Fujitsu Primergy RX100 S4 Betriebsanleitung

PRIMERGY

PRIMERGY RX100 S4

Server

Service Supplement

Susanne Däschlein

Fujitsu Siemens Computers GmbH München

81730 München

e-mail: email: [email protected]

Tel.: (089) 61001155

Fax: (++49) 700 / 372 00000

RX100 S4

Sprachen: En

Edition April 2007

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX100 S4 Service Supplement

usc

onen

(OECB

ums

erv

ces

s©cogn

tas

2002

2004

11. Oktober 2006 Stand 08:43.59 Pfad: L:\RX100S4\rx100s4-ss-bearbSusi\rx100s4-ss-en.pdf\rx100s4-ss-en.ivz

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.2 Replacing the LED board . . . . . . . . . . . . . . . . . . . 18

4.3 Replacing the power supply unit . . . . . . . . . . . . . . . 19

4.4 Replacing the system fans . . . . . . . . . . . . . . . . . . 21

4.5 Replacing the SAS/SATA backplane . . . . . . . . . . . . . 22

4.6 Replacing the riser card . . . . . . . . . . . . . . . . . . . . 24

4.7 Replacing the processor . . . . . . . . . . . . . . . . . . . . 25

4.8 Replacing the system board . . . . . . . . . . . . . . . . . . 29

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1.1 LED board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1.2 SATA backplane (only hot-plug variant) . . . . . . . . . . . . . 34

5.1.3 Riser card 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.1.4 Riser card 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

RX100 S4 Service Supplement 5

1Introduction

The PRIMERGY RX100 S4 server is an Intel-based server for small and

medium-sized networks. The compact server casing (only one height unit) as

well as its scalability and security features make the PRIMERGY RX100 S4 the

perfect choice for operational areas data centers, Internet- and application-

hosting.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Siemens can order a Service DVD PRIMERGY. On

the DVD the following manuals are available in pdf format:

– The “Safety notes and other important information” manual

– The Operating Manual for PRIMERGY RX100 S4

– The Technical Manual for the system board D2532

– The Options Guide for PRIMERGY RX100 S4

– The Service Supplement PRIMERGY RX100 S4

– The “BIOS Setup” manual

6 Service Supplement RX100 S4

Overview of the documentation Introduction

Information/procedure Manual

Detailed safety notes Safety

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal of all hot-plug components:

– hot-plug hard disk drives

Information about the system board:

– Features of the system board

– Board layout

– Jumper settings

– Replacing the battery

Technical Manual

Extensions and upgrades:

IFor some components only the installation

routine is described in the Options Guide.

Removing this components proceed in

reverse order.

– Extending/replacing the main memory

– Installing an accessible drive

– Installing a second non-hot-plug SATA hard disk

– Installing controller in the PCI slots

– Upgrading to hot-plug variant

Options Guide

Cabling

Table 1: Overview of the documentation RX100 S4

RX100 S4 Service Supplement 7

Introduction Notational conventions

1.2 Notational conventions

The following notational conventions are used in this manual:

Replacement routines:

– Replacing the LED board

– Replacing the power supply unit

– Replacing the system fans

– Replacing the SAS/SATA backplane

– Replacing the riser card

– Replacing the processor

– Replacing the system board

Service Supplement

Board layout

BIOS setup BIOS Setup

Text in italics indicates commands, menu items or software programs.

„Quotation marks“ indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 2: Notational conventions

Information/procedure Manual

Table 1: Overview of the documentation RX100 S4

RX100 S4 Service Supplement 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

service personnel.

ÊFirst of all please familiarize yourself with the safety instructions in the

section chapter “Safety notes” on page 11 et seqq. .

ÊEnsure that all required manuals (see Service DVD) are available, printing

out the PDF files if necessary. You will definitely need the Operating Manual

for the server, the Options Guide for the server and the Technical Manual for

the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacement routines” on

page 17 et seqq. .

ÊReplace the defective component as described in the relevant chapter.

ÊClose the server.1

ÊConnect the cables. 1

ÊConnect the server to the power outlet.1

ÊStart the operating system.1

ÊIf necessary, configure the server as required.1

1This procedures are described in the Operating Manual.

Andere Handbücher für Primergy RX100 S4

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX100 S2 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance... Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 Bedienungsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S550 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5140 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Leitfaden

Fujitsu

Fujitsu M10 Series Technisches Handbuch

Fujitsu

Fujitsu Primergy BX620 S2 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Leitfaden

Fujitsu

Fujitsu PRIMERGY BX922 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5140 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S9010 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Stücklistenhandbuch

Fujitsu

Fujitsu PRIMERGY RX2540 M6 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2400E3 Bedienungs- und Wartungsanleitung

Fujitsu

Fujitsu Primergy ECONEL 100 S2 Kurzanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung