Fujitsu ETERNUS LT160 Bedienungsanleitung

Tape Library

User's Guide

C144-E072-01EN

FOR SAFE OPERATION

This manual contains important information regarding the use and handling of this

product. Read this manual thoroughly. Pay special attention to the section "FOR SAFE

OPERATION" Use the product according to the instructions and information available in

this manual. Keep this manual handy for further reference.

Fujitsu makes every effort to prevent users and bystanders from being injured or damage

to their property. Use the product according to this manual.

ABOUT THIS PRODUCT

This product is designed and manufactured for use in standard applications such as office

work, personal devices and household appliances. This product is not intended for

special uses (atomic controls, aeronautic or space systems, mass transport controls,

medical devices for life support, or weapons firing controls) where particularly high

reliability requirements exist, where the pertinent levels of safety are not guaranteed, or

where a failure or operational error could threaten a life or cause a physical injury

(hereafter referred to as "mission-critical" use). Customers considering the use of these

products for mission-critical applications must have safety-assurance measures in place

beforehand. Moreover, they are requested to consult our sales representative before

embarking on such specialized use.

TRADEMARKS ACKNOWLEDGEMENTS

- LTO, Liner Tape Open and Ultrium are registered trademarks of Hewlett-Packard

Company, IBM Corporation and Seagate Technology.

- Microsoft, Windows, MS, and MS-DOS are registered trademarks of Microsoft

Corporation in the United States or certain other countries.

- Solaris is a trademark of Sun Microsystems, Inc.

- Java and all other trademarks and logos related Java are registered trademarks of Sun

Microsystems, Inc in the United States or certain other countries.

- Netscape is a trademark of Netscape Communications Corporation.

- VERITAS is a registered trademark of VERITAS Software Corporation in the

United States or certain other countries.

- Logos of VERITAS and VERITAS NetBackup are registered trademarks of

VERITAS Software Corporation in the United States or certain other countries.

- ARCserve and BrightStor are trademarks of Computer Associates International in the

United States or certain other countries.

- All other corporation names and product names mentioned herein are the trademarks

or registered trademarks of their respective owners.

RADIO FREQUENCY INTERFERENCE STATEMENT

The following notice is for EU users only.

WARNING: This is a product which meets Class A of EN55022. In a domestic

environment this product may cause radio interference in which case the user may be

required to take adequate measures.

C144-E072-01EN

The following notice is for USA users only.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Laser Standard

The Fibre Channel printed circuit board contains a laser system (GBIC or GLM module).

Laser systems are classified as Class I Laser Equipment by the radiation standards of the

Department of Health and Human Services (DHHS) in accordance with Radiation

Control for Health and Safety Act of 1968 and also based on the safety requirements for

laser products in EN60825-1 (+A11). The certificate of conformance is affixed to the

module.

RELATED STANDARDS

The product specifications and functions listed in this manual conform to the following

standards:

Standard (document)

code Name Established by:

ANSI X3.131-1986 American National Standard for Information

Systeme-Small Computer System Interface (SCSI) American National

Standards Institute (ANSI)

ANSI X3.131-1994 American National Standard for Information

Systeme-Small Computer System Interface-2 (SCSI) American National

Standards Institute (ANSI)

ISO/IEC 10090 90mm Optical Disk Cartridges, rewritable and read

only, for data interchange. ISO/IEC (*1)

ISO/IEC 13963 Data Interchange on 90mm Optical Disk Cartridges

Capacity:230 megabytes per cartridge. ISO/IEC (*1)

ISO/IEC 15041 Data Interchange on 90mm Optical Disk Cartridges

Capacity:640 megabytes per cartridge. ISO/IEC JTC1 (*1)

Cherry Book GIGAMO 1.3GB 90mm Magneto-Optical Disk

System. FUJITSU LIMITED

SONY CORPORATION

*1 ISO = International Organization for Standardization

IEC = International Electrical for Commission

JTC1 = Joint Technical Committee 1

The contents of this manual shall not be disclosed in any way or reported in any media

without the express written permission of Fujitsu Limited.

C144-E072-01EN

Revision History

(1/1)

Edition Date Revised location (type) (*1) Revision

01 October 15, 2002 - -

*1 Items in the "Revised location" column refer to the latest edition unless the item is

marked with an asterisk. An asterisk indicates an item in an older edition.

C144-E072-01EN i

Preface

This manual describes the LT160 magnetic tape library.

This manual first provides an overview of the tape library and then detailed information

about the tape library. The detailed information includes specifications, installation

requirements and procedures for incorporating the tape library into a system, and

information about how to clean the tape library.

The manual is intended for users who have a basic knowledge of magnetic tape libraries

and how they are used in computer systems.

The organization of manuals related to the LT160 tape library and the scope of this

manual are indicated in the Manual Set section later. Refer to related manuals as

necessary.

The organization and contents of this manual are explained below. This information is

followed by important information related to handling of the LT160.

Organization of this manual

This manual has seven chapters, appendixes, a glossary, and a list of acronyms and

abbreviations.

Chapter 1 Overview

This chapter explains the components and functions of the library.

Chapter 2 Introducing and Preparing the Library

This chapter explains how to install, connect, and set up the library, install the host, turn

power on and off, and insert and eject cartridges.

Chapter 3 Library Operation

This chapter explains how to insert or eject a cartridge and how to clean a drive.

Chapter 4 Operator Panel Operation

This chapter explains the screen configuration of the operator panel, the menu hierarchy,

referencing of library/drive information, setup of library/drive information, and library

procedures, such as opening of the magazine door.

Chapter 5 Remote Panel Operation

This chapter explains the remote panel login method, menu hierarchy, referencing of the

library/drive information, and setup of library/drive information.

Chapter 6 Troubleshooting

This chapter provides an overview of maintenance work, explains types of errors and

their solutions, and provides troubleshooting information for ordinary problems.

Preface

ii C144-E072-01EN

Chapter 7 Cartridge Media and Bar Code Label Specifications

This chapter provides information on Ultrium cartridges and cleaning cartridges, handling

of cartridges, bar code label specifications, and maintenance and the service life of

cartridges.

Appendix A Model Configurations

This appendix provides a the diagram of the configuration of each library.

Appendix B Technical Specifications

This appendix provides ambient environment, library, physical, and Fibre Channel cable

specifications.

Conventions

In this manual, a button or menu that is referred to is indicated as, for example, [OK].

Preface

C144-E072-01EN iii

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert

message consists of an alert signal and alert statements. The alert signal consists of an

alert symbol and a signal word or just a signal word.

The following are the alert signals and their meanings:

CAUTION This indicates a hazardous situation could result in minor or

moderate personal injury if the user does not perform the

procedure correctly. This alert signal also indicates that

damages to the product or other property may occur if the user

does not perform the procedure correctly.

IMPORTANT This indicates information that could help the user use the

product more efficiently.

In the text, the alert signal is centered, followed below by the indented message.

A wider line space precedes and follows the alert message to show where the alert

message begins and ends. The following is an example:

(Example)

CAUTION

Injury: Never move your hands away from the drive module until it

is placed in a safe place. Otherwise, the drive module may drop,

causing injury if you move your hands away from it after pulling it

out beyond this stopper.

The main alert messages in the text are also listed in the "Important Alert Items."

Notice

- If any information in this manual is unclear or incorrect, please complete the

comment form at the back of this manual and give it to a Fujitsu systems engineer or

salesperson.

- The contents of this manual may be revised without prior notice.

Andere Handbücher für ETERNUS LT160

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu Primergy N800 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1310 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 PG-LNB101 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S3 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5140 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Montageanleitung

Fujitsu

Fujitsu PRIMERGY Bedienungsanleitung

Fujitsu

Fujitsu SE700 Bedienungsanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Betriebsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S4 Technisches Handbuch

Fujitsu

Fujitsu BS2000 SE320 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX400 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2550 M4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung