Fujitsu PRIMERGY RX2520 M5 Bedienungsanleitung
Copyright and Trademarks
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Documentation creation according
to DIN EN ISO 9001:2015
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2015.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright 2019 FUJITSU LIMITED
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.
RX2520 M5 Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure that
these safety notes are understood before using the product. Keep this manual
and the "Safety Notes and Regulations" manual in a safe place for easy
reference while using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the printed circuit board
assemblies of the product and in the mouse and keyboard are limited-life
components. Use of these components beyond their operating life may result in
electrolyte leakage or depletion, potentially causing emission of foul odor or
smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
Operating Manual RX2520 M5
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, the use of an
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for Japan:
About SATA HDDs
The SATA version of this server supports HDDs with SATA/BC-SATA storage
interfaces. Please note that the usage and operation conditions differ
depending on the type of HDD used.
For more information on the usage and operation conditions of each available
type of HDD, see the following internet address:
http://jp.fujitsu.com/platform/server/primergy/harddisk/
RX2520 M5 Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . . 9
2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1 Documentation overview . . . . . . . . . . . . . . . . . . . 11
3 Product description . . . . . . . . . . . . . . . . . . . . . . 15
3.1 Overview of the server . . . . . . . . . . . . . . . . . . . . . 15
3.1.1 Server front . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.1.1.1 3.5-inch HDD versions . . . . . . . . . . . . . . . . . . . . 15
3.1.1.2 2.5-inch HDD/SSD versions . . . . . . . . . . . . . . . . . 16
3.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.3 Connectors, controls and indicators . . . . . . . . . . . . . 24
3.3.1 Connectors on the server . . . . . . . . . . . . . . . . . . . . 24
3.3.1.1 Server front . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.3.1.2 Server rear . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.3.2 Controls and indicators on the server front . . . . . . . . . . . 26
3.3.2.1 Controls on the front panel . . . . . . . . . . . . . . . . . . 26
3.3.2.2 Indicators on the front panel . . . . . . . . . . . . . . . . . 28
3.3.2.3 Indicator on the ODD . . . . . . . . . . . . . . . . . . . . . 31
3.3.2.4 Indicators on the hot-plug HDD/SSD module . . . . . . . . 32
3.3.3 Indicators on the server rear . . . . . . . . . . . . . . . . . . . 33
3.3.3.1 Indicators on the I/O panel . . . . . . . . . . . . . . . . . . 33
3.3.3.2 Indicator on hot-plug PSU . . . . . . . . . . . . . . . . . . 37
4 Important information . . . . . . . . . . . . . . . . . . . . . 39
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 39
4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 47
4.3 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 48
Operating Manual RX2520 M5
Contents
4.5 Environmental protection . . . . . . . . . . . . . . . . . . . . 49
5 Starting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.1 Installation steps, overview . . . . . . . . . . . . . . . . . . . 52
5.2 Unpacking the server . . . . . . . . . . . . . . . . . . . . . . 54
5.3 Installing the server in the rack . . . . . . . . . . . . . . . . . 55
5.3.1 Installing the server in the rack . . . . . . . . . . . . . . . . . . 57
5.4 Connecting cables . . . . . . . . . . . . . . . . . . . . . . . . 60
5.4.1 Notes on connecting/disconnecting cables . . . . . . . . . . . . 60
5.4.2 Connecting devices to the server . . . . . . . . . . . . . . . . . 61
5.4.3 Connecting the power cord . . . . . . . . . . . . . . . . . . . . 62
5.4.3.1 Connecting the power cord . . . . . . . . . . . . . . . . . . 62
5.4.3.2 Using the cable clamp . . . . . . . . . . . . . . . . . . . . . 63
5.5 Switching on the server for the first time . . . . . . . . . . . 64
5.6 Configuring the server with ServerView Installation
Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
5.6.1 Configuring the server and installing the operating system . . . . 65
5.6.1.1 Configuring the controllers . . . . . . . . . . . . . . . . . . 66
5.6.1.2 Installing the operating system . . . . . . . . . . . . . . . . 66
5.7 Configuring the server without ServerView Installation
Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
5.7.1 Configuring the server and installing the operating system . . . . 67
5.7.1.1 Configuring the onboard SAS/SATA controller . . . . . . . . 67
5.7.1.2 Installing the operating system . . . . . . . . . . . . . . . . 67
5.8 Notes on configuring controllers . . . . . . . . . . . . . . . . 68
5.8.1 Notes on onboard SATA controllers . . . . . . . . . . . . . . . . 68
5.8.2 Notes on SAS/SATA RAID controllers . . . . . . . . . . . . . . 68
5.9 Note on operating system . . . . . . . . . . . . . . . . . . . 69
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.1 Switching the server on and off . . . . . . . . . . . . . . . . 71
6.2 Installing HDD/SSD modules . . . . . . . . . . . . . . . . . . 74
6.2.1 Installing 3.5-inch HDD modules . . . . . . . . . . . . . . . . . 74
6.2.1.1 Removing a 3.5-inch HDD dummy module . . . . . . . . . . 74
RX2520 M5 Operating Manual
Contents
6.2.1.2 Installing a 3.5-inch HDD module . . . . . . . . . . . . . . 74
6.2.2 Installing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . . 76
6.2.2.1 Removing a 2.5-inch HDD/SSD dummy module . . . . . . . 76
6.2.2.2 Installing a 2.5-inch HDD/SSD module . . . . . . . . . . . . 76
6.3 Installing a second PSU . . . . . . . . . . . . . . . . . . . . 78
6.3.1 Removing the dummy cover . . . . . . . . . . . . . . . . . . . 78
6.3.2 Installing a PSU . . . . . . . . . . . . . . . . . . . . . . . . . 78
6.4 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . 80
7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . 81
8 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 89
9 Warranty and service . . . . . . . . . . . . . . . . . . . . . . 97
Operating Manual RX2520 M5
Contents
RX2520 M5 Operating Manual 9
1 Introduction
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY RX2520 M5 into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
1.1 Notational conventions
The following notational conventions are used in this manual:
Text in bold Indicates references to names of interface elements.
Text in
monospace
Indicates commands.
"Quotation marks" Indicate names of chapters and terms that are being
emphasized.
ÊDescribes activities that must be performed in the order
shown.
VCAUTION! Pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
IIndicates additional information, notes and tips.
10 Operating Manual RX2520 M5
Introduction
Andere Handbücher für PRIMERGY RX2520 M5
1
Inhaltsverzeichnis
Andere Fujitsu Server Handbücher
Fujitsu
Fujitsu PRIMERGY TX100 S2 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY RX600 S4 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY TX150 S5 Bedienungsanleitung
Fujitsu
Fujitsu SPARC M12-1 Bedienungsanleitung
Fujitsu
Fujitsu ETERNUS LT160 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY ECONEL 30 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY TX200 S7 Bedienungsanleitung
Fujitsu
Fujitsu SPARC M12-2 Bedienungsanleitung
Fujitsu
Fujitsu SE500 Bedienungsanleitung
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung
Fujitsu
Fujitsu GP 7000F Bedienungsanleitung
Fujitsu
Fujitsu SPARC Enterprise M8000 Service-Handbuch
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung
Fujitsu
Fujitsu Server PRIMERGY TX1330 M1 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY BX900 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY T850 Benutzerhandbuch
Fujitsu
Fujitsu SPARC M12 Bedienungsanleitung
Fujitsu
Fujitsu SPARC Enterprise M3000 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY TX2550 M4 Bedienungsanleitung
Fujitsu
Fujitsu FUTRO S550 Bedienungsanleitung
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung