Fujitsu PRIMERGY RX200 S3 Bedienungsanleitung

PRIMERGY RX200 S3

Server

Operating Manual

Edition June 2006

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX200 S3 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Documentation Overview . . . . . . . . . . . . . . . . . . . . . 5

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . 11

1.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2 Installation Steps: Overview . . . . . . . . . . . . . . . . . 15

3 Important Information . . . . . . . . . . . . . . . . . . . . . 17

3.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.2 CE Certificate of Conformity . . . . . . . . . . . . . . . . . . 24

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . . 25

3.4 Transporting the Server . . . . . . . . . . . . . . . . . . . . . 26

3.5 Notes on Installing in the Rack . . . . . . . . . . . . . . . . . 26

3.6 Environmental protection . . . . . . . . . . . . . . . . . . . . 27

4 Hardware Installation . . . . . . . . . . . . . . . . . . . . . 29

4.1 Unpacking the Server . . . . . . . . . . . . . . . . . . . . . . 30

4.2 Installing/Removing the Server in/from the Rack . . . . . . . . 31

4.2.1 Mounting in the PRIMECENTER/DataCenter Rack . . . . . . . 35

4.2.2 Installation in 3rd Party Racks . . . . . . . . . . . . . . . . . . 38

4.2.3 Inserting the server . . . . . . . . . . . . . . . . . . . . . . . 39

4.3 Connecting Devices to the Server . . . . . . . . . . . . . . . . 41

4.4 Connecting the Server to the Mains . . . . . . . . . . . . . . . 43

4.5 Instructions for Connecting/Disconnecting Cables . . . . . . . 44

5 Startup and Operation . . . . . . . . . . . . . . . . . . . . . 45

5.1 Controls and Displays . . . . . . . . . . . . . . . . . . . . . . 45

5.1.1 Front of server . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.1.2 Hard disk drive control indicators . . . . . . . . . . . . . . . . 48

5.1.3 Rear of Server . . . . . . . . . . . . . . . . . . . . . . . . . . 49

5.1.4 Indicator on hot plug power supply unit . . . . . . . . . . . . . 51

5.1.5 Indicators of the hot-plug system fans . . . . . . . . . . . . . . 52

5.2 Switching the Server On and Off . . . . . . . . . . . . . . . . 53

5.3 Configuring the Server . . . . . . . . . . . . . . . . . . . . . 55

5.3.1 Configuration with ServerStart . . . . . . . . . . . . . . . . . 55

5.3.2 Configuration without ServerStart . . . . . . . . . . . . . . . . 56

5.4 Cleaning the Server . . . . . . . . . . . . . . . . . . . . . . . 57

6 Property and Data Protection . . . . . . . . . . . . . . . . . 59

6.1 BIOS Setup Security Functions . . . . . . . . . . . . . . . . . 59

Operating Manual RX200 S3

Contents

7 Troubleshooting and Tips . . . . . . . . . . . . . . . . . . . 61

7.1 Power On Indicator Remains Unlit . . . . . . . . . . . . . . . 61

7.2 Server Switches Itself Off . . . . . . . . . . . . . . . . . . . . 62

7.3 Screen Remains Blank . . . . . . . . . . . . . . . . . . . . . 62

7.4 Flickering Stripes on Monitor Screen . . . . . . . . . . . . . . 63

7.5 No Screen Display or Display Drifts . . . . . . . . . . . . . . . 63

7.6 No Mouse Pointer Displayed on Screen . . . . . . . . . . . . . 64

7.7 Incorrect Date and Time . . . . . . . . . . . . . . . . . . . . . 64

7.8 System Will Not Boot . . . . . . . . . . . . . . . . . . . . . . 64

7.9 Drives Reported as "Dead" When Starting System . . . . . . . 65

7.10 Added Drive Reported as Defective . . . . . . . . . . . . . . . 65

7.11 Error Message on Screen . . . . . . . . . . . . . . . . . . . . 65

8 Hot plug components . . . . . . . . . . . . . . . . . . . . . 67

8.1 Hot-plug power supply units . . . . . . . . . . . . . . . . . . . 67

8.1.1 Removing the dummy unit . . . . . . . . . . . . . . . . . . . . 67

8.1.2 Adding a Hot Pluggable Power Supply Unit . . . . . . . . . . . 68

8.1.3 Replacing Hot Pluggable Power Supply Units . . . . . . . . . . 68

8.2 Hot-pluggable hard disk drives . . . . . . . . . . . . . . . . . 69

8.2.1 Handling Hard Disk Drives/HDD Modules . . . . . . . . . . . . 70

8.2.2 Installing/removing the dummy unit . . . . . . . . . . . . . . . 71

8.2.3 Installing/Removing the HDD Module . . . . . . . . . . . . . . 72

8.3 Replacing a Hot-plug Fan . . . . . . . . . . . . . . . . . . . . 78

8.3.1 Exchanging the fan . . . . . . . . . . . . . . . . . . . . . . . 79

8.4 Opening/Closing the Fan Cover . . . . . . . . . . . . . . . . . 81

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Literature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

RX200 S3 Operating Manual 5

1Introduction

The PRIMERGY RX200 S3 server is an Intel-based server for mid-size

networks and large companies. The server is suitable for use as a file server

and also as an application, information or Internet server.

Thanks to its highly developed hardware and software components, the

PRIMERGY RX200 S3 server offers a high level of data security and availability.

These components include hot-plug hard disk drive modules, redundant system

fans and power supply units, the Server Management ServerView Suite,

Prefailure Detection and Analysing (PDA) and Automatic Server Reconfigu-

ration and Restart (ASR&R).

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

intrusion detection and the lockable rack door.

The server occupies one height unit in the rack.

1.1 Documentation Overview

IPRIMERGY manuals are available in PDF format on the ServerBooks CD.

The ServerBooks CD is part of the ServerStart Suite supplied with every

server system.

The PDF files for the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available in the Internet can be found via the URL: http://manuals.fujitsu-

siemens.com (click industry standard servers).

Concept and target group of this manual

This operating manual describes how to install, set up and operate your server.

This manual is intended for those responsible for installing the hardware and

ensuring that the system runs smoothly. The manual contains all the information

required to install and operate your PRIMERGY RX200 S3.

It is assumed that users have some knowledge of hardware and data trans-

mission, and a basic familiarity with the operating system that is being used.

6 Operating Manual RX200 S3

Documentation Overview Introduction

Additional server documentation

The PRIMERGY RX200 S3 documentation consists of the following additional

manuals:

– “Safety” manual (print version delivered together with the system, PDF file

available on the ServerBooks CD)

– “Warranty” manual (print version delivered together with the system, PDF file

available on the ServerBooks CD)

– Technical Manual for the D2300 system board (PDF file available on the

ServerBooks CD)

– “BIOS Setup” (PDF file available on the ServerBooks CD)

– “PRIMERGY ServerView Suite - ServerStart” (PDF file available on the

ServerBooks CD)

– “PRIMERGY RX200 S3 Options Guide” (PDF file available on the

ServerBooks CD)

– “Global Array Manager Client Software User’s Guide” (PDF file available on

the ServerBooks CD)

– “Global Array Manager Server Software User’s Guide” (PDF file available on

the ServerBooks CD)

– “Integrated Mirroring User’s Guide” (PDF file available on the supplied

ServerBooks CD)

IIf you need a replacement copy of the ServerBooks CD send the details of

your server to the following e-mail address:

Reklamat-PC-LOG@fujitsu-siemens.com

Further sources of information:

– Technical manual for the corresponding rack

– Manual for the monitor

– Manual for ServerView server management

– Manual for the remote testing and diagnostic system RemoteView

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

(see also “Literature” on page 89).

RX200 S3 Operating Manual 7

Introduction Features

1.2 Features

System board

The features of the system board (D2300) are described in the technical manual

for the system board in relation to the hardware and in the BIOS setup manual

(see “Literature” on page 89).

Hard disk drives

The server can accommodate two 3.5 inch or four 2.5 inch SAS/SATA hard disk

drive modules. Each hard disk drive module (HDD module) can accommodate

a SAS/SATA hard disk drive with a maximum height of 1 or 0.5 inch. The module

is connected to the SAS/SATA backplane without cables. This allows hard disk

drive modules to be simply plugged in or pulled out (for further details see

section “Hot-pluggable hard disk drives” on page 69).

The internal hard disk drives are controlled exclusively by the onboard SAS

controller.

If the server has a RAID configuration, the HDD modules can be exchanged

during operation (hot plugging).

Onboard SAS controller with IME functionality

The SAS controller is equipped with "Integrated Mirroring Enhanced" function-

ality for operating internal hard disks. "Integrated Mirroring Enhanced" also

provides RAID 0.1 functionality for configuring the internal hard disks

(IME Level 1).

ITo configure "Integrated Mirroring Enhanced", the controller has its own

RAIDSelect Utility. For further information, refer to the “Integrated

Mirroring User’s Guide” on the ServerBooks CD (select “Controllers” from

the menu).

Zero Channel RAID (ZCR) controller (option)

Optionally a ZCR controller (PCI card) can be installed. In addition to RAID

levels 0 and 1, this RAID controller also offers the option of configuring RAID 5.

The ZCR controller uses the Onboard SAS controller using logic that is specially

integrated on the system board.

8 Operating Manual RX200 S3

Features Introduction

Accessible drive

A mounting location is provided for a slimline CD/DVD ROM drive (optional) The

accessible drive installed here cannot be replaced during operation.

USB port

The two USB ports on the front of the device support activities carried out by the

service technician. The maximum length of the external cable are three meters.

Power supply

In its basic configuration, the server has a hot-pluggable power supply unit that

adjusts automatically to any power voltage in the range from 100 V to 240 V. As

an option, the power supply can be expanded with an extra power supply unit to

create a redundant power supply. If a power supply unit fails, the redundant

configuration assures continued operation. The defective power supply unit can

be replaced during operation (for further details see section “Hot-plug power

supply units” on page 67).

Cooling

Each processor has a heat sink. Further cooling for the installed processors is

provided by five fan units (redundant). If one fan in a redundant unit fails, the

system is able to continue operating without limitations. If a fan fails, it can be

replaced while the system is running (for further details see section “Replacing

a Hot-plug Fan” on page 78).

High level of availability and data security

When memory data is accessed, 1-bit errors in the main memory are identified

and automatically corrected with the ECC (Error Correcting Code) method. The

patented memory scrubbing function regularly starts up the EDC mechanism

and thus ensures continuous data integrity.

The memory modules used support SDDC technology (Chipkill™), which also

increases the effectiveness of the monitoring and correction of memory errors.

Memory Mirroring is also supported (requires four or eight memory modules).

Memory Mirroring is roughly comparable to RAID level 1 for hard disk arrays.

Memory modules are protected against failure by mirroring. The basic configu-

ration requires four identical memory modules in two different banks.

ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in

case of an error and automatically "hides" the defective system components.

RX200 S3 Operating Manual 9

Introduction Features

The PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens

Computers analyzes and monitors all components that are critical for system

reliability.

Optional RAID controllers support RAID Levels 0, 1 and 5 and increase system

availability.

Server management

Server management is implemented using the ServerView software supplied

combined with PDA (Prefailure Detection and Analyzing) technology from

Fujitsu Siemens. PDA reports the threat of a system error or overload at an early

stage, allowing preventive measures to be taken.

ServerView enables the management of all PRIMERGY servers in the network

via a central console. The following key features are supported among others

by ServerView in this context.

●Remote power on (Wake On LAN)

●Temperature monitoring of the CPU and the surrounding area

●Monitoring of the utilization of the PCI buses

●Detailed status and error reports for bus systems, processors and main

memory

●Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)

in the event of failure of memory modules or processors

●Power monitoring

●Early detection of a defective fan

●Watchdog timer for operating system monitoring and application monitoring

with ASR&R

Further information about ServerView server management is provided in the

associated documentation (see “Literature” on page 89).

ServerStart

The ServerStart software supplied allows you to configure your PRIMERGY

server quickly and purposefully. User-guided menus are available for installing

the server operating system (for further details see section “Configuring the

Server” on page 55).

10 Operating Manual RX200 S3

Features Introduction

Service and support

PRIMERGY servers are service-friendly and modular, thus enabling quick and

simple maintenance.

The handles and locks (touch point) of the different hot-plug components are

colored green to ensure simple and immediate recognition.

In order to avoid damage to components by incorrect handling when they are

being installed and removed, green highlighting also identifies the areas of all

components that can be touched without causing damage to the respective

component.

PRIMERGY diagnostic LEDs fitted on the system board show which component

on the board (memory module, CPU) is not functioning properly.

The Flash EPROM program supplied with the Fujitsu Siemens Computers

utilities supports a fast BIOS update.

With the iRMC (integrated Remote Management Controller) on the system

board and the optional remote testing and diagnostic system RemoteView, the

PRIMERGY RX200 S3 server can also be maintained and serviced remotely.

This enables remote diagnosis for system analysis, remote configuration and

remote restart should the operating system or hardware fail.

RemoteView

RemoteView is the remote management solution from Fujitsu Siemens

Computers for Intel-based PRIMERGY systems. RemoteView and the relevant

hardware components integrated on the system board allow remote monitoring

and maintenance as well as fast restoration of operability in the event of errors.

Remote monitoring and maintenance avoids time-consuming and costly on-site

repairs and reduces service costs. This leads to a reduction in the total cost of

ownership and an excellent return on investment for the remote management

solution.

Andere Handbücher für PRIMERGY RX200 S3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Bedienungsanleitung

Fujitsu

Fujitsu Primergy Econel 100 S2 Leitfaden

Fujitsu

Fujitsu M10 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S7 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX120 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY GX2570 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2560 M4 Bedienungsanleitung

Fujitsu

Fujitsu primequest 2400E2 Leitfaden

Fujitsu

Fujitsu PRIMERGY CX25 0 M4 Series Montageanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX150 S8 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Service-Handbuch

Fujitsu

Fujitsu Primergy RX600 Leitfaden

Fujitsu

Fujitsu T2555SC020IN Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu FUTRO S900 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Installationsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Technisches Datenblatt

Fujitsu

Fujitsu B23Q8WD-G-01-J Montageanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S1p Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung