Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

CA92344-0536-01

FUJITSU Server

PRIMEQUEST

2000 Series

Installation Manual

Preface

CA92344-0536-01

Preface

This manual describes the functions and this manual describes how to set up this product, including the steps for

installation of the PRIMEQUEST 2000 series server, initialization, and software installation. The manual is intended for

system administrators.

For details on the regulatory compliance statements and safety precautions, see the PRIMEQUEST 2000 Series Safety

and Regulatory Information (CA92344-0523).

Organization of this manual

This manual is organized as follows.

CHAPTER 1 Installation Overview

Chapter 1 describes the workflow up to actual operation of the PRIMEQUEST 2000 series server

CHAPTER 2 Preparing for Main Unit Installation

Chapter 2 describes the preparation before main unit installation. This preparation includes work up to power

cable connection.

CHAPTER 3Work before Operating System Installation

Chapter 3 describes the work that must be done before you install an operating system on the PRIMEQUEST 2000 series

server. The chapter also describes settings for actual operation and various setup works.

CHAPTER 4 Installation of Operating System and bundled software

Chapter 4 describes how to install the operating system and bundled software.

Chapter 5 describes how to make various necessary settings after operating system.

CHAPTER 6Work after installation

Chapter 6 describes the work performed after PRIMEQUEST 2000 series installation. This work includes configuring NTP

and security.

CHAPTER 7Power ON and OFF of the partition

Chapter 7 describes partition power control.

Appendix A List of setting items

Appendix A provides links to Appendix A List of Settings in the PRIMEQUEST2000 Series Tool Reference (CA92344-

0539)

Appendix B About software

Appendix B provides a link to 3.3 Bundled Software in the PRIMEQUEST 2000 Series General Description (CA92344-

0534).

Appendix C Configuring the SAN boot environment

Appendix C is alink to the PRIMEQUEST 2000 Series SAN Boot Environment Configuration Manual (C122-E206EN).

Appendix D Notes on VMware installation

Appendix D describes the procedure for installing an internal hard disk in a RAID environment in VMware vSphere and

provides notes on installation

Appendix E Setting up the NTP Server (Windows)

Appendix E describes how to specify and set of an NTP server for a specific Windows operating system

Preface

CA92344-0536-01

Revision History

Edition Date Revised location (type) Description

1 2014-08-12 All pages -The edition is initialized to "01" for changing manual code

-Added descriptions about Extended Partitioning function

Preface

iii

CA92344-0536-01

Product operating environment

This product is a computer intended for use in a computer room environment. For details on the product operating

environment, see the following manual:

PRIMEQUEST 2000 Series Hardware Installation Manual (CA92344-0535)

Safety Precautions

Alert messages

This manual uses the following alert messages to prevent users and bystanders from being injured and to prevent

property damage.

This indicates a hazardous (potentially dangerous) situation that is likely to result in death or serious

personal injury if the user does not perform the procedure correctly.

This indicates a hazardous situation that could result in minor or moderate personal injury if the user

does not perform the procedure correctly. This also indicates that damage to the product or other

property may occur if the user does not perform the procedure correctly.

This indicates information that could help the user use the product more efficiently.

Alert messages in the text

An alert statement follows an alert symbol. An alert statement is indented on both ends to distinguish it from regular text.

Similarly, one space line is inserted before and after the alert statement.

Only Fujitsu certified service engineers should perform the following tasks on this product and the

options provided by Fujitsu. Customers must not perform these tasks under any circumstances.

Otherwise, electric shock, injury, or fire may result.

- Newly installing or moving equipment

- Removing the front, rear, and side covers

- Installing and removing built-in options

- Connecting and disconnecting external interface cables

- Maintenance (repair and periodic diagnosis and maintenance)

The List of important alert items table lists important alert items.

Preface

CA92344-0536-01

List of important alert items

This manual does not contain important alert items.

This indicates a hazardous (potentially dangerous) situation that is likely to result in death or serious personal injury if the user

does not perform the procedure correctly.

Work

Category Warning Location

Setup Field engineers perform the following tasks on this product.

Customers must not perform these tasks under any circumstances.

Otherwise, electric shock, injury, or fire may result.

- Newly installing or moving equipment

- Removing the front, rear, and side covers

- Installing and removing built-in options

- Connecting and disconnecting external interface cables

- -Maintenance (repair and periodic diagnosis and maintenance)

1.1 Setup Workflow

This indicates a hazardous situation that could result in minor or moderate personal injury if the user does not perform the

procedure correctly. This also indicates that damage to the product or other property may occur if the user does not perform

the procedure correctly.

Work

Category Warning Location

Normal

operation The unit may be damaged or operating abnormally.

- Follow the precautions, warnings, and instructions shown on the main unit.

- Do not block the vent holes.

- Do not install the main unit in a location exposed to direct sunlight or close to

a device that may generate large amounts of heat.

- Do not install the main unit in a location exposed to large amounts of dust,

corrosive gas, or salt spray.

- Do not install the main unit in a location subject to strong vibration. Install the

main unit on a flat surface.

- Use grounded Category 3 wiring or better. Using another type of grounded

wiring may cause abnormal operation.

- Do not route cables under the main unit. Do not allow cables to become taut.

- Do not disconnect the power cables while the main unit power is on.

- If it is hard to push the connector latch of a LAN cable or other cable when

attempting to disconnect the cable, push it with a flathead screwdriver.

Forcibly inserting a finger may cause personal injury or damage the unit.

- Do not place anything on top of the main unit. Do not work above or on top of

2.1Safety

Precautions

Preface

CA92344-0536-01

the main unit.

- Prevent rapid rises in the ambient temperature during winter. Such an abrupt

temperature change maycause condensation to form in the main unit.Allow

sufficient warm-up time before starting operation.

- Do not install the main unit close to a photocopier, air-conditioning unit,

welder, or other device that generates electromagnetic noise.

- Do not install the main unit close to a device that generates large amounts of

electrical noise.

- Do not connect the main unit to the same power supply line as an elevator in

the facility or other equipment that would expose it to sudden voltage drops.

- Implement antistatic measures at the installation site.

- Confirm that the power supply voltage and frequency are adequate

according to the respective ratings shown on the main unit.

- Do not insert or drop foreign matter into the openings of the main unit. The

main unit contains high-voltage components. If any metallic matter or other

electro-conductive object enters the main unit through an opening, it may

cause a short circuit. This may lead to fire, electric shock, or damage to the

main unit.

- For details on maintenance of the main unit, contact the distributor where you

purchased your product, or your sales representative.

Normal

operation (Ignition)

When over current is detected and the power is cut off by tripping the breaker of the

AC power or optional power distribution box, there is a possibility that failure, such

as short circuit occurring in the main unit. In such case, contact to your sales

representative or field engineer without turning on the power supply again.

3.2.1 Power-on/off

of main unit

Normal

operation (Damage to data)

Confirm that the System Power LED of the OPLisoff before turning off the main

power. If you turn off the main power while the System Power LED of the OPL is

on, data may be damaged.

3.2.1 Power-on/off

of main unit

Normal

operation (Damage to data)

Confirm that selection of disk is right, when choosing a dumping device. If selection

is mistaken, data may be damaged.

5.3 Setting of

sadump

Preface

CA92344-0536-01

Warning labels

Never remove the warning labels.

Warning label location (the main cabinet top)

Preface

vii

CA92344-0536-01

Warning label location (the main cabinet left)

Warning label location (PCI_Box)

Preface

viii

CA92344-0536-01

Notes on Handling the Product

About this product

This product is designed and manufactured for standard applications. Such applications include, but are not limited to,

general office work, personal and home use, and general industrial use. The product is not intended for applications that

require extremely high levels of safety to be guaranteed (referred to below as "safety-critical" applications). Use of the

product for a safety-critical application may present a significant risk of personal injury and/or death. Such applications

include, but are not limited to, nuclear reactor control, aircraft flight control, air traffic control, mass transit control, medical

life support, and missile launch control. Customers shall not use the product for a safety-critical application without

guaranteeing the required level of safety. Customers who plan to use the product in a safety-critical system are requested

to consult the Fujitsu sales representatives in charge.

Storage of accessories

Keep the accessories in a safe place because they are required for server operation.

Adding optional products

For stable operation of the PRIMEQUEST 2000 series server, use only a Fujitsu-certified optional product as an added

option.

Note that the PRIMEQUEST 2000 series server is not guaranteed to operate with any optional product not certified by

Fujitsu.

Exportation/release of this product

Exportation/release of this product may require necessary procedures in accordance with the regulations of the Foreign

Exchange and Foreign Trade Control Law of Japan and/or US export control laws.

Maintenance

Only Fujitsu certified service engineers should perform the following tasks on this product and the

options provided by Fujitsu. Customers must not perform these tasks under any circumstances.

Otherwise, electric shock, injury, or fire may result.

- Newly installing or moving equipment

- Removing the front, rear, and side covers

- Installing and removing built-in options

- Connecting and disconnecting external interface cables

- Maintenance (repair and periodic diagnosis and maintenance)

Only Fujitsu certified service engineers should perform the following tasks on this product and the

options provided by Fujitsu. Customers must not perform these tasks under any circumstances.

Otherwise, product failure may result. PRIMEQUEST 2000 Series General Description

- Unpacking an optional Fujitsu product, such as an optional adapter, delivered to the customer

Modifying or recycling the product

Modifying this product or recycling a secondhand product by overhauling it without prior approval

may result in personal injury to users and/or bystanders or damage to the product and/or other

property.

Preface

CA92344-0536-01

Note on erasing data from hard disks when disposing of the product or transferring it

Disposing of this product or transferring it as is may enable third parties to access the data on the hard disk and use it for

unforeseen purposes. To prevent the leakage of confidential information and important data, all of the data on the hard

disk must be erased before disposal or transfer of the product.

However, it can be difficult to completely erase all of the data from the hard disk. Simply initializing (reformatting) the hard

disk or deleting files on the operating system is insufficient to erase the data, even though the data appears at a glance to

have been erased. This type of operation only makes it impossible to access the data from the operating system.

Malicious third parties can restore this data.

If you save your confidential information or other important data on the hard disk, you should completely erase the data,

instead of simply carrying out the aforementioned operation, to prevent the data from being restored. To prevent important

data on the hard disk from being leaked when the product is disposed of or transferred, you will need to take care to erase

all the data recorded on the hard disk on your own responsibility.

Furthermore, if a software license agreement restricts the transfer of the software (operating system and application

software) on the hard disk in theserver or other product to a third party, transferring the product without deleting the

software from the hard disk may violate the agreement. Adequate verification from this point of view is also necessary.

Product and service inquiries

For all product use and technical inquiries, contact the distributor where you purchased your product, or a Fujitsu sales

representative or systems engineer (SE). If you do not know the appropriate contact address for inquiries about the

PRIMEQUEST 2000 series, use the Fujitsu contact line.

Fujitsu contact line

We acceptWeb inquiries. For details, visit our website:

https://www-s.fujitsu.com/global/contact/computing/PRMQST_feedback.html

Warranty

If a component failure occurs during the warranty period, we will repair it free of charge in accordance with the terms of the

warranty agreement. For details, see the warranty.

Before requesting a repair

If a problem occurs with the product, confirm the problem by referring to 11.2 Troubleshooting in the PRIMEQUEST 2000

Series Administration Manual (CA92344-0537). If the error recurs, contact your sales representative or a field engineer.

Confirm the model name and serial number shown on the label affixed to the right front of the device and report it. Also

check any other required items beforehand according to 11.2 Troubleshooting in the PRIMEQUEST 2000 Series

Administration Manual (CA92344-0537).

The system settings saved by the customer will be used during maintenance.

Andere Handbücher für PRIMEQUEST 2000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMEQUEST 520A Technisches Handbuch

Fujitsu

Fujitsu SPARC Enterprise M4000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu SPARC Enterprise M4000 Technisches Datenblatt

Fujitsu

Fujitsu PRIMERGY RX200 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Leitfaden

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY SX980 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY CX400 M4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy N800 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Installations- und Betriebsanleitung

Fujitsu

Fujitsu FUTRO S9010 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Service-Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung