Fujitsu PRIMERGY CX120 S1 Betriebsanleitung

Service Supplement - English

PRIMERGY CX120 S1 Server

Service Supplement

July 2010

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

PRIMERGY CX120 S1 Service Supplement

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety notes and other important information" and

ensure these safety notes are understood before using the product.

Keep this manual and the manual "Safety notes and other important

information" in a safe place for easy reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Service Supplement PRIMERGY CX120 S1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by FUJITSU may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

PRIMERGY CX120 S1 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 19

4.1 Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.1.1 Removing a PRIMERGY CX120 S1 server from the system unit 19

4.1.2 Installing a PRIMERGY CX120 S1 server in the system unit . . 21

4.1.2.1 Rack installation . . . . . . . . . . . . . . . . . . . . . . . 21

4.1.2.2 Network cabling . . . . . . . . . . . . . . . . . . . . . . . 23

4.1.3 Handling server dummy covers . . . . . . . . . . . . . . . . . 26

4.1.3.1 Installing a server dummy cover . . . . . . . . . . . . . . . 26

4.1.3.2 Removing a server dummy cover . . . . . . . . . . . . . . 28

4.1.4 Opening and closing the server . . . . . . . . . . . . . . . . . 29

4.1.4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 29

4.1.4.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . 31

4.2 Replacing the front panel module . . . . . . . . . . . . . . . 32

4.3 Replacing the hard disk drives . . . . . . . . . . . . . . . . 34

4.4 Expansion cards . . . . . . . . . . . . . . . . . . . . . . . . 40

4.4.1 Replacing expansion cards . . . . . . . . . . . . . . . . . . . 40

4.4.2 Replacing the PCI riser card . . . . . . . . . . . . . . . . . . . 44

4.5 Replacing the Remote Management Module (RMM3) . . . . 45

4.5.1 Removing the RMM3 module . . . . . . . . . . . . . . . . . . 46

4.5.2 Installing the RMM3 module . . . . . . . . . . . . . . . . . . . 48

Service Supplement PRIMERGY CX120 S1

Contents

4.6 Replacing the processor . . . . . . . . . . . . . . . . . . . . 50

4.6.1 Removing a heat sink . . . . . . . . . . . . . . . . . . . . . . . 51

4.6.2 Removing a processor . . . . . . . . . . . . . . . . . . . . . . 53

4.6.3 Installing a processor . . . . . . . . . . . . . . . . . . . . . . . 56

4.6.4 Installing a heat sink . . . . . . . . . . . . . . . . . . . . . . . 59

4.7 Installing / replacing memory modules . . . . . . . . . . . . 61

4.7.1 Removing a memory module . . . . . . . . . . . . . . . . . . . 63

4.7.2 Installing a memory module . . . . . . . . . . . . . . . . . . . 63

4.8 Replacing the system board . . . . . . . . . . . . . . . . . . 65

4.9 Replacing the power supply unit . . . . . . . . . . . . . . . . 72

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

5.1 Used screws . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

5.2 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

5.2.1 Front panel board . . . . . . . . . . . . . . . . . . . . . . . . . 76

5.2.2 PCI riser card (D3052-A10) . . . . . . . . . . . . . . . . . . . . 77

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

PRIMERGY CX120 S1 Service Supplement 5

1 Introduction

The PRIMERGY CX120 S1 server is an Intel-based server for small and

medium-sized networks. The compact server casing (only one height unit) as

well as its scalability and security features make the PRIMERGY CX120 S1 the

perfect choice for operational areas data centers, Internet- and application-

hosting.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Technology Solutions GmbH can order a Service

DVD PRIMERGY. On the DVD the following manuals are available in pdf format:

– The "Safety notes and other important information"manual

– The Operating Manual for PRIMERGY CX1000 S1 / CX120 S1

– The Technical Manual for the system board D3052

(Intel Server Board S5500WB Technical Product Specification)

– The Service Supplement PRIMERGY CX120 S1

– The Service Supplement PRIMERGY CX1000 S1 system unit

6 Service Supplement PRIMERGY CX120 S1

Overview of the documentation

Information/procedure Manual

Detailed safety notes "Safety notes and other

important information"

manual

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Rack mounting

Information about the system board:

– Features of the system board

– Board layout

– Jumper settings

– Replacing the battery

Technical Manual

Extensions and upgrades:

– Extending/replacing the main memory

– Installing expansion boards in the PCI slots

– Installing the RMM3 module

Service Supplement

Operating Manual

Network Cabling

Replacement routines:

– Replacing the front panel module

– Replacing the power supply unit

– Replacing HDDs

– Replacing the riser cards / expansion boards

– Replacing the processor / heat sinks

– Replacing the system board

– Replacing RMM3 module

Service Supplement

Board layouts

BIOS setup Technical Manual

Operating Manual

Table 1: Overview of the documentation CX120 S1

PRIMERGY CX120 S1 Service Supplement 7

Notational conventions

1.2 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX100 S1 Betriebsanleitung

Fujitsu

Fujitsu M10 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 400 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER 650 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY ServerView Suite Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Merkblatt

Fujitsu

Fujitsu Primergy RX100 S4 Betriebsanleitung

Fujitsu

Fujitsu ETERNUS CS800 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY B900 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M5 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S2 Bedienungsanleitung

Fujitsu

Fujitsu SE310 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX2510 M2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung