Fujitsu PRIMERGY TX150 S8 Benutzerhandbuch

PRIMERGY TX150 S8

System configurator and order-information guide

Contents

Instructions

Configuration diagram

Configurator

I Basic unit

II Processor

III Memory

IV Graphics

V Accessible drives

VI Hard disk drives

VII External SAS or SCSI Disk Array

VIII Internal Disk Array

IX Fiberchannel

X Communication/Network

XI System Management Products (RemoteView)

XII Miscellaneous

XIII Country specific power cord

Change report

PRIMERGY Server

March 2016

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

Instructions

This document contains basic product and configuration information that will enable you to configure your system via

PC-/System-Architect

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete

PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect.

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through

the configurator by following the lines from the top to the bottom.

Section

III Memory, example

There are X memory slots which can be equipped with XXX MB

It is permissible to make up to X passes through the memory upgrade options

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB

X times

max. X times per system max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

Please note that there are information symbols which indicate necessary information.

Further information in the internet see:

http://ts.fujitsu.com/products/standard_servers/index.html (internet)

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

(extranet)

Prices and availability see price list and PC-/System-Architect.

Subject to change and errors excepted.

Fujitsu PRIMERGY Server 2 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

Configuration diagram PRIMERGY TX150 S8 SATA LFF (3.5") System Unit

System unit ( I )

SIDE VIEW FRONT VIEW

red. Fan / PSU Kit 3 x 5.25" bays available

1. PSU

standard 3 x HH 5.25" free or 2 x HH 5,25" free + Option A or

or Power

2. PSU

Supply 0 x HH 5.25" free + Option C

(red. + hot plug)

Option A Option C

std. PSU + std. Fans

1.6 * 5.25" 3x 1.6 * 5.25"

red. hp PSU + red. Fans

Depending on Base Unit

Processor ( II )

1x Xeon 4C, 6C or 8C or Pentium

CPU incl. Heatpipe

II / A II / B II / C

Accessible drives ( V )

I / A I / B I / C

Mounting Kit DVD(sl) + LSP/LSD: (Option A)

Memory ( III )

- support for SL (0.5") DVD Drive + LSD (Local Service Display)

the CPU offers 2 Banks ( I and II ) with 3 Channels each - occupies one 5.25" bay

MtK DVD(sl) + LSP/LSD + 2x SAS/SATA LFF HDD: (Option B)

- support for 2x 3.5" SAS/SATA HDD hot plug

+ support for SL (0.5") DVD Drive + LSD (Local Service Display)

Extension slots

MtK DVD(sl) + 4x SAS/SATA LFF HDD: (Option C)

- support for 4x 3.5" SAS/SATA HDD hot plug

SAS Controller ( VII ) + support for SL (0.5") DVD Drive

Disk Array ( VIII )

Communication/Network ( IX )

Miscellaneous ( X ) Hard disk drives ( VI )

Slot 6 PCIe-2 x1,170 mm @ PCH

Slot5 PCIe-3 x4, 280 mm @ CPU

Possibility to install PCIe x8 cards; 2nd pref. RAID Slot

Slot 4 PCIe-3 x16, 280 mm @ CPU

Slot 3 PCIe-3 x4, 280 mm @ CPU

Possibility to install PCIe x8 cards

Slot 2 PCIe-2 x4, 235 mm @ PCH

Possibility to install PCIe x8 cards; 1st pref. RAID Slot

Slot 1 (5V): PCI 32-Bit/33MHz, 280mm @ PCH

Key:

Included in basic unit

Option

1.)

2.)

4.)

Fan 1

4x 3,5" HDD Frame

5.)

3.)

LSD Option

Fan 3

4 port SAS Backplane

3x 120 mm Fans (no redundancy)

6.)

3.5"x1" SAS or SATA

Fan 2

6 PCI-Busses

1.6 * 5.25"

not used

1.6 * 5.25"

Slim DVD

Fan4 for Redundancy

Slim DVD

SAS / SATA

Fujitsu PRIMERGY Server 3 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

Configuration diagram PRIMERGY TX150 S8 SFF (2.5") System Unit

System unit ( I )

SIDE VIEW FRONT VIEW

red. Fan / PSU Kit 3 x 5.25" bays available

1. PSU

standard 3 x HH 5.25" free or

or Power 2 x HH 5.25" free + Option A or

2. PSU

Supply 1 x HH 5.25" free + Option D or

(red. + hot plug) 0 x HH 5.25" free + Option A + Option D

std. PSU + std. Fans

Option D

or 8x 2.5"

red. hp PSU + red. Fans

Depending on Base Unit

Option A Option A

Processor ( II ) 1.6 * 5.25" 1.6 * 5.25"

1x Xeon 4C, 6C or 8C or Pentium

CPU incl. Heatpipe

II / A II / B II / C

Accessible drives ( V )

I / A I / B I / C

Mounting Kit DVD(sl) + LSD: (Option A)

Memory ( III ) - support for SL (0.5") DVD Drive + LSD

the CPU offers 2 Banks ( I and II ) with 3 Channels each - occupies one 5.25" bay

optional SFF SAS/SATA HDD extension Box: (Option D)

- support for 8x 2.5" (SFF) SAS/SATA HDD hot plug

Extension slots

- occupies two 5.25" bays

SAS Controller ( VII )

Disk Array ( VIII )

Communication/Network ( IX )

Miscellaneous ( X ) Hard disk drives ( VI )

Slot 6 PCIe-2 x1,170 mm

Slot5 PCIe-3 x4, 280 mm

Possibility to install PCIe x8 cards; 2nd pref. RAID Slot

Slot 4 PCIe-3 x16, 280 mm

Slot 3 PCIe-3 x4, 280 mm

Possibility to install PCIe x8 cards

Slot 2 PCIe-2 x4, 235 mm @ PCH

Possibility to install PCIe x8 cards; 1st pref. RAID Slot

Slot 1 (5V): PCI 32-Bit/33MHz, 280mm @ PCH

Key:

Included in basic unit

Option

Slim DVD

1.6 * 5.25"

Fan 1

1.6 * 5.25"

Air - Channel

LSD Option

not used

2.5" (SFF) SAS/SATA

not used

2.5" SAS/SATA

Air - Channel

2.5" SAS/SATA

LSD Option

1.)

Fan4 for Redundancy

6 PCI-Busses

2.)

6.)

5.)

4.)

3.)

3x 120 mm Fans (no redundancy)

Fan 3

8 port SAS Backplane

Fan 2

2.5" (SFF) SAS/SATA

8x SFF HDD Frame

2.5" (SFF) SAS/SATA

Fujitsu PRIMERGY Server 4 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

Section

IBasic unit

System unit, Rack and Floorstand, including:

* Two lockable front covers in floorstand version

Door #1 for accessible drive bays

Door #2 for hot plug HDD bays

Both doors may be locked or door #1 may be left open while door #2 is still locked

* backplane with 4 (LFF) or 8 (SFF) bays for hot-plug HD's. Type depending on base unit:

Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only)

Type 2: 8x (2x4) hot plug SFF (2.5") SAS HDD (SAS SFF base units only)

* PSU and Fan Type depending on base unit:

Type 1: standard PSU and standard Fans (3 System Fans)

(V101and V301, V501 and V701 base units)

Type 2: without PSU (450W must be added), 1 additional fan for redundancy

(V201, V401, V601 and V801 base units)

for Type 1 base units there is an upgrade to

hot plug redundant PSU and redundant Fans available

* 3 bays 5.25" for accessible drives (half Hight)

Systemboard D3079 with:

* One Pentium 2c or Xeon 4C, 6C & 8C CPU (Socket-B2)

with 3 memory channels

CPU has to be selected for an orderable basic unit,

* Chipset Intel® C600 Series (codenamed Patsburg)

* 6 PCI slots:

- 1x PCIe-3 x16

- 2x PCIe-3 x4 (mechanically x8)

- 1x PCIe-2 x4 (mechanically x8)

- 1x PCI 32/33

- 1x PCIe-2 x1

- No mix of registered and unbuffered modules is allowed

- First Memory ( one module ) has to be selected for an orderable basic unit

- Memory upgrade is possible module wise for the Independent Channel Mode or

for the Performance Mode,

- Memory mirrroring is supported with 2 identical modules in channel B+C

- Hot Spare Memory is supported with 3 identical modules in channel A+B+C

- SDDC (Chipkill) is supported only for registered memory modules,

* 6-port SATA controller on-board included in Intel Southbridge Patsburg A for SATA Raid0/1,

optional Southbridge Patsburg B with 4 ports for SAS RAID 0/1

Max. 4 SATA / SAS HD`s are supported

Max. 2 SATA accessible drives are supported (DVD, Backup)

* 2x1 Gbit Ethernet LAN on board ( Intel Hartwell);

iSCSI boot integrated in System BIOS as selectable option

* iRMC S3 (integrated Remote Management Controller) on-board server management controller

with dedicated 10/100 Service LAN-port and

integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)

The Service LAN-port can be switched alternatively on standard Gbit LAN port

Interfaces:

* 1x RS-232-C (serial, 9pin) (usable for BMC or OS or shared)

* 1x VGA (15 pin)

* 9x USB 2.0 (UHCI ) with 480MBit/s (4x external at the rear, 2x external at the frontside, 3x internal for backup or UFM)

* 2x LAN RJ45, 1x Service-LAN RJ45

*internal Cables:

1. SATA cable for CD/DVD.

2. Cable for HDD Backplane

3. USB cable (if USB Backup is used)

* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

* Documentation engl. (multilingual on CD)

Start PRIMERGY TX150 S8

Fujitsu PRIMERGY Server 5 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

Floorstand System Rack System

without CPU, Memory and hot plug PSU without CPU, Memory and hot plug PSU - No Rackmount Kit included !

- a CPU has to be configured - a CPU has to be configured - The Rackmount Kit or the

additionally for a base configuration additionally for a base configuration option no Rackmount Kit has

- One memory kit has to be - One memory kit has to be to be ordered separately

configured for a base configuration configured for a base configuration

LFF Base Unit standard S26361-K1424-V101 LFF Base Unit standard S26361-K1424-V501

- 3 std fans and std PSU - 3 std fans and std PSU

- 4-port SAS backplane for 4x 3.5" hot plug SAS - 4-port SAS backplane for 4x 3.5" hot plug SAS

or SATA HDs incl. cables for connection to the

modular or onboard controllers

LFF Base Unit redundant S26361-K1424-V201 LFF Base Unit redundant S26361-K1424-V601

- 3 std fans plus 1 std fan for redundancy

- 1 hp PSU has to be added - 1 hp PSU has to be added

- 4-port SAS backplane for 4x 3.5" hot plug SAS - 4-port SAS backplane for 4x 3.5" hot plug SAS

or SATA HDs incl. cables for connection to the

modular or onboard controllers

SFF Base Unit standard S26361-K1424-V301 SFF Base Unit standard S26361-K1424-V701

- 3 std fans and std PSU - 3 std fans and std PSU

- 8-port SAS backplane for 8x 2.5" hot plug SAS - 8-port SAS backplane for 8x 2.5" hot plug SAS

or SATA HDs incl. cables for connection to the

modular RAID controllers modular RAID controllers

SFF Base Unit redundant S26361-K1424-V401 SFF Base Unit redundant S26361-K1424-V801

- 3 std fans plus 1 std fan for redundancy

- 1 hp PSU has to be added - 1 hp PSU has to be added

- 8-port SAS backplane for 8x 2.5" hot plug SAS - 8-port SAS backplane for 8x 2.5" hot plug SAS

or SATA HDs incl. cables for connection to the

modular RAID controllers modular RAID controllers

PRIMERGY SX150 S8 S26361-K1424-V902

PRIMERGY SX150 S8 Universal Storage Server Cables included in basic unit

hot plug PSU, LFF (3.5") drives, Tower version Cable for CD/DVD is included

All cables for connection of HDD Backplane are included

Cables for USB Backup Drives are automatically provided

if a USB Backup Drive is ordered.

S26361-F3552-E1 S26361-F3552-E1 Only 1 TPM per system.

TPM Module TPM Module Loose delivery for later

Trusted Platform Module on Motherboard Trusted Platform Module on Motherboard integration possible.

Use according to import restrictions Use according to import restrictions

for customer

max. 1x per system max. 1x per system

S26361-F3552-L1

TPM Module add-on kit

C B for later integration (loose delivery)

Trusted Platform Module on Motherboard

Use according to import restrictions

max. 1x per system

Fujitsu PRIMERGY Server 6 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

PRIMECENTER Rack

S26361-F2735-E285 S26361-F2735-E111

RMK-F2_DI_CMA_QRL_LV

No Rackmount-Kit option S26361-F2735-L285

telescopic drop-in rail, full extr.

Only for loose deliveries

RMK-F2_DI_CMA_QRL_LV

1-hand-mounting

No mounting in racks possible for loose delivery

RMK - 1 pair consisting of max. 1x per system

vario carrier length variable S26361-F2735-L31

with quick release lever support Adapter angle PC/DC-Rack, till 200Kg

- telescopic drop-in rails necessary for mounting RMKs in

with CMA adapter asymmetrical racks

1x per system C

S26361-F4530-E10

Mounting of RMK in symmetrical racks

(no support brackets needed)

S26361-F2735-E71

S26361-F2735-E82

Cable Management Arm (CMA) can

Lateral cable management 2U cable management arm (CMA) only be used for FTS RMKs with

for 2U servers or higher

for 2U server or higher

CMA adapter

- for asymmetrical racks - for symmetrical racks

PRIMECENTER S2 or M1 M1 or 3rd party racks S26361-F2735-L82

- 1 bracket PC Rack asym. Fujitsu racks Cable management arm for 2U Server

1x per system 1x per system

or higher for loose delivery

can only be mounted at RMK with

CMA adapter

for loose delivery

SNP:SY-F1647E301-P

Installation ex works for one

server or subsystem.

Hereby the rack will be delivered "Rack-mounting ex factory"

completely pre-mounted and This service is to be ordered once

all wired connections are tested. per installable server/storage

With PCR S2 12U, 24U, 38U and subsystem, in order to get the

PRC M1 16U, 24U, 42U: server/storage subsystem

Systems and components mounted into the racks.

will be delivered installed in the rack In case of the 46 U PCR S2

With PCR S2 racks 46U: this service has to be ordered,

Systems and components

to get the mounting kits and the

will be delivered separately cables installed.

To be ordered only together with

a PRIMECENTER rack

PCR S2 e.g. S26361-K826-V10x

new PCR M1 e.g. S26361-K827-Vxxx

refer PCR S2 or M1 rack configurator

max. 1x per System PRIMERGY Classic 19" rack is not supported

For later conversion the following kits are available:

1.) Conversion kit 2 Floor -> Rack S26361-F1729-L260

Conversion PRIMERGY TX150 S8 base unit floorstand into

base unit rack. Only conversion, no mounting kit.

Mounting kit has to be ordered seperatly.

S26361-F4530-E12

Bracket 2U in asymmetrical racks

Fujitsu PRIMERGY Server 7 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

1x mandatory for redundant base units

S26113-F575-E10 For redundant Base Units only

2x Power supply 450W

(V201, V401, V601 and V801)

(hot plug)

occupies one bay for For redundant floorstand versions only

hot plug power supply

(V201 and V401)

max. 2x per system

A second, redundant power supply requires an additional

country specific power cord (section XIII)

For later upgrades the following kits are available:

1 power supply module 450W hot plug:

S26113-F575-L10

Supplementary module

Attention: There is no power cable included!

Std to Redundant Upgrade Kit S26361-F3699-L1

consisting of a redundant PSU cage and backplane

AND a 4th fan for fan redundancy

Does not contain any PSU module

Section

II Processor

There is1 processor socket available.

Max.1 CPU can be selected per basic unit

Note: Max. DDR3 Bus Speed depends on:

One of following CPU´s has to be selected - max. DDR3 Bus Speed from the CPU and

for an orderable basic unit

- max. DDR3 Memory Speed and

Basic 4C Pentium - max. memory modules on one memory channel

- 1x 64-bit Intel Pentium (5MB shared TLC = Third Level Cache )

1066 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink

occupies CPU socket

Pentium 1403 2C/2T 2.60GHz 5MB 6.40GT/s 1066MHz 80W S26361-F3726-E260

Basic 4C Single Socket Xeon

- 1x 64-bit Intel Xeon (10MB shared TLC = Third Level Cache )

1333 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink

occupies CPU socket

Xeon E5-1410 4C/8T 2.80GHz 10MB 6.40GT/s 1333MHz 80W S26361-F3751-E280

Basic 4C CPU's

- 1x 64-bit Intel Xeon (10MB shared TLC = Third Level Cache )

1066 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink

occupies CPU socket

Xeon E5-2403 4C/4T 1.80GHz 10MB 6.40GT/s 1066MHz 80W S26361-F3684-E180

Xeon E5-2407 4C/4T 2.20GHz 10MB 6.40GT/s 1066MHz 80W S26361-F3684-E220

Standard Turbo 6C CPU's

- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);

1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink

occupies CPU socket

Xeon E5-2420 6C/12T 1.90GHz 15MB 7.20GT/s 1333MHz 95W S26361-F3723-E190

Xeon E5-2430 6C/12T 2.20GHz 15MB 7.20GT/s 1333MHz 95W S26361-F3723-E220

Xeon E5-2440 6C/12T 2.40GHz 15MB 7.20GT/s 1333MHz 95W S26361-F3723-E240

Advanced Turbo+ 8C CPU

- 1x 64-bit Intel Xeon (20MB shared TLC = Third Level Cache ); Hyper-Threading (HT);

1600 MHz DDR3 Bus, 8,00 GT/s QPI Bus and passive heat sink

occupies CPU socket

Xeon E5-2450 8C/16T 2.10GHz 20MB 8.00GT/s 1600MHz 95W S26361-F3724-E210

Low Power 6C CPU

- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);

1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink

occupies CPU socket

Xeon E5-2430L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W

S26361-F3725-E200

Fujitsu PRIMERGY Server 8 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

Section

III Memory

- There are 6 memory slots for max.

96GB using RDIMM (6x 16GB 2R)

24GB using UDIMM (6x 4GB)

- The memory area is divided into 3 channels with 2 slots per channel

- Slot 1 of each channel belongs to memory bank 1, the slot 2 belongs to memory bank 2,

Registered and unbuffered memory modules can be selected

No mix of registered and unbuffered modules allowed.

Memory can be operated at 1.5V or 1.35V, even if the modules are of low voltage type.

Memory operating voltage can be set within BIOS (1.5V is default setting for max. speed).

In a 2 DIMMs per channel configuration, following frequencies are supported:

- 1.5V - 1600MHz max (depending on CPU, special memory modules)

SDDC (Chipkill) is supported for registered x4 organized memory modules only

1.) In the "Independent Channel Mode" is following configuration possible

Channels can be populated in any order in Independent Channel Mode. All 3

channels may be populated in any order and have no matching requirements. All

channels must run at the same interface frequency but individual channels may run at

different DIMM timings (RAS latency, CAS latency, and so forth)

No mix of registered and unbuffered modules allowed.

2.) "Rank Sparing Mode" configuration

- Within a memory channel, one rank is a spare of the other ranks.

The Spare Rank is held in reserve and is not available as system memory

For the effective memory capacity, please refer to the spreadsheet below.

The BIOS is set to the rank sparing setting.

Minimum configuration is: 2x 1R, 2x 2R or 1x4R DDR3 module per channel

This mode is not supported by x8 organized memory modules

3.) "Performance Mode" configuration

- In this configuration, the memory module population ex factory is spread across all channels.

The BIOS is set to the max. performance for memory.

Minimum configuration is: 3x identical modules

4.) In the "Mirrored Channel Mode" is following configuration possible

- Each memory bank can optionally be equipped with 2x registered memory modules

In each memory bank channel B and C has to be

equipped with identical modules for mirrored channel mode.

In channel C is always the mirrored memory of channel B

Minimum configuration is: 2x identical modules

This mode is not supported by x8 organized memory modules

Fujitsu PRIMERGY Server 9 of 24

System configurator and order-information guide

PRIMERGY TX150 S8 Status 2016-02-29

S26361-F3694-E10 Independent Mode

Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined

Requires min 1 memory Module per CPU

S26361-F3695-E1 Rank Sparing Mode Installation

BIOS Setup factory preinstalled to this mode. One Rank is spare of other ranks on the same channel. Spare Rank is not shown in System Memory.

For effective capacity within a channel, please have a look below.

Supported for RDIMM only.

1x Requires min 2x 1R/2R or 1x 4R modules per CPU

S26361-F3695-E2 Performance Mode Installation

BIOS Setup factory preinstalled for max. Performance, LV memory might be set to 1.5V operation. Four identical memory modules

will be equipped in one memory bank to achieve highest memory performance. All four modules are active and full capacity can be used.

Multiple of 3 identical modules to be configured

S26361-F3695-E3 Mirrored Channel Mode Installation

BIOS Setup factory preinstalled to this mode. 2 identical memory modules are always equipped in one memory bank to use the

Mirrored channel Mode. Only one module contains active data, the 2nd module contains mirrored data

Supported for RDIMM only.

2 identical modules to be configured

na na na na na

na na

Minimum one memory module or order code = first memory

Note 1.)

Unbuffered Memory (UDIMM) no SDDC (chipkill) support

Max. DDR3 memory speed depends on the memory configuration

- one DDR3 unbuffered ECC mem. Module, 1.35V

(No of mem modules per channe) as well as on the CPU type.

Choose up to 6 order codes per CPU

The memory channel with the lowest speed defines the speed

6x per of all CPU channels in the system.

CPU, max. 2GB (1x2GB) 1Rx8 L DDR3-1600 U ECC S26361-F3694-E513 For real memory speed (depending on memory type / population),

2 modules

4GB (1x4GB) 2Rx8 L DDR3-1600 U ECC S26361-F3694-E514 please check the spreadsheet "Memory speed" below

per channel Registered Memory (RDIMM) with SDDC (chipkill) support

- one DDR3 registered ECC mem. Module, 1.35V

1600MHz supported with up to 2DPC (8 modules/CPU)

at 1.5V Mix of memory modules is only possible within the same group

Choose up to 6 order codes per CPU

4GB (1x4GB) 1Rx4 L DDR3-1600 R ECC S26361-F3697-E514

8GB (1x8GB) 2Rx4 L DDR3-1600 R ECC S26361-F3697-E515

16GB (1x16GB) 2Rx4 L DDR3-1600 R ECC S26361-F3697-E516

1DPC

2DPC

4GB

12GB

24GB

Effective Memory capacity / Rank Sparing Mode, 1 Channel populated

UDIMM

RDIMM

2GB

4GB

8GB

16GB

Fujitsu PRIMERGY Server 10 of 24

Andere Handbücher für PRIMERGY TX150 S8

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX150 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE700 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu GP 7000F Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S9010 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY ECONEL 30 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Betriebsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX420 S1 Benutzerhandbuch

Fujitsu

Fujitsu SPARC Enterprise T5120 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY SX940 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S8 Benutzerhandbuch

Fujitsu

Fujitsu SPARC Enterprise T5120 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 S6 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung