Fujitsu BS2000/OSD Bedienungsanleitung

Edition March 2013

English

HNC

High-Speed Network Connect

BS2000/OSD Server

User Guide

Valid for:

HNC Software V2.1 (HNC-V 91854, HNC-VI 91855)

Comments…Suggestions…Corrections…

The User Documentation Department would like to know your

opinion on this manual. Your feedback helps us to optimize our

documentation to suit your individual needs.

Feel free to send us your comments by e-mail to:

manuals@ts.fujitsu.com

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system which

complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

This manual is printed

on paper treated with

chlorine-free bleach.

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

Linux is a registered trademark of Linus Torvalds.

The Linux-based operating systems X2000 and MARS which are installed on the Server Unit and MARS contain

Open Source Software. You will find the licenses for this software in the ThirdPartyLicenseReadme.txt file on the

installation DVD.

U41655-J-Z125-5-74

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010 20. March 2014 Stand 13:14.05 Pfad: P:\FTS-BS\BS2-GA\OSD-V90\9999999_Einleitungen\HNC\prod_e\hnc.ivz

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Objectives and target groups of the manual . . . . . . . . . . . . . . . . . . . . . 7

1.2 Summary of the contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3 Changes since the last edition of the manual . . . . . . . . . . . . . . . . . . . . . 8

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.5 Open Source Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Basic mode of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.1.1 LAN connection of the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.1.2 BS2000 connections and emulated BS2000 devices . . . . . . . . . . . . . . . . . 15

2.2 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.3 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3 Operating the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1 HNC Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1.1 Calling the HNC Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.1.2 Logging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.1.3 Logging out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1.4 Session management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1.5 Interface of the HNC Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.1.5.1 Window types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.1.5.2 Main window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.1.5.3 Dialog boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.1.6 Calling an object or function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.1.7 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Contents

U41655-J-Z125-5-74

3.1.8 Filtering a table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.1.9 Sorting a table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.1.10 Calling the online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.1.11 Error handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3.2 Access to the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.2.1 Opening a terminal window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.2.2 Closing the terminal window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.2.3 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.2.3.1 auditLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.2.3.2 cli_info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.2.3.3 hnc_state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.2.3.4 init . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4 BS2000 connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5 Managing the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.1 Querying information about the HNC . . . . . . . . . . . . . . . . . . . . . . . . 37

5.2 HNC configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.2.1 Managing the host name, default gateway, LAN interfaces, and DNS configuration . . 39

5.2.2 Configuring the system time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

5.2.3 Configuring SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

5.2.4 Managing links to external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.3 Managing accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5.3.1 Managing local accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5.3.2 Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.3.3 Configuring access to an LDAP server . . . . . . . . . . . . . . . . . . . . . . . . . 46

5.3.4 Managing LDAP accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5.4 Managing backups (CSR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

5.5 Powering the HNC on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Contents

U41655-J-Z125-5-74

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010 20. March 2014 Stand 13:14.05 Pfad: P:\FTS-BS\BS2-GA\OSD-V90\9999999_Einleitungen\HNC\prod_e\hnc.ivz

6 Diagnostics and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6.1 Maintenance concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6.1.1 Remote service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6.1.2 Tasks of Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

6.1.3 Tasks of the customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

6.2 Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

6.2.1 Tasks and responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

6.2.2 Obtaining updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

6.2.3 Managing updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

6.2.4 Actions for updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

6.3 Assisting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

6.4 Diagnostic data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

6.5 System log (audit log) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Contents

U41655-J-Z125-5-74

U41655-J-Z125-5-74 7

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010 20. März 2014 Stand 13:08.12 Pfad: P:\FTS-BS\BS2-GA\OSD-V90\9999999_Einleitungen\HNC\prod_e\hnc.k01

1 Preface

This manual describes the architecture and concept of the High-speed Network Connect

(abbreviated to: HNC). The HNC connects S servers to the LAN. The HNC offers a Web

interface, the HNC Manager, for its operation and management.

The manual describes the products HNC-V 91854 and HNC-VI 91855.

For the sake of simplicity, these are referred to as HNC in this manual.

1.1 Objectives and target groups of the manual

This manual is intended for systems support and the network administrator.

It is assumed readers have a knowledge of BS2000 system operation, BS2000 systems

support, and BS2000 administration.

1.2 Summary of the contents

The documentation for the HNC with the software status V2.1 consists of this manual, the

Security Manual, and the online help.

●The manual provides an overview of the architecture and concepts of the HNC and

presents its functions.

●The Security Manual [6], which also applies for the SQ server and the SKP, describes

aspects which are relevant to security for the HNC.

●The online help describes all the functions of the HNC Manager. You open the online

help in the HNC Manager, see also Calling the online help.

The manual is structured as follows:

The chapter “Architecture” provides a schematic description of the HNC’s architecture and

hardware and the connections to the S server.

The chapter “Operating the HNC” explains the structure of the Web interface and how the

HNC is accessed via the CLI (Command Line Interface).

Changes since the last edition of the manual Preface

8 U41655-J-Z125-5-74

The chapter “BS2000 connections” describes the main function of the HNC, which is to

monitor BS2000 connections and, when required, to restart them.

The chapter “Managing the HNC” describes how you manage the HNC using the functions

of the HNC Management in the HNC Manager.

The chapter “Diagnostics and maintenance” describes how you perform maintenance for

the HNC and how you proceed when a fault occurs.

These chapters are followed by the chapter on related publications and an index.

Further documentation

The manuals “System Installation” [1] and “Introductory Guide to Systems Support” [2] are

recommended for obtaining a basic understanding of BS2000/OSD.

The ”VM2000” manual [3] is recommended for obtaining a basic understanding of VM2000.

The “openNet Server BCAM” manual [4] is recommended to provide further information on

the data communication system BCAM.

The BS2000/OSD commands referred to in this manual are described in the “Commands”

manual [5], and the VM2000 commands in the “VM2000” manual [3].

Operation of the S servers is described in the relevant “Business Server Sxxx” Operating

Manuals.

Operation of the PRIMERGY server of the TX300/RX350 series which is used as the

hardware basis for the HNC is described in the relevant Operating Manual.

1.3 Changes since the last edition of the manual

This manual has been completely revised to describe the new functions of the HNC.

Preface Notational conventions

U41655-J-Z125-5-74 9

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010 20. März 2014 Stand 13:08.12 Pfad: P:\FTS-BS\BS2-GA\OSD-V90\9999999_Einleitungen\HNC\prod_e\hnc.k01

1.4 Notational conventions

The following notational conventions are used in this manual:

The following abbreviations are used in this manual:

●S server for the business servers of the S series (/390 architecture)

●BS2000 for the BS2000/OSD operating system in compound nouns,

e.g. BS2000 system.

In the text, references to other manuals are made in abbreviated form. The full title of each

publication is referenced by a number in square brackets and can be found in the “Related

publications” under this number.

1.5 Open Source Software

The Linux-based base system of the HNC contains Open Source Software. The licenses

for this are contained in the ThirdPartyLicenseReadme.txt file on the relevant installation

DVD.

IIndicates important information and tips.

VIndicates a warning of data loss.

ÊIndicates the action which you must perform.

italics Indicates texts from the Web interface.

monospaced Indicates system inputs and outputs.

monospaced

semibold

Indicates statements which are entered via the keyboard.

UPPERCASE

LETTERS

Indicates BS2000 commands.

<abc> Indicates variables which are replaced by values.

[Key symbols] Keys are displayed as they appear on the keyboard. When uppercase

letters need to be entered, the Shift key is specified, e.g. [SHIFT] - [A]

for A. If two keys need to be pressed at the same time, this is indicated

by a hyphen between the key symbols.

Table 1: Notational conventions

Open Source Software Preface

10 U41655-J-Z125-5-74

Andere Handbücher für BS2000/OSD

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu 200/200R Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2520 M5 Bedienungsanleitung

Fujitsu

Fujitsu FW-S Series SERVIS Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S2 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance... Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX400 M1 Benutzerhandbuch

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY SX940 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 400 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Installationsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung