Fujitsu SPARC Enterprise M4000 Handbuch

C120-E361-04EN

SPARC®Enterprise

M4000/M5000/M8000/M9000 Server

RCI Build Procedure

C120-E361-04EN

ABOUT THIS PRODUCT

This product is designed and manufactured for use in standard applications such as

office work, personal device, household appliance, and general industrial

applications. This product is not intended for use in nuclear-reactor control systems,

aeronautical and space systems, air traffic control systems, mass transportation

control systems, medical devices for life support, missile launch control systems or

other specialized uses in which extremely high levels of reliability are required, the

required levels of safety cannot be guaranteed, or a failure or operational error could

be life-threatening or could cause physical injury (referred to hereafter as "high-risk"

use). You shall not use this product without securing the sufficient safety required for

high-risk use. If you wish to use this product for high-risk use, please consult with

sales representatives in charge before such use.

TRADEMARK ACKNOWLEDGEMENTS

zUNIX is a registered trademark of The Open Group in the United States and other

countries, licensed exclusively through X/Open Company Limited.

zSun, Sun Microsystems, the Sun Logo, Solaris and all Solaris based marks and

logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the

U.S. and other countries, and are used under license.

zEthernet is a registered trademark of Xerox Corporation in the United States and in

certain other countries.

zAll SPARC trademarks are registered trademarks of SPARC International, Inc.

Products bearing the SPARC trademarks are based on an architecture developed by

Sun Microsystems, Inc.

zAll other product names mentioned herein are the trademarks or registered

trademarks of their respective owners.

zSystem and product names in this manual are not always noted with trademark or

registered trademark symbols(™), (®).

The contents of this manual may be revised without prior notice.

The contents of this manual shall not be disclosed in any way or reproduced in any

media without the express written permission of Fujitsu Limited.

C120-E361-04EN i

Preface

This manual explains the RCI build procedure of the SPARC Enterprise M4000/M5000/M8000/M9000 server.

This manual is intended for authorized service personnel who perform maintenance work of the server or field

engineers.

In this manual, the verification of the standalone operation of the server is assumed to have been completed. Read

this manual together with the reference manuals cited in it.

This manual explains the following:

zStructure and Contents of This Manual

zSPARC Enterprise Mx000 Servers Documentation

zText Conventions

zPrompt Notations

zSyntax of the Command Line Interface (CLI)

Structure and Contents of This Manual

This manual is organized as described below.

Chapter 1, "RCI Build Procedure"

Explains the initial build procedure of the Remote Cabinet Interface (RCI) in the installation work.

Appendix A, "Troubleshooting."

Explains how to deal with possible problems during the RCI setup.

ii C120-E361-04EN

Preface

SPARC Enterprise Mx000 Servers Documentation

The manuals listed below are provided for reference.

(a) Manuals on the Web

The latest versions of all the SPARC Enterprise Series manuals are available at the following websites:

Global Site

http://www.fujitsu.com/sparcenterprise/manual/

Japanese Site

http://primeserver.fujitsu.com/sparcenterprise/manual/

Book Titles Manual Codes

SPARC Enterprise M4000/M5000 Servers Site Planning Guide C120-H015

SPARC Enterprise M8000/M9000 Servers Site Planning Guide C120-H014

SPARC Enterprise Equipment Rack Mounting Guide C120-H016

SPARC Enterprise M4000/M5000 Servers Getting Started Guide C120-E345

SPARC Enterprise M8000/M9000 Servers Getting Started Guide C120-E323

SPARC Enterprise M4000/M5000 Servers Overview Guide C120-E346

SPARC Enterprise M8000/M9000 Servers Overview Guide C120-E324

Important Safety Information for Hardware Systems C120-E391

SPARC Enterprise M4000/M5000 Servers Safety and Compliance Guide C120-E348

SPARC Enterprise M8000/M9000 Servers Safety and Compliance Guide C120-E326

External I/O Expansion Unit Safety and Compliance Guide C120-E457

SPARC Enterprise M4000 Server Unpacking Guide C120-E349

SPARC Enterprise M5000 Server Unpacking Guide C120-E350

SPARC Enterprise M8000/M9000 Servers Unpacking Guide C120-E327

SPARC Enterprise M4000/M5000 Servers Installation Guide C120-E351

SPARC Enterprise M8000/M9000 Servers Installation Guide C120-E328

SPARC Enterprise M4000/M5000 Servers Service Manual C120-E352

SPARC Enterprise M8000/M9000 Servers Service Manual C120-E330

External I/O Expansion Unit Installation and Service Manual C120-E329

SPARC Enterprise M4000/M5000/M8000/M9000 Servers RCI Build Procedure C120-E361

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Administration Guide C120-E331

SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User’s Guide C120-E332

SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual C120-E333

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration

(DR) User’s Guide

C120-E335

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD)

User’s Guide

C120-E336

SPARC Enterprise M4000/M5000/M8000/M9000 Servers RCI User’s Guide C120-E360

SPARC Enterprise M4000/M5000 Servers Product Notes Go to the Web

SPARC Enterprise M8000/M9000 Servers Product Notes Go to the Web

External I/O Expansion Unit Product Notes C120-E456

Note: Product Notes and Release Notes are available on the website only. Please check for the recent

update on your product.

C120-E361-04EN iii

Preface

(b) Documentation CD

For the Documentation CD, please contact your local sales representative.

- SPARC Enterprise M4000/M5000 Servers Documentation CD (C120-E365)

- SPARC Enterprise M8000/M9000 Servers Documentation CD (C120-E364).

Remote maintenance service

(d) Provided in system

Man page of the XSCF

(e) Solaris Operating System-related manuals

http://docs.sun.com

(f) Information on Using the RCI function

For information on using the RCI function, refer to the SPARC Enterprise M4000/M5000/M8000/M9000

Servers RCI Build Procedure (This manual) and SPARC Enterprise M4000/M5000/M8000/M9000 Servers

RCI User’s Guide provided on the website.

Text Conventions

This manual uses the following fonts and symbols to express specific types of information:

Book Titles Manual Codes

Enhanced Support Facility User's Guide for REMCS C112-B067

Note: The man page can be referenced on the XSCF Shell, and it provides the same content as the

SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.

Typeface or symbol Meaning Example

AaBbCc123 What you type, when contrasted

with on-screen computer output.

This font represents the example of

command input in the frame.

XSCF> adduser jsmith

AaBbCc123 The names of commands, files, and

directories; on-screen computer

output.

This font represents the example of

command input in the frame.

XSCF> showuser -p

User Name: jsmith

Privileges: useradm

auditadm

Italic Indicates the name of a reference manua See the XSCF User's Guide.

" " Indicates names of chapters, sections,

items, buttons, or menus

See Chapter 2, "Preparation for

Installation."

iv C120-E361-04EN

Preface

Prompt Notations

The notation used for prompts in this manual is shown below.Syntax of the Command Line Interface (CLI)

Syntax of the Command Line Interface (CLI)

The command syntax is described below.

Command syntax

The command syntax is as follows:

zA variable that requires input of a value is enclosed in < >.

zAn optional element is enclosed in [ ].

zA group of options for an optional keyword is enclosed in [ ] and delimited by |.

zA group of options for a mandatory keyword is enclosed in {} and delimited by |.

zThe command syntax is shown in a frame.

Example

Shell Prompt notation

XSCF XSCF>

C shell machine-name%

C shell superuser machine-name#

Bourne shell and Korn shell $

Bourne shell and Korn shell super-users #

OpenBoot PROM ok

XSCF> showuser -a

Andere Handbücher für SPARC Enterprise M4000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY ECONEL 30 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S5 Leitfaden

Fujitsu

Fujitsu SE310 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX900 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY DX920 S3 Handbuch

Fujitsu

Fujitsu FUTRO S5010 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S450 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 870 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3p Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S2 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 PG-LNB101 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 480 Technisches Handbuch

Fujitsu

Fujitsu SPARC M10-4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER850 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung