Fujitsu B23Q8WD-G-01-J Montageanleitung

B23Q8WD-G-01-J

SPARC Enterprise Servers

Hardware Platform Guide

for Solaris™ Operating System

Preface

Solaris™ Operating System is described as Solaris OS in this manual.

Purpose This manual provides information and notes for installing the software on SPARC Enterprise servers.

Intended Readers

This manual is intended for system administrators who install Solaris OS and administrate the systems.

Readers are expected to have the basic knowledge of a system administrator.

OrganizationThis manual is organized as follows:

zChapter 1 Before installing Solaris OS

This chapter describes information to confirm before installing.

zChapter 2 Notes when installing Solaris OS

This chapter describes notes when installing Solaris OS.

zChapter 3 Operation after Installation

This chapter describes operations required after installing.

zChapter 4 Notes on Solaris OS operation

This chapter describes notes on Solaris OS operation.

zChapter 5 Bug information and notes

This chapter describes bug information and notes about Solaris OS.

Related manuals

The documentation set for SPARC Enterprise servers is available on the following website:

Global Site

http://www.fujitsu.com/global/services/computing/server/sparcenterprise/downloads/manual/

Japanese Site

http://primeserver.fujitsu.com/sparcenterprise/catalog/manual/

Text Conventions

This manual uses the following fonts and symbols to express specific types of information.

Fonts/Symbols Meaning Example

AaBbCc123 Commands that users enter. #ls -l <Return>

Prompt Notations

The prompt notations used in this manual are as follows.

Shell Prompt Notations

XSCF XSCF>

C shell machine-name%

C shell super user machine-name#

Bourne shell and Korn shell $

Bourne shell and Korn shell super user #

OpenBoot PROM ok

High Risk Activity

This Product is designed, developed and manufactured as contemplated for general use, including without

limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed,

developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless

extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or

other loss (hereinafter “High Safety Required Use”), including without limitation, nuclear reaction control

in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support

system, missile launch control in weapon system. You shall not use this Product without securing the

sufficient safety required for the High Safety Required Use. If you wish to use this Product for High Safety

Required Use, please consult with our sales representatives in charge before such use.

Trademarks Sun, Sun Microsystems, the Sun Logo, Solaris and all Solaris based marks and logos are trademarks or

registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries, and are used under license.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems,

Inc. in the United States and other countries.

All SPARC trademarks are used under license from SPARC International,Inc. and are trademarks or

registered trademarks of that company in the U.S. and other countries. Products with the SPARC trademark

are based on architecture developed by Sun Microsystems,Inc.

All other products, or company names mentioned in this document are claimed as trademark and trade

names by their respective companies.

March, 2007

October 2008 tenth Edition

Notes

zThis manual may not be copied by any means without the express written permission

of FUJITSU LIMITED.

zFUJITSU LIMITED reserves the right to make changes to this manual without prior

notice.

Contents

Chapter 1 Before installing Solaris OS ..................................................................................................................1

1.1 How to determine swap size ............................................................................................................................................1

1.2 How to use DVD drive.....................................................................................................................................................1

1.3 Flow of installation..........................................................................................................................................................1

Chapter 2 Notes when installing Solaris OS .........................................................................................................3

2.1 Solaris Registration Wizard.............................................................................................................................................3

2.2 Messages of st driver .......................................................................................................................................................3

2.3 Set up for NFS V4............................................................................................................................................................3

2.4 Selection of keyboard layout............................................................................................................................................4

2.5 SPARC Enterprise T1000 server .....................................................................................................................................4

Chapter 3 Operations after Installation.................................................................................................................5

3.1 Set up system with large amount of memory...................................................................................................................5

3.2 Add or remove DVD Drive Unit and TAPE Drive Unit on SPARC Enterprise M8000/M9000 servers (Solaris 10 OS

11/06 only).......................................................................................................................................................................6

3.3 Wrong I/O device FRU could be reported .......................................................................................................................6

Chapter 4 Notes on Solaris OS operation...............................................................................................................9

4.1 Enter the OpenBoot environment.....................................................................................................................................9

4.2 CD-ROM/DVD-ROM in UNIX file system (UFS) format..............................................................................................9

4.3 TTYA port of SPARC Enterprise T1000/T2000/T5120/T5140/T5220/T5240 servers....................................................9

4.4 The order of instance numbers of optional cards .............................................................................................................9

4.5 Changing of operation mode of on-board network interface (e1000g) on SPARC Enterprise T2000/T5120/T5220

server .............................................................................................................................................................................10

4.6 Support of JumboFrame for on-board network interface(bge) on SPARC Enterprise T1000 server (Solaris 10 OS

11/06 only).................................................................................................................................................................................11

4.7 Notes on using the Standard Solaris Fibre Channel Driver............................................................................................11

4.7.1 I/O Performance.....................................................................................................................................................11

4.7.2 Multi-host Connection ...........................................................................................................................................11

4.8 XAUI Card Disables an Onboard Network Port on SPARC Enterprise T5140/T5240 server.......................................12

Chapter 5 Bug information and notes ..................................................................................................................13

Chapter 1 Before installing Solaris OS

This chapter describes what information should be confirmed before installing Solaris OS.

1.1 How to determine swap size

Swap space size is determined by considering the swap space size requirement of the application and the

physical memory size.

If the system runs out of swap space when the application is in use, the system may terminate abnormally.

Therefore, ensure that you allocate enough swap space to satisfy the demands of all the applications.

The memory image is written once in the swap space listed first in the /etc/vfstab file. If the system crashes,

the memory image in the swap space is copied as a crash dump file under the /var/crash/hostname directory

as the system reboots.

To ensure crash dump files are complete, follow the table to determine the swap space size.

Table 1.1 Swap space

System Physical memory Swap space size

Less than 32Gbytes Greater than 2Gbytes

32Gbytes and less than

128Gbytes

Greater than 4Gbytes

128Gbytes and less than

256Gbytes

Greater than 8Gbytes

SPARC Enterprise Servers

T1000/T2000/T5120/T5140

/T5220/T5240/M3000/M4000/M

5000

/M8000/M9000

256Gbytes and greater

than 256Gbytes

Greater than 6 percent of physical

memory

Note:

A greater amount of swap space may be required for the memory image, depending on how the system has

been used at the time of the system crash. If the memory image is larger than the swap size, the crash

dump file cannot be taken. In this case, enlarge the swap space or the device of the crash dump file with

the dumpadm(1M) command. For use of the dumpadm(1M), see the relevant man pages.

1.2 How to use DVD drive

When using DVD drive on SPARC Enterprise M8000/M9000 servers, it needs to be set up with the

cfgdevice(8) command of eXtended System Control Facility (XSCF).

For more details, refer to “SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF

Reference Manual”.

1.3 Flow of installation

Flow of installation is as follows:

1. Set up DVD drive if you use DVD drive on SPARC Enterprise M8000/M9000 servers to install

Solaris OS. For more information, refer to “SPARC Enterprise

M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual”.

2. Install Solaris OS.

3. Add the following lines to /etc/system.

SPARC Enterprise T1000/T2000/T5120/T5140/T5220/T5240 servers

set autoup=60 *1

set pcie:pcie_aer_ce_mask=0x2001 *2

set pcie_expected_ce_mask = 0x2001 *6

set maxfastscan=0x2000

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 servers

set autoup=60 *1

set drmach:fmem_timeout=30 *2

set heaplp_use_stlb=0 *3

set pcie:pcie_aer_ce_mask=0x2001 *2

set mc-opl:mc_max_rewrite_loop=20000 *4

set drmach:drmach_disable_mcopy = 1 *5

set pcie_expected_ce_mask = 0x2001 *6

set maxfastscan=0x2000

*1 The value depends on amount of the installed memory. For more information, refer to “3.1 Set up

system with large amount of memory.”

*2 This is no longer required in Solaris 10 OS 8/07 or later.

*3 The following messages is displayed when the system is rebooted until 125100-04 or later is

applied but this messages can be safely ignored. This is no longer required in Solaris 10 OS 10/08

or later.

sorry, variable 'heaplp_use_stlb' is not defined in the 'kernel'

*4 This is no longer required in Solaris 10 OS 5/08 or later.

*5 This is required only when Dynamic Reconfiguration is used.

*6 This is no longer required in Solaris 10 OS 10/08 or later.

4. Apply the latest Recommended & Security Patch Cluster for Solaris 10 OS.

The latest Recommended & Security Patch Cluster contains mandatory patches for SPARC

Enterprise servers and important modifications.

5. If Enhanced Support Facility comes with SPARC Enterprise Servers, install it.

6. If PTF R07021 or later comes with Solaris 10 OS, apply the PTF for Solaris 10 OS.

7. If PTF R07021 or later comes with Solaris 10 OS, apply the cluster for ESF.

8. Install Sun Explorer Data collector 5.7 or later if you install Solaris OS on SPARC Enterprise

T1000/T2000 servers. Install Sun Explorer Data collector 5.10 or later if you install Solaris OS on

SPARC Enterprise T5120/T5140/T5220/T5240 servers.

You can download the latest Recommended & Security Patch Clusters and Recommended & Security

Patches from the following site.

Global Site

http://www.fujitsu.com/global/support/software/security/products-s/patch-info/

North American Site

https://download.computers.us.fujitsu.com/

Japanese site

https://software.fujitsu.com/jp/security/products-others/unix/

Please ask how to get Sun Explorer Data Collection to your Sales representative or Technical Support.

Chapter 2 Notes when installing Solaris OS

This chapter describes notes when installing Solaris OS.

2.1 Solaris Registration Wizard

Although the window "Solaris Registration Wizard" may pop up when you login as super user, never

2.2 Messages of st driver

After upgrading to Solaris 10 or installing Solaris 10, if you edit /kernel/drv/st.conf file, the following

message may be displayed while the system is booted afterwards.

<device path name> (stXX):

<data-property-name> options value invalid bits set: 0x4000

"XX" shows the instance number of st driver.

This message shows that the bit value 0x4000(ST_BUFFERED_WRITES) of <options> in the

/kernel/drv/st.conf file is invalid. However the system is not influenced even if this message is displayed,

because the Solaris 10 system ignores the bit value ST_BUFFERED_WRITES of <options>.

If you do not want to display the message, change the <options> setting in the /kernel/drv/st.conf file so that

the bit value 0x4000 is not specified. Refer to the following example.

Before changing the st.conf file

Tape-config-list=<vid+pid>, <pretty print>, <data-property-name>;

<data-property-name> = 1,0x34,0,0xd639,4,0x00,0x8c,0x8c,0x8c,3;

After changing the st.conf file

Tape-config-list=<vid+pid>, <pretty print>, <data-property-name>;

<data-property-name> = 1,0x34,0,0x9639,4,0x00,0x8c,0x8c,0x8c,3;

2.3 Set up for NFS V4

At the first system boot after installing Solaris 10 OS 11/06 or earlier, you are prompted to answer the

following question about NFSv4. If you need to override NFSv4 default domain, answer “yes”.

This system is configured with NFS version 4, which uses a domain

name that is automatically derived from the system's name services.

The derived domain name is sufficient for most configurations. In a

few cases, mounts that cross different domains might cause files to

be owned by "nobody" due to the lack of a common domain name.

Do you need to override the system's default NFS version 4 domain

name (yes/no) ? [no] :

You are prompted to select NFSv4 domain name configuration during installation since Solaris 10 OS 8/07.

- NFSv4 Domain Name -----------------------------------------------------------

NFS version 4 uses a domain name that is automatically derived from the

system's naming services. The derived domain name is sufficient for most

configurations. In a few cases, mounts that cross domain boundaries might

cause files to appear to be owned by "nobody" due to the lack of a common

domain name.

The current NFSv4 default domain is: ""

NFSv4 Domain Configuration

----------------------------------------------

[ ] Use the NFSv4 domain derived by the system

[ ] Specify a different NFSv4 domain

2.4 Selection of keyboard layout

You may be prompted to select the keyboard layout during installation since Solaris 10 OS 8/07.

If no keyboard is connected, select the default value (US-English) and continue the installation.

- Configure Keyboard Layout ---------------------------------------------------

Please specify the keyboard layout from the list below.

> To make a selection, use the arrow keys to highlight the option and

press Return to mark it [X].

Keyboard Layout

-------------------------

^ [ ] Slovenian

| [ ] Slovakian

| [ ] Spanish

| [ ] Swedish

| [ ] Swiss-French

| [ ] Swiss-German

| [ ] Taiwanese

| [ ] TurkishQ

| [ ] TurkishF

| [ ] UK-English

- [X] US-English

----------------------------------------------------------------------------

F2_Continue F6_Help

2.5 SPARC Enterprise T1000 server

SPARC Enterprise T1000 server is not able to connect a CD/DVD drive. Install Solaris OS with network

installation.

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY CX2550 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX500 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M6 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Montageanleitung

Fujitsu

Fujitsu Primergy CX270 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Leitfaden

Fujitsu

Fujitsu Primergy RX300 S4 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX300 S7 Benutzerhandbuch

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Installations- und Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Service-Handbuch

Fujitsu

Fujitsu teamserver M851i Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S2 Leitfaden

Fujitsu

Fujitsu PRIMERGY RX200 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3p Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 520A Technisches Handbuch

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung