Fujitsu PRIMERGY RX2510 M2 Bedienungsanleitung

Operating Manual - English

FUJITSU Server PRIMERGY RX2510 M2

Operating Manual

February 2016

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX2510 M2 Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual RX2510 M2

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

RX2510 M2 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups for this manual . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 11

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 13

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 20

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 27

4 Important information . . . . . . . . . . . . . . . . . . . . . 29

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 29

4.2 FCC Class A Compliance Statement . . . . . . . . . . . . . 37

4.3 Transporting the server . . . . . . . . . . . . . . . . . . . . 38

4.4 Notes on installing the server in the rack . . . . . . . . . . . 38

4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 39

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 41

5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 42

5.2 Installing/removing the server in/from the rack . . . . . . . 43

5.3 Connecting devices to the server . . . . . . . . . . . . . . . 44

5.3.1 Connecting the monitor . . . . . . . . . . . . . . . . . . . . . 45

5.4 Connecting the server to the mains . . . . . . . . . . . . . . 46

5.4.1 Using the cable clamps (hot-plug PSU) . . . . . . . . . . . . . 47

5.5 Notes on connecting/disconnecting cables . . . . . . . . . 47

Operating Manual RX2510 M2

Contents

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 49

6.1 Control elements and indicators . . . . . . . . . . . . . . . . 49

6.1.1 Front of the server . . . . . . . . . . . . . . . . . . . . . . . . 49

6.1.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 50

6.1.1.2 Indicators on the control panel . . . . . . . . . . . . . . . . 50

6.1.1.3 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

6.1.1.4 Indicators on the components . . . . . . . . . . . . . . . . . 54

6.1.2 Rear of the server . . . . . . . . . . . . . . . . . . . . . . . . . 55

6.1.3 Indicators of the hot-plug system fans . . . . . . . . . . . . . . 57

6.2 Switching the server on and off . . . . . . . . . . . . . . . . 58

6.3 Configuring the server . . . . . . . . . . . . . . . . . . . . . 61

6.3.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 61

6.3.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 62

6.3.3 Configuring the server and installing the operating system

with the ServerView Installation Manager . . . . . . . . . . . . . 63

6.3.4 Configuring the server and installing the operating system

without the ServerView Installation Manager . . . . . . . . . . . 64

6.4 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 65

7 Property and data protection . . . . . . . . . . . . . . . . . . 67

7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 67

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 69

8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 69

8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 70

8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 70

8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 71

8.5 No screen display or display drifts . . . . . . . . . . . . . . . 71

8.6 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 72

8.7 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 72

8.8 Drives reported as “dead” when starting system . . . . . . . 72

8.9 Added drive reported as defective . . . . . . . . . . . . . . . 73

RX2510 M2 Operating Manual

Contents

8.10 Error message on screen . . . . . . . . . . . . . . . . . . . 73

8.11 Expansion cards or onboard devices not recognized . . . . 73

8.12 Temperature warning . . . . . . . . . . . . . . . . . . . . . . 74

8.13 No effect of keyboard or mouse . . . . . . . . . . . . . . . . 74

8.14 Optical drive cannot read data . . . . . . . . . . . . . . . . 74

Operating Manual RX2510 M2

Contents

RX2510 M2 Operating Manual 9

1 Introduction

The PRIMERGY RX2510 M2 is a rack server that provides high performance,

expandability and energy efficiency in 1 height unit (HU) space saving housing.

Thus, the PRIMERGY RX2510 M2 is ideal for virtualization and cloud, small

databases as well as for high performance computing.

Thanks to its highly developed hardware and software components, the

PRIMERGY RX2510 M2 server offers a high level of data security and

availability. These include the Server Management ServerView Suite, Prefailure

Detection and Analysis (PDA) and Automatic Server Reconfiguration and

Restart (ASR&R).

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

lockable rack door.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your server.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY RX2510 M2 into operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

10 Operating Manual RX2510 M2

Introduction

1.2 Documentation overview

More information on your PRIMERGY RX2510 M2 can be found in the following

documents:

– "ServerView Quick Start Guide"

– "Safety Notes and Regulations" manual

"安全上のご注意 " for the Japanese market

– "Warranty" manual

"保証書 " for the Japanese market

– "ServerView Suite Local Service Concept - LSC" manual

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for the Japanese market

– "FUJITSU Server PRIMERGY RX2510 M2 Upgrade and Maintenance

Manual"

– "D3279 BIOS Setup Utility for FUJITSU Server PRIMERGY RX2510 M2

Reference Manual"

– "Integrated RAID for SAS User Guide"

– "LSI MegaRAID - SAS Software User Guide"

– "Modular RAID Controller / Modular SAS HBA Installation Guide"

IAll documentation on PRIMERGY hardware and ServerView software is

available online from the Fujitsu manuals server at:

– For the global market http://manuals.ts.fujitsu.com

– For the Japanese market:

http://jp.fujitsu.com/platform/server/primergy/manual

The complete PRIMERGY documentation set can also be downloaded

as a DVD ISO image at:

– For the global market: ftp://ftp.ts.fujitsu.com/images/serverview/manuals

– For the Japanese market:

http://jp.fujitsu.com/platform/server/primergy/downloads

IFor the Japanese market:

Before using the product, please check for additional information that

may be available under the following URL:

http://jp.fujitsu.com/platform/server/primergy/products/note/

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu SPARC Enterprise M8000 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S1p Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Betriebsanleitung

Fujitsu

Fujitsu FW-S Series SERVIS Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX920 S2 Bedienungsanleitung

Fujitsu

Fujitsu FD-1000ST Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Benutzerhandbuch

Fujitsu

Fujitsu PRIMERGY TX200 S2 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu Primergy CX270 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Betriebsanleitung

Fujitsu

Fujitsu Primergy RX4770 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S2 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX900 S2 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung