Fujitsu PRIMERGY RX2560 M2 Bedienungsanleitung

Upgrade and Maintenance Manual - English

FUJITSU Server

PRIMERGY TX2560 M2 / RX2560 M2

Upgrade and Maintenance Manual

November 2016

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject toavailability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market: About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual

Version history

Issue number Reason for update

1.0 / March 2016 Initial release

2.0 / November 2016 General update

Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . 28

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 29

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 31

2.1.1 Customer Replaceable Units (CRU) . . . . . . . . . . . . . . . 31

2.1.2 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 32

2.1.3 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 33

2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 34

2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 35

2.4 Documents you need at hand . . . . . . . . . . . . . . . . . 39

3 Important information . . . . . . . . . . . . . . . . . . . . . 43

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 43

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 51

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 51

3.4 Environmental protection . . . . . . . . . . . . . . . . . . . 52

4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 55

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 55

4.1.1 Locating the defective server . . . . . . . . . . . . . . . . . . 55

4.1.2 Determining the error class . . . . . . . . . . . . . . . . . . . 56

4.1.2.1 Global Error indicator . . . . . . . . . . . . . . . . . . . . 56

4.1.2.2 Customer Self Service (CSS) indicator . . . . . . . . . . . 56

4.1.3 Locating the defective component . . . . . . . . . . . . . . . . 57

4.1.3.1 Local diagnostic indicators on the front . . . . . . . . . . . 57

4.1.3.2 Local diagnostic indicators on the system board . . . . . . . 57

4.2 Shutting down the server . . . . . . . . . . . . . . . . . . . 58

4.3 Disconnecting the power cord . . . . . . . . . . . . . . . . 59

Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2

Contents

4.4 Getting access to the component . . . . . . . . . . . . . . . 61

4.4.1 Rack server (RX2560 M2) . . . . . . . . . . . . . . . . . . . . 61

4.4.1.1 Extending the server out of the rack . . . . . . . . . . . . . 61

4.4.1.2 Removing the server from the rack . . . . . . . . . . . . . . 63

4.4.1.3 Removing the top cover . . . . . . . . . . . . . . . . . . . . 65

4.4.1.4 Removing the ID card . . . . . . . . . . . . . . . . . . . . . 66

4.4.1.5 Removing the rack front cover . . . . . . . . . . . . . . . . 67

4.4.2 Tower server (TX2560 M2) . . . . . . . . . . . . . . . . . . . . 69

4.4.2.1 Unlocking the server . . . . . . . . . . . . . . . . . . . . . 69

4.4.2.2 Removing the side cover . . . . . . . . . . . . . . . . . . . 70

4.4.2.3 Removing accessible drive and HDD bay covers . . . . . . . 71

4.4.2.4 Removing the ID card . . . . . . . . . . . . . . . . . . . . . 72

4.4.2.5 Removing the front cover . . . . . . . . . . . . . . . . . . . 73

4.5 Reassembling . . . . . . . . . . . . . . . . . . . . . . . . . . 74

4.5.1 Rack server (RX2560 M2) . . . . . . . . . . . . . . . . . . . . 74

4.5.1.1 Installing the rack mounting frame . . . . . . . . . . . . . . 74

4.5.1.2 Installing the ID card . . . . . . . . . . . . . . . . . . . . . 75

4.5.1.3 Installing the top cover . . . . . . . . . . . . . . . . . . . . 76

4.5.1.4 Mounting the server in the rack . . . . . . . . . . . . . . . . 78

4.5.1.5 Sliding the server into the rack . . . . . . . . . . . . . . . . 80

4.5.2 Tower server (TX2560 M2) . . . . . . . . . . . . . . . . . . . . 81

4.5.2.1 Installing the front cover . . . . . . . . . . . . . . . . . . . . 81

4.5.2.2 Installing the ID card . . . . . . . . . . . . . . . . . . . . . 82

4.5.2.3 Installing accessible drive and HDD bay covers . . . . . . . 83

4.5.2.4 Installing the side cover . . . . . . . . . . . . . . . . . . . . 84

4.5.2.5 Locking the server . . . . . . . . . . . . . . . . . . . . . . . 86

4.6 Connecting the power cord . . . . . . . . . . . . . . . . . . . 87

4.7 Switching on the server . . . . . . . . . . . . . . . . . . . . . 90

4.8 Handling the system air duct . . . . . . . . . . . . . . . . . . 91

4.8.1 Removing the system air duct . . . . . . . . . . . . . . . . . . 91

4.8.2 Installing the system air duct . . . . . . . . . . . . . . . . . . . 92

4.9 Handling the system fan holder . . . . . . . . . . . . . . . . 93

4.9.1 Removing the system fan holder . . . . . . . . . . . . . . . . . 93

4.9.2 Installing the system fan holder . . . . . . . . . . . . . . . . . . 94

4.10 Handling riser modules . . . . . . . . . . . . . . . . . . . . . 95

4.10.1 Installing a riser module . . . . . . . . . . . . . . . . . . . . . . 95

4.10.2 Removing a riser module . . . . . . . . . . . . . . . . . . . . . 98

4.11 Handling accessible drive bays . . . . . . . . . . . . . . . 100

4.11.1 Opening the accessible drive locking bar . . . . . . . . . . . . 100

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual

Contents

4.11.1.1 Tower server (TX2560 M2) . . . . . . . . . . . . . . . . . . 100

4.11.1.2 Rack server (RX2560 M2) . . . . . . . . . . . . . . . . . . 101

4.11.2 Closing the accessible drive locking bar . . . . . . . . . . . . . 102

4.11.2.1 Tower server (TX2560 M2) . . . . . . . . . . . . . . . . . . 102

4.11.2.2 Rack server (RX2560 M2) . . . . . . . . . . . . . . . . . . 103

4.11.3 Accessible drive filler covers . . . . . . . . . . . . . . . . . . . 104

4.11.3.1 Removing accessible drive filler covers . . . . . . . . . . . 104

4.11.3.2 Installing accessible drive filler covers . . . . . . . . . . . . 105

4.11.4 Accessible drive covers . . . . . . . . . . . . . . . . . . . . . 106

4.11.4.1 Removing accessible drive covers . . . . . . . . . . . . . . 106

4.11.4.2 Installing accessible drive covers . . . . . . . . . . . . . . 107

4.12 Handling the anti-tilt bracket . . . . . . . . . . . . . . . . . 108

4.12.1 Installing the anti-tilt bracket . . . . . . . . . . . . . . . . . . . 108

4.12.2 Removing the anti-tilt bracket . . . . . . . . . . . . . . . . . . 109

5 Basic software procedures . . . . . . . . . . . . . . . . . . 111

5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 111

5.1.1 Suspending BitLocker functionality . . . . . . . . . . . . . . . 111

5.1.2 Disabling SVOM boot watchdog functionality . . . . . . . . . . 112

5.1.2.1 Viewing boot watchdog settings . . . . . . . . . . . . . . . 112

5.1.2.2 Configuring boot watchdog settings . . . . . . . . . . . . . 113

5.1.3 Removing backup and optical disk media . . . . . . . . . . . . 114

5.1.4 Verifying and configuring the backup software solution . . . . . 115

5.1.5 Note on server maintenance in a Multipath I/O environment . . 115

5.1.6 Switching on the ID indicator . . . . . . . . . . . . . . . . . . 118

5.2 Completing the maintenance task . . . . . . . . . . . . . . . 119

5.2.1 Updating or recovering the system board BIOS and iRMC . . . 119

5.2.1.1 Updating or recovering the system board BIOS . . . . . . . 119

5.2.1.2 Updating or recovering the iRMC . . . . . . . . . . . . . . 119

5.2.2 Verifying system information backup / restore . . . . . . . . . . 121

5.2.3 Updating RAID controller firmware . . . . . . . . . . . . . . . 122

5.2.4 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . 123

5.2.5 Reconfiguring the backup software solution . . . . . . . . . . . 124

5.2.6 Resetting the boot retry counter . . . . . . . . . . . . . . . . . 124

5.2.6.1 Viewing the boot retry counter . . . . . . . . . . . . . . . . 124

5.2.6.2 Resetting the boot retry counter . . . . . . . . . . . . . . . 125

5.2.7 Resetting the error status after replacing memory modules or

processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

5.2.7.1 Memory modules . . . . . . . . . . . . . . . . . . . . . . . 126

Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2

Contents

5.2.7.2 Processors . . . . . . . . . . . . . . . . . . . . . . . . . 127

5.2.8 Performing a fan test . . . . . . . . . . . . . . . . . . . . . . 129

5.2.9 Enabling SVOM boot watchdog functionality . . . . . . . . . . 130

5.2.10 Enabling replaced components in the system BIOS . . . . . . 131

5.2.11 Verifying the memory mode . . . . . . . . . . . . . . . . . . . 132

5.2.12 Verifying the system time settings . . . . . . . . . . . . . . . 132

5.2.13 Viewing and clearing the System Event Log (SEL) . . . . . . . 133

5.2.13.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . 133

5.2.13.2 Clearing the SEL . . . . . . . . . . . . . . . . . . . . . . 134

5.2.14 Updating the NIC configuration file in a Linux and VMware

environment . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

5.2.15 Resuming BitLocker functionality . . . . . . . . . . . . . . . . 136

5.2.16 Performing a RAID array rebuild . . . . . . . . . . . . . . . . 137

5.2.17 Looking up changed MAC / WWN addresses . . . . . . . . . 137

5.2.17.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . 138

5.2.17.2 Looking up WWN addresses . . . . . . . . . . . . . . . . 138

5.2.18 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . 139

5.2.19 Configuring LAN teaming . . . . . . . . . . . . . . . . . . . . 140

5.2.19.1 After replacing / upgrading LAN controllers . . . . . . . . . 140

5.2.19.2 After replacing the system board . . . . . . . . . . . . . . 140

5.2.20 Switching off the ID indicator . . . . . . . . . . . . . . . . . . 141

5.2.21 Specifying the chassis model . . . . . . . . . . . . . . . . . . 141

6 Power supply unit (PSU) . . . . . . . . . . . . . . . . . . . 143

6.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 144

6.1.1 PSU configurations . . . . . . . . . . . . . . . . . . . . . . . 145

6.1.2 Assembly rules . . . . . . . . . . . . . . . . . . . . . . . . . 145

6.2 Installing a PSU . . . . . . . . . . . . . . . . . . . . . . . . 146

6.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 146

6.2.2 Removing the PSU dummy module . . . . . . . . . . . . . . 146

6.2.3 Installing a PSU . . . . . . . . . . . . . . . . . . . . . . . . . 147

6.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 147

6.3 Removing a PSU . . . . . . . . . . . . . . . . . . . . . . . . 148

6.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 148

6.3.2 Removing a PSU . . . . . . . . . . . . . . . . . . . . . . . . 149

6.3.3 Installing a PSU dummy module . . . . . . . . . . . . . . . . 149

6.4 Replacing a PSU . . . . . . . . . . . . . . . . . . . . . . . . 150

6.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 150

6.4.2 Removing the defective PSU . . . . . . . . . . . . . . . . . . 151

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu SPARC Enterprise M4000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX300 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2520 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S7 Benutzerhandbuch

Fujitsu

Fujitsu PRIMERGY RX200 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY CX25 0 M4 Series Montageanleitung

Fujitsu

Fujitsu PRIMERGY CX120 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S8 Benutzerhandbuch

Fujitsu

Fujitsu PRIMEQUEST 2800B3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Installationsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Leitfaden

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu S120 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 PG-LNB101 Bedienungsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX100 S7 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung