.

Do not remove the warning label from the ScanSnap. Avoid staining the label, so that it is clearly visi-

ble.

Disclaimer of Liability

■Reproducibility of the Scanned Image Data

Confirm that the image data scanned with this product meets your requirements (for example, image

reproducibility in size accuracy, fidelity, content, colors).

Make sure that there are no missing parts in the scanned image data before disposing of the original

document used for scanning.

zNote that when there are sections marked with a highlight pen, the color of the marked section may

not be recognized depending on the color and density, or may turn out in a different color tone from

the original.

Lamp(s) inside the ScanSnap contain mercury and must be recycled or disposed of

according to local, state, or federal laws.

For ScanSnap S1300 Users

■Bus Power Use Restrictions

When using a computer as the power supply for the ScanSnap:

zThe ScanSnap does not work properly if you connect it to a non-powered USB hub.

zThe ScanSnap does not work properly if you connect it to the USB port of a PC card.

zThe ScanSnap may not work properly if you connect the USB bus power cable and USB cable to

different computers or powered USB hubs.

zThe ScanSnap may not work properly if you connect another USB-powered device to any of the

USB ports of the computer.

zDepending on the USB power supply capability of the computer, other USB-powered devices con-

nected to the computer may be affected.

Regulatory Information

FCC Declaration

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

document, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit different from that to which the receiver is located.

zConsult your dealer or an experienced radio/TV technician.

FCC warning: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Canadian DOC Regulations

This digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus

set out in the Radio interference Regulations of the Canadian Department of Communications.

This Class B digital apparatus complies with Canadian ICES-003.

Le présent appareil numérique n'émet pas de parasites radioélectriques dépassant les limites

applicables aux appareils numériques de la classe B et prescrites dans le Règlement sur le brouillage

radioélectrique dictées par le Ministère des Communications du Canada.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

NOTICE The use of a shielded interface cable is required to comply with the Class B limits of Part

15 of FCC rules. The length of the power cable must be 3 meters (10 feet) or less.

Maintenance

The user must not perform repairs on the ScanSnap.

Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider to make

repairs to the ScanSnap.

Contact for Inquiries

Refer to the contact list on the last page of this document.

Notice

zCopying of the contents of this document in whole or in part and copying of the scanner application

is prohibited under the copyright law.

zThe contents of this document are subject to change without notice.

Bescheinigung des Herstellers/Importeurs

Für den Scanner wird folgendes bescheinigt:

zIn Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört

zMaschinenlärminformationsverordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB (A)

oder weniger, gemäß EN ISO 7779.

Dieses Gerät wurde nicht für die Benutzung in unmittelbarer Umgebung starker Lichtquellen (z. B.

Projektoren) konzipiert.

For ScanSnap S1300 Users

Safety Standards for LED Products

This product is classified as a Class 1 LED product, which conforms to IEC 60825-1, an international

standard for laser products, and EN 60825-1, a standard adopted by CENELEC (Comité Européen de

Normalisation Électrotechnique).

Green Product Development

PFU LIMITED has proudly produced this eco-friendly product which passes our

internal criteria, "Green Product Evaluation Standard", including green

implementation such as recycling, energy reduction, and eco-friendly parts usage.

For more details, refer to "Environment" on the Fujitsu Web site.

http://www.fujitsu.com/global/about/environment/

ENERGY STAR®

PFU Limited, a Fujitsu company, has determined that this product meets the

ENERGY STAR®guidelines for energy efficiency.

ENERGY STAR®is a registered trademark of the United States.

Class 1 LED Product

Andere Handbücher für S1500 - ScanSnap Deluxe Bundle

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Scanner Handbücher

Fujitsu

Fujitsu PA03586-B205 Handbuch

Fujitsu

Fujitsu fi-6240C Konfigurationshandbuch

Fujitsu

Fujitsu fi-5650C Konfigurationshandbuch

Fujitsu

Fujitsu fi-600F Handbuch

Fujitsu

Fujitsu S510 - ScanSnap - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu fi-6800 Konfigurationshandbuch

Fujitsu

Fujitsu ScanSnap N1800 Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iX500 Bedienungsanleitung

Fujitsu

Fujitsu Fujitsu fi-5950 Bedienungsanleitung

Fujitsu

Fujitsu S1500 - ScanSnap Deluxe Bundle Betriebsanleitung

Fujitsu

Fujitsu ScanPartner 620C Bedienungsanleitung

Fujitsu

Fujitsu Fujitsu fi-5950 Bedienungsanleitung

Fujitsu

Fujitsu FI-4120C Bedienungsanleitung

Fujitsu

Fujitsu S1500M - ScanSnap - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Handbuch

Fujitsu

Fujitsu C150-E049-02EN Installations- und Betriebshandbuch

Fujitsu

Fujitsu ScanSnap Organizer Bedienungsanleitung

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu fi-7160 Handbuch

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Fujitsu

Fujitsu fi-6000N Konfigurationshandbuch

Fujitsu

Fujitsu FI-4990C Bedienungsanleitung

Fujitsu

Fujitsu fi-60F Bedienungsanleitung

Fujitsu

Fujitsu fi-6110 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung