Fujitsu PRIMERGY TX300 Bedienungsanleitung

PRIMERGY

PRIMERGY TX300

Server System

Operating Manual

Xenia Fierley

FujitsuSiemens Computers GmbH München

81730 München

e-mail: email: [email protected]

Tel.: (089) 61001157

Fax: 0 700 / 372 00000

A26361-K881-Z102-4-7619

Sprachen: De

Edition October 2003

This manual is printed on

paper treated with

chlorine-free bleach.

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

Introduction

Insta ation Steps Overview

Important Notes

Hardware Insta ation

Preparation for Use and Operation

Property and Data Protection

Troub eshooting and Tips

Hot-p ug/hot-swap Components

Expansions and Conversions

Abbreviations, Reference Section and Index

A26361-K881-Z102-4-7619

Contents

1Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Overview of the Documentation . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Notational Conventions . . . . . . . . . . . . . . . . . . . . . . 8

1.4 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 Installation Steps: Overview . . . . . . . . . . . . . . . . . . 11

3 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . 13

3.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.2 CE Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . . 19

3.4 Transporting the Server . . . . . . . . . . . . . . . . . . . . . 20

3.5 Notes on Installing into the Rack . . . . . . . . . . . . . . . . 21

3.6 Environment Protection . . . . . . . . . . . . . . . . . . . . . 22

4 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . 25

4.1 Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . 26

4.2 Unpacking the Server . . . . . . . . . . . . . . . . . . . . . . 26

4.3 Setting Up the Floorstand Model . . . . . . . . . . . . . . . . 27

4.4 Installing/Removing the Rack Model into the Rack . . . . . . . 29

4.4.1 Mounting into the PRIMECENTER Rack . . . . . . . . . . . . 32

4.4.2 Mounting into the DataCenter Rack . . . . . . . . . . . . . . . 36

4.4.3 Mounting into the Classic Rack . . . . . . . . . . . . . . . . . 39

4.4.4 Mounting into 3rd-Party Racks . . . . . . . . . . . . . . . . . . 44

4.4.5 Installing the Server . . . . . . . . . . . . . . . . . . . . . . . 46

4.5 Connecting Devices to Server . . . . . . . . . . . . . . . . . . 49

4.6 Connecting the Server to the Line Voltage . . . . . . . . . . . 51

4.7 Instructions on Connecting and Disconnecting Cables . . . . . 52

5 Preparation for Use and Operation . . . . . . . . . . . . . . 53

5.1 Locking/Unlocking the Floorstand Model . . . . . . . . . . . . 53

5.2 Operating and Indicator Elements . . . . . . . . . . . . . . . . 55

5.2.1 The Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

5.2.2 The Rear Side . . . . . . . . . . . . . . . . . . . . . . . . . . 60

5.3 Switching the Server ON and OFF . . . . . . . . . . . . . . . 63

5.4 Starting up Hot-Plug PCI Slots . . . . . . . . . . . . . . . . . 65

5.5 Configuring the Server . . . . . . . . . . . . . . . . . . . . . . 66

5.5.1 Configuration with ServerStart . . . . . . . . . . . . . . . . . . 66

5.5.2 Configuration without ServerStart . . . . . . . . . . . . . . . . 67

5.6 Cleaning the Server . . . . . . . . . . . . . . . . . . . . . . . 68

A26361-K881-Z102-4-7619

Contents

6 Property and Data Protection . . . . . . . . . . . . . . . . . . 69

6.1 BIOS Setup Security Functions . . . . . . . . . . . . . . . . . . 69

7 Troubleshooting and Tips . . . . . . . . . . . . . . . . . . . . 71

7.1 Power-On Indicator Remains Dark . . . . . . . . . . . . . . . . 71

7.2 The Server switches itself OFF . . . . . . . . . . . . . . . . . . 72

7.3 The Monitor Remains Dark . . . . . . . . . . . . . . . . . . . . 72

7.4 Flickering Stripes Across the Monitor . . . . . . . . . . . . . . 73

7.5 No Monitor Display or the Display Drifts . . . . . . . . . . . . . 73

7.6 No Mouse Pointer Displayed on the Monitor . . . . . . . . . . . 73

7.7 The Floppy Disk Cannot be Read or Written . . . . . . . . . . . 74

7.8 Incorrect Time and/or Date . . . . . . . . . . . . . . . . . . . . 74

7.9 System Fails to Boot . . . . . . . . . . . . . . . . . . . . . . . 74

7.10 Drives Are Reported as „Dead“ . . . . . . . . . . . . . . . . . . 75

7.11 Added Drive Reported Defective . . . . . . . . . . . . . . . . . 75

7.12 Hot-Plug PCI Error Indicator Lighting . . . . . . . . . . . . . . . 76

7.13 Hot-Plug PCI Power Indicator not Lighting

after Replacing the Board . . . . . . . . . . . . . . . . . . . . 76

7.14 Error Messages on the Monitor . . . . . . . . . . . . . . . . . . 77

8 Hot-plug/hot-swap Components . . . . . . . . . . . . . . . . 79

8.1 Hot-swap Power Supply Units . . . . . . . . . . . . . . . . . . 79

8.1.1 Adding a hot-swap Power Supply Unit . . . . . . . . . . . . . . 79

8.1.2 Replacing a Hot-swap Power Supply Unit . . . . . . . . . . . . 80

8.2 Hot-swap Hard Disk Drives . . . . . . . . . . . . . . . . . . . . 81

8.2.1 Handling Hard Disk Drives/HDD Modules . . . . . . . . . . . . 81

8.2.2 Installing/Removing Dummy Module . . . . . . . . . . . . . . . 82

8.2.3 Installing/Removing HDD Module . . . . . . . . . . . . . . . . . 83

8.2.4 Hot-swap for HDD Modules . . . . . . . . . . . . . . . . . . . . 87

8.3 Installing/Removing a hot-swap Magnetic Tape Drive . . . . . . 88

8.4 Replacing a Hot-swap System Fan . . . . . . . . . . . . . . . . 90

8.5 Replacing hot-plug PCI Boards . . . . . . . . . . . . . . . . . . 94

8.6 Opening/Closing the Housing . . . . . . . . . . . . . . . . . . . 97

9 Expansions and Conversions . . . . . . . . . . . . . . . . . 99

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

A26361-K881-Z102-4-7619 1

1 Introduction

The PRIMERGY TX300 server is an Intel-based server for mid-size networks

and large companies. The server is suitable for use as a file server and also as

an application, information or Internet server. It is available as a floorstand or

rack model. The floorstand model can be converted to a rack model using an

optional conversion kit.

The PRIMERGY TX300 server offers a high level of reliability and availability

through highly developed hardware and software components. These include

hot-swap hard disk drive modules, redundant system fans and power supply

units, and hot-plug PCI slots, the ServerView server management software,

„Prefailure Detection and Analysing“ (PDA) and „Automatic Server Reconfigu-

ration and Restart“ (ASR&R).

The term hot-swap refers to the online replacement of a component (e.g. a

failed hard disk drive, which is configured as a member of a disk array (RAID)).

The term hot-plug refers to the replacement of components while the power is

switched on. In the special case of hot-plug PCI boards it is ensured that the

corresponding PCI slot is powered off before removing the board.

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

intrusion detection and the lockable drive cover on the floorstand model and/or

the lockable rack door.

The rack model occupies 4 height units (HU) in the rack.

1.1 Overview of the Documentation

IPRIMERGY manuals are available in PDF format on the

ServerBooks CD. The ServerBooks CD is part of the ServerStart Bundle

delivered with each server system.

The PDF files for the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available in the Internet can be found via the URL: http://manuals.fujitsu-

siemens.com (click intel based server/PRIMERGY ServerBooks).

2 A26361-K881-Z102-4-7619

Overview of the Documentation Introduction

Concept and Target Group of this Manual

This operating manual describes how to install, how to operate and how to

expand your server.

This operating manual is intended for those responsible for installing the

hardware and operating the system. The manual contains all the information

required for mounting and operating your PRIMERGY TX300.

To understand the different expansion options, you need a knowledge of

hardware and data transmission, as well as basic knowledge of the operating

system used.

Additional server documentation

To the PRIMERGY TX300 documentation set belong the following additional

manuals:

– “Safety and Ergonomics” manual (print version delivered together with the

system, PDF file available on the ServerBooks CD)

– “Warranty” manual (print version delivered together with the system, PDF file

available on the ServerBooks CD)

– Technical Manual for the system board D1409 (PDF file available on the

ServerBooks CD)

– BIOS Setup manual (PDF file available on the ServerBooks CD)

– “ServerStart Bundle“ includes the ServerStart CD, the ServerBooks CD and

the print version of the manual „ServerStart Bundle“. The PDF file of the

manual is also available on the ServerBooks CD.

– “Adaptec HostRAID User’s Guide“ (PDF file available on the ServerBooks CD)

IIf you need a backup of the ServerBooks-CD send the details of your

server via email address: [email protected].

Further sources of information

– technical manual for the rack

– manual for the monitor

– server management manual ServerView

– manual for the Remote Test and Diagnostic System RemoteView

– in the documentation for the boards and drives

– operating system documentation

– information files of your operating system

(see also “Related Publications” on page 107).

A26361-K881-Z102-4-7619 3

Introduction Features

1.2 Features

System board

The features of the system board (D1409) are described in the technical manual

for the system board in relation to the hardware and in the BIOS setup manual

for the firmware (see “Related Publications” on page 107).

Hot-plug PCI slots

In addition to standard PCI slots, the server also comprises two hot-plug PCI

slots that allow boards to be installed and removed online assuming the

operating system supports this functionality (for further information see section

“Replacing hot-plug PCI Boards” on page 94).

Hard disk drives

The server has a drive cage that can accommodate up to six ULTRA 320-SCSI

hard disk drive modules. Each hard disk drive module (HDD module) can accom-

modate a SCSI hard disk drive with an SCA (Single Connector Attachment)

interface and a maximum height of 1 inch. The module is connected to the SCSI

backplane without cables via the SCA interface. This allows hard disk drive

modules to be simply plugged in or pulled out (for further details see section “Hot-

swap Hard Disk Drives” on page 81).

The hard disk drive system is designed for Ultra3 SCSI and can be configured

as a dual-channel system with three hard disk drives each or as a single-

channel system with six hard disk drives. The hard disk drives can be controlled

by the onboard controller or by a RAID controller.

A HDD extension box can be installed optionally (with a maximum of three HDD

modules). The hard disk drives in the extension box can likewise be controlled

by the onboard controller or by a RAID controller.

If the server has a RAID controller and a corresponding RAID configuration,

defective HDD modules can also be exchanged online (hot-swap).

An external SCSI interface is also offered optionally to allow external storage

subsystems to be connected. You find further information in the configurator

(see “Related Publications” on page 107).

4 A26361-K881-Z102-4-7619

Features Introduction

SCSI controller with HostRAID functionality

For operating internal hard disk drives the 2-channel Ultra320 SCSI controller with

HostRAID functionality is available. In addition to the SCSI functions HostRAID

offers RAID functionality for the internal disk configuration (HostRAID: level 0, 1, 10).

ITo configure HostRAID the controller has its own RAID-Select Utility. For

further information see “Adaptec HostRAID User’s Guide“ on the Server-

Books CD (choose Controllers from the menu).

Zero Channel RAID (ZCR) controller (option)

Optionally a ZCR controller (PCI card) can be installed. In addition to RAID

levels 0, 1, 10 ZCR controller offers the possibility to configure also RAID-5 or

RAID-50. ZCR controller utilizes both channels of the onboard

Ultra320 SCSI

controller using a special integrated logic.

Accessible drives

Various mounting locations are available:

– Three 5.25 inch half-height (1.6 inch) locations for accessible drives (CD-

ROM, DVD-ROM, CD burner or magnetic tape drive) or a LocalView module.

Alternatively, two of these locations can be used to install a 3.2 inch high

accessible drive (magnetic tape drive) or HDD extension box.

– A flexy bay (slot) for a 3.5 inch slimline floppy disk drive (1.44 MB) and a

slimline DVD-ROM drive.

The accessible drives integrated in the 5.25 inch mounting locations cannot be

replaced online.

A hot-swap tape drive can be installed optionally in the drive cage or in the HDD

extension box (see also the configurator under “Related Publications” on

page 107). Two mounting locations are occupied as a result in the drive cage or

in the HDD extension box, which are then no longer available for HDD modules.

This magnetic tape drive can be replaced online.

Power supply

In its basic configuration, the server has a hot-swap wide-range power supply

unit that adjusts automatically to any power voltage in the range from 100 V to

240 V. An additional power supply unit can be installed optionally in order to

ensure redundancy of the power supply. If one power supply unit fails, the

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 300 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M12 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX120 S1 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT160 Bedienungsanleitung

Fujitsu

Fujitsu teamserver M851i Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M5000 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Kurzanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 870 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung