Fujitsu PRIMERGY RX900 S2 Bedienungsanleitung

Upgrade and Maintenance Manual - English

PRIMERGY RX900 S2 Server

Upgrade and Maintenance Manual

July 2011

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX900 S2 Upgrade and Maintenance Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Upgrade and Maintenance Manual RX900 S2

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market: About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

RX900 S2 Upgrade and Maintenance Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

– USB Flash Module (UFM)

– Replacing the lithium battery

Upgrade and Maintenance Manual RX900 S2

RX900 S2 Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

1.1 Where to find which information? . . . . . . . . . . . . . . . 20

1.1.1 Documents you need at hand . . . . . . . . . . . . . . . . . . 21

1.1.2 Accessing PRIMERGY documentation . . . . . . . . . . . . . 24

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . 24

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 25

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 27

2.2 List of required tools . . . . . . . . . . . . . . . . . . . . . . 29

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 31

4 Basic procedures . . . . . . . . . . . . . . . . . . . . . . . . 37

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 37

4.1.1 Locate the faulty server . . . . . . . . . . . . . . . . . . . . . 37

4.1.2 Locate the faulty component by PRIMERGY diagnostics

indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4.2 Opening the rack door . . . . . . . . . . . . . . . . . . . . . 40

4.3 Shutting down the server . . . . . . . . . . . . . . . . . . . 41

4.4 Sliding the server out of the rack . . . . . . . . . . . . . . . 42

4.5 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 44

4.5.1 Removing the front cover . . . . . . . . . . . . . . . . . . . . 45

4.5.2 Removing the rear cover . . . . . . . . . . . . . . . . . . . . 46

4.6 Closing the server . . . . . . . . . . . . . . . . . . . . . . . 47

4.6.1 Installing the front cover . . . . . . . . . . . . . . . . . . . . . 47

4.6.2 Installing the rear cover . . . . . . . . . . . . . . . . . . . . . 48

4.7 Mounting the server in the rack . . . . . . . . . . . . . . . . 49

4.8 Bringing the server back to operation . . . . . . . . . . . . 51

Upgrade and Maintenance Manual RX900 S2

Contents

4.9 Closing the rack door . . . . . . . . . . . . . . . . . . . . . . 51

5 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 53

5.1 Installing a hot-plug Power Supply Unit (PSU) . . . . . . . . 54

5.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5.1.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5.1.3 Removing a dummy module (if applicable) . . . . . . . . . . . . 54

5.1.4 Installing a power supply unit . . . . . . . . . . . . . . . . . . . 55

5.1.5 Connecting the power cord . . . . . . . . . . . . . . . . . . . . 56

5.1.6 Completing the task . . . . . . . . . . . . . . . . . . . . . . . . 56

5.2 Replacing a hot-plug power supply unit . . . . . . . . . . . . 57

5.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 57

5.2.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . . 58

5.2.3 Removing the power supply unit . . . . . . . . . . . . . . . . . 58

5.2.4 Reinstalling the PSU . . . . . . . . . . . . . . . . . . . . . . . 59

5.2.5 Completing the task . . . . . . . . . . . . . . . . . . . . . . . . 59

5.3 Removing a redundant hot-plug power supply unit . . . . . 59

5.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 59

5.3.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . . 59

5.3.3 Removing the power supply unit . . . . . . . . . . . . . . . . . 60

5.3.4 Installing a dummy module . . . . . . . . . . . . . . . . . . . . 61

5.3.5 Completing the task . . . . . . . . . . . . . . . . . . . . . . . . 61

5.4 Replacing the power distribution board . . . . . . . . . . . . 62

5.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 62

5.4.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . . 62

5.4.3 Sliding the local service display outward . . . . . . . . . . . . . 63

5.4.4 Disconnecting the cables . . . . . . . . . . . . . . . . . . . . . 64

5.4.5 Removing the fan cage . . . . . . . . . . . . . . . . . . . . . . 65

5.4.6 Removing the CPUMEMR guide . . . . . . . . . . . . . . . . . 66

5.4.7 Removing the air guide . . . . . . . . . . . . . . . . . . . . . . 67

5.4.8 Removing the baseboard . . . . . . . . . . . . . . . . . . . . . 68

5.4.9 Removing the power distribution board . . . . . . . . . . . . . . 69

5.4.10 Installing the power distribution board . . . . . . . . . . . . . . 71

5.4.11 Inserting the baseboard . . . . . . . . . . . . . . . . . . . . . . 72

5.4.12 Installing the air guide . . . . . . . . . . . . . . . . . . . . . . . 73

5.4.13 Inserting the CPUMEMR guide . . . . . . . . . . . . . . . . . . 74

5.4.14 Inserting the fan cage . . . . . . . . . . . . . . . . . . . . . . . 75

5.4.15 Connecting the cables to the baseboard . . . . . . . . . . . . . 76

5.4.16 Sliding the local service display inward . . . . . . . . . . . . . . 77

RX900 S2 Upgrade and Maintenance Manual

Contents

5.4.17 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 77

6 Hard disk and solid state drives . . . . . . . . . . . . . . . . 79

6.1 Installing the HDD/SSD module . . . . . . . . . . . . . . . . 80

6.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 80

6.1.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 80

6.1.3 Removing the dummy module . . . . . . . . . . . . . . . . . . 81

6.1.4 Unlocking the HDD/SSD module . . . . . . . . . . . . . . . . 82

6.1.5 Inserting the HDD/SSD module . . . . . . . . . . . . . . . . . 83

6.1.6 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 83

6.2 Replacing the HDD/SSD module . . . . . . . . . . . . . . . 84

6.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 84

6.2.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 85

6.2.3 Unlocking the HDD/SSD module . . . . . . . . . . . . . . . . 85

6.2.4 Removing the HDD/SSD module . . . . . . . . . . . . . . . . 86

6.2.5 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 86

6.3 Removing the HDD/SSD module . . . . . . . . . . . . . . . 86

6.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 86

6.3.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 86

6.3.3 Unlocking the HDD/SSD module . . . . . . . . . . . . . . . . 87

6.3.4 Removing the HDD/SSD module . . . . . . . . . . . . . . . . 87

6.3.5 Installing the dummy module . . . . . . . . . . . . . . . . . . 88

6.3.6 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 88

6.4 Replacing the SAS backplane . . . . . . . . . . . . . . . . . 89

6.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 89

6.4.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 89

6.4.3 Sliding the local service display outward . . . . . . . . . . . . 90

6.4.4 Disconnecting the cables . . . . . . . . . . . . . . . . . . . . 91

6.4.5 Sliding the optical drive outward . . . . . . . . . . . . . . . . . 92

6.4.6 Removing the air guide . . . . . . . . . . . . . . . . . . . . . 93

6.4.7 Removing the SAS backplane . . . . . . . . . . . . . . . . . . 94

6.4.8 Installing the SAS backplane . . . . . . . . . . . . . . . . . . 94

6.4.9 Installing the air guide . . . . . . . . . . . . . . . . . . . . . . 95

6.4.10 Sliding the optical drive inward . . . . . . . . . . . . . . . . . 96

6.4.11 Connecting the cables to the baseboard . . . . . . . . . . . . 97

6.4.12 Sliding the local service display inward . . . . . . . . . . . . . 98

6.4.13 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 99

Upgrade and Maintenance Manual RX900 S2

Contents

7 Fan modules . . . . . . . . . . . . . . . . . . . . . . . . . . 101

7.1 Replacing a defective fan module . . . . . . . . . . . . . . 102

7.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 102

7.1.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 102

7.1.3 Opening the fan cover . . . . . . . . . . . . . . . . . . . . . 102

7.1.4 Replacing the defective fan module . . . . . . . . . . . . . . 103

7.1.5 Closing the fan cover . . . . . . . . . . . . . . . . . . . . . . 104

7.1.6 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 104

8 Expansion cards and BBU . . . . . . . . . . . . . . . . . . 105

8.1 Mounting expansion card slot brackets . . . . . . . . . . . 107

8.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 107

8.1.2 General instructions . . . . . . . . . . . . . . . . . . . . . . . 108

8.1.3 Network adapter D2735 . . . . . . . . . . . . . . . . . . . . . 108

8.1.4 Network adapter D2745 . . . . . . . . . . . . . . . . . . . . . 110

8.1.5 Network adapter D2755 . . . . . . . . . . . . . . . . . . . . . 112

8.2 Installing SFP+ transceiver modules . . . . . . . . . . . . . 114

8.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 114

8.2.2 Preparing the SFP+ transceiver module . . . . . . . . . . . . 115

8.2.3 Inserting the SFP+ transceiver module . . . . . . . . . . . . . 116

8.2.4 Installing the secondary SFP+ transceiver module . . . . . . . 119

8.3 Replacing SFP+ transceiver modules . . . . . . . . . . . . 120

8.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 120

8.3.2 Removing an SFP+ transceiver module . . . . . . . . . . . . 121

8.3.3 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 123

8.4 Installing a hot-plug expansion card . . . . . . . . . . . . . 124

8.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 124

8.4.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 125

8.4.3 Pulling the removal tool out of the slot . . . . . . . . . . . . . 125

8.4.4 Removing the retaining plate . . . . . . . . . . . . . . . . . . 126

8.4.5 Removing the engaging hooks . . . . . . . . . . . . . . . . . 127

8.4.6 Inserting an expansion card in the removal tool . . . . . . . . 127

8.4.7 Inserting the expansion card in the slot . . . . . . . . . . . . . 130

8.4.8 Activating the expansion card . . . . . . . . . . . . . . . . . . 131

8.4.9 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 131

8.5 Removing a hot-plug expansion card . . . . . . . . . . . . 132

8.5.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 132

Andere Handbücher für PRIMERGY RX900 S2

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu 1FINITY L100 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX600 Bedienungsanleitung

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX220 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Service-Handbuch

Fujitsu

Fujitsu HX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S8 Benutzerhandbuch

Fujitsu

Fujitsu Primergy BX900 S2 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S930 Bedienungsanleitung

Fujitsu

Fujitsu Primergy ECONEL 100 S2 Kurzanleitung

Fujitsu

Fujitsu teamserver M851i Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX4770 M2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Installationsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY ECONEL 30 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX4770 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu Primergy RX300 S3 Leitfaden

Fujitsu

Fujitsu Primergy RX100 S3 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung