Fujitsu PRIMERGY TX100 S1 Bedienungsanleitung

PRIMERGY TX100 S1

System configurator and order-information guide

Contents

Instructions

Configuration diagram

Configurator

0 System software

I Basic unit

II Processor

III Memory

IV Graphics

V Accessible drives

VI RAID Controller

VII Hard disk drives

VIII Communikation/Network

IX Miscellaneous

X Country specific power cords

Change report

PRIMERGY Server

July 2010

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Instructions

This document contains basic product and configuration information that will enable you to configure your system via

PC-/ System-Architect.

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete

PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through

the configurator by following the lines from the top to the bottom.

Section

III Memory, example

There are X memory slots which can be equipped with XXX MB.

It is permissible to make up to X passes through the memory upgrade options.

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB

X times

max. X times per system max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

Please note that there are information symbols which indicate necessary information.

For further information see:

http://ts.fujitsu.com/products/standard_servers/index.html (internet)

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

(extranet)

Prices and availability see price list and PC-/ System-Architect

Subject to change and errors excepted

Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 13

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Configuration diagram PRIMERGY TX100 S1

FRONT VIEW

SIDE VIEW

System unit ( I )

Standard

DIMM 2 - B

Power supply

DIMM 1 - B

XEON

Core2Duo

5.25" x 1.6" CD / DVD drive DIMM 2 - A or Pentium

DIMM 1 - A

5.25"x1.6"

Memory ( III ) Processor ( II )

Accessible drives (V)

Extension slots

Hard disks ( VI )

Disk Array ( VIII )

2 or 4 HDD Bays

Communication/Network ( IX )

depending on Base unit.

SATA - 3.5"x1" PCIe x4 (wired x1), notched

possible to plug x16 cards

SATA - 3.5"x1" PCIe x8

lp option available

SATA - 3.5"x1" PCIe x8 (wired x4)

SATA - 3.5"x1" PCI (3.3V) 32-Bit / 33MHz

lp option available

Key:

Included in basic unit

Option

Channel B

Channel A

Slot Number

Fujitsu Technology Solutions x86 PRIMERGY Server 3 of 13

System configurator and order-information guide

Start PRIMERGY TX100 S1

PRIMERGY TX100 S1 Status 2010-06-30

Software Configurator 32 bit

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

OEM-SW is bound to HW and

VMware-Software is not allowed to be ordered

- VCMS VirtualCenter Management Server separately.

Exception: VMware SW

For all SW products please refer to the corresponding software configurator accessible via

the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.

Linux - Software **)

- Open Enterprise Server ***)

- SuSE Linux ES (OEM): LO

- SuSE Linux ES (Support): LS

- Red Hat EL (OEM): LO

- Red Hat EL (Support): LS

Microsoft - Windows Server 2008: W

- Windows Web Server 2008

- Windows Server 2008 Standard, Enterprise

- User, Device Client Access Licenses (CAL)

- Terminal Server Client Access Licenses (CAL)

Manageability Software: V**) Details eg. version numbers are published

in the separate SW-Configurator

Backup-Software /

Application-Software: U

- ARCserve

- openSM2

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

for internal users:

for partners:

Continue with PRIMERGY

HW configurator

Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 13

System configurator and order-information guide

Start PRIMERGY TX100 S1

PRIMERGY TX100 S1 Status 2010-06-30

Software Configurator 64 bit

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

OEM-SW is bound to HW and

VMware-Software is not allowed to be ordered

- VCMS VirtualCenter Management Server separately.

For all SW products please refer to the corresponding

software configurator accessible via the Extranet under

"Configuration & Tools, -All configurations, -Software,

URL see below.

Linux - Software *) **)

Microsoft - Windows Server 2008: W only - SuSE Linux ES (OEM): LO

- Windows Web Server 2008 x86_64 - SuSE Linux ES (Support): LS

- Windows Server 2008 Standard, Enterprise - Red Hat EL (OEM): LO

- User, Device Client Access Licenses (CAL) - Red Hat EL (Support): LS

- Terminal Server Client Access Licenses (CAL)

Microsoft - Windows Small Business Server 2008: ROK

Windows Small Business Server 2008 Standard, Premium

- User, Device Client Access Licenses (CAL)

Details eg. version numbers are published

in the separate SW-Configurator

**) Pay attention to the release and ordering information in PRINCE -> Operating System

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

for internal users:

for partners:

Continue with PRIMERGY

HW configurator

Fujitsu Technology Solutions x86 PRIMERGY Server 5 of 13

System configurator and order-information guide

Start PRIMERGY TX100 S1

PRIMERGY TX100 S1 Status 2010-06-30

Section

IBasic unit

System unit consisting of:

* Housing including standard power supply (no redundancy)

* Imprint of MAC Adress on system label and delivery note as standard

Systemboard with:

* 4 PCI expansion slots:

1x PCIe x4 (wired x1), notched (posible to plug x16 cards)

1x PCIe x8; fits for lp and fh formfactor cards

1x PCIe x8 (wired x4)

1x long 32Bit / 33MHz (3.3V); fits for lp and fh formfactor cards

* 4 memory slots for up to 8GB (PC2 6400) registered DDR II RAM (ECC), max. 2GB modul per slot

* 2 bays 5.25" for accessible drives

* 2 or 4 LFF (3.5") bays 1" high for no hot plug SATA HD (depending on base unit)

* SATA with up to 4 HDD's over ICH-9R (Chipset)

* ATI ES1000 32MB

* Intel 10/100/1000 Mb/s (82566DM) on-board LAN

Cables included in Base Unit:

1. SATA cabel for CD/DVD

2. 2 or 4 x SATA cabel in basic unit (depending on base unit)

PS/2 mouse

ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

External Interfaces:

1x RS-232-C (serial, 9 pins)

1x Centronics (parallel, 25 pins, EPP/ECP compatible) optional

1x keyboard (PS/2)

1x mouse (PS/2)

1x VGA (15 pins)

10x USB 2.0 ( 2x frontside, 6x on rearside, 2x released internal USB Interfaces for backup devices)

1x LAN RJ45

Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 13

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

S26361-K1326-V101 S26361-K1326-V121

SATA basic unit Floorstand SATA basic unit Floorstand

without CPU and Memory without CPU and Memory

- Minimum one CPU / - Minimum one CPU /

Memory module has to be Memory module has to be

selected via CPU / selected via CPU /

Memory order codes Memory order codes

for up to 2 LFF (3.5") HDD for up to 4 LFF (3.5") HDD

(2 HDD cables included) (4 HDD cables included)

S26361-F3301-E5 Be aware of configuration Limits for Energy Star Configuration

Energy Star 5.0 compliance

Limits configuration in accordance

with Energy Star requirements

max. T9400, 8GB RAM, 2x SATA HDD + 2 SATA/Backup, 2x LAN

Put EPA comformity on Label only with on-board graphics ATI 32MB

Use EPA specific BIOS settings

max. 1x per system

S26361-F3436-E4

no TPM

Disable function for Trusted Platform

Use according to import restrictions

max. 1x per system

Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 13

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Section

II Processor

One of following CPU´s has to be selected

for an orderable basic unit

Dual-Core CPU`s

- 1x 64-bit Intel

Core2 Duo Exx00 (2/3MB SLC) or

Xeon UP (4/6MB SLC)

with 1066 or 1333MHz Frontside Bus

and heat pipe

occupies socket for one CPU

Pentium DC E5200 2.50GHz 2MB 800MHz FSB (65W) S26361-F3582-E520

Pentium DC E5400 2.70GHz 2MB 800MHz FSB (65W) S26361-F3582-E540

Pentium DC E6300 2.80GHz 2MB 1066MHz FSB (65W)

S26361-F3582-E630

Pentium DC E6500 2.93GHz 2MB 1066MHz FSB (65W)

S26361-F3582-E650

Core2 Duo E7400 2.80GHz 3MB 1066MHz FSB (65W) S26361-F3582-E740

Core2 Duo E7600 3.06GHz 3MB 1066MHz FSB (65W) S26361-F3582-E760

Xeon UP E3110 3.00GHz 6MB 1333MHz FSB (65W) S26361-F3503-E210

Xeon UP E3120 3.16GHz 6MB 1333MHz FSB (65W) S26361-F3503-E220

Quad-Core CPU`s

- 1x 64-bit Intel Xeon UP (6/8MB SLC = Second Level Cache on Chip )

with 1066 or 1333MHz Frontside Bus

and heat pipe

occupies socket for one CPU

Xeon UP X3220 2.40GHz 2x4MB 1066MHz FSB (95W) S26361-F3504-E220

Xeon UP X3330 2.66GHz 6MB 1333MHz FSB (95W) S26361-F3504-E330

Section

III Memory

There are 2 memory banks with 2 DIMM slots each.

Single channel memory configuration allow maximum flexibility:

Additional memory can be configured as single memory modules.

Dual channel memory configurations for maximum performance:

For optimum performance memory has to be configured in pairs of memory modules with identical size.

S26361-F3372-E413 S26361-F3372-E414

Main memory 1GB ECC

Main memory 2GB ECC

DDR2 800/PC2-6400 unbuffered DDR2 800/PC2-6400 unbuffered

consisting of one module consisting of one module

max. 4x per system

Section

IV Graphics

ATI ES1000 (32MB) on board

S26361-F2748-E533

PY VGA Card 256MB PCI-e x1

NVIDIA Quadro NVS 290 The hight end optional NVIDIA NVS290 graphic card offers dual head operation

256 MB PCIe-x1

and fully 3D video support.

2x DVI or 2x VGA or The cables for either two times DVI or VGA connections are part of the delievery.

1x DVI plus 1x VGA

cables adapters included

This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.

Dual head + fully 3-D Only one card per server is allowed.

supported for Windows OS

not supported for Linux OS (native) PY VGA card must be installed in slot 4

full height bracket

max. 1x per system

S26361-F2748-L533

PY VGA card 256MB PCI-e x1

for loose delivery

Fujitsu Technology Solutions x86 PRIMERGY Server 8 of 13

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Section

VAccessible drives

There are 2 drive bays (2x 5,25") for accessible drives.

While stock lasts a FDD may be used in Projects only.

Following USB Components are available

1) USB DVD+-RW: S26391-F7119-L100

Super Multi DVD slim drive (USB cable included)

2) FDD USB (external): S26391-F264-L226

external USB FDD (USB cable included)

3) USB Keyboard: S26381-K340-V120

KBPC PX D, professional keyboard

4) USB Mouse: S26381-K415-L100

Optical Wheel Mouse Tilt USB/PS2

5) USB Memorybird:

MyUSB P910 8GB S26391-F6047-L208

S26361-F3266-E2 S26361-F3267-E2 S26361-F3530-E2

DVD-ROM 16/48x DVD-RW 16x super multi drive Blu-ray Combo SATA

all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD

SATA

BD DL and all CD/DVD formats

incl. description (Ger/US) only W2K, W3K and Linux 1.6 x 5.25", black bezel

1.6 x 5.25", black bezel 1.6 x 5.25", black bezel

max. 1x per system

S26361-F3324-E4 S26361-F3325-E4 S26361-F3857-E4

Tape drive DDS Gen5 USB 5.25"

Tape drive DDS Gen6 USB 5.25"

RDX drive USB 5.25" internal

36GB, 3MB/s, USB 2.0 80GB, 3MB/s, USB 2.0

80-160GB, 25MB/s, USB 2.0

Connector: USB "B" Connector: USB "B" Connector: USB "B"

with USB cable kit with USB cable kit

with USB cable

incl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US)

data and cleaning cartridge data and cleaning cartridge without RDX cartridges

1.6 x 5.25", black bezel 1.6 x 5.25", black bezel 1.6 x 5.25", black bezel

max. 1x per system

RDX cartridges must be ordered separately

RDX 80GB = S26361-F3857-L80

RDX 160GB = S26361-F3857-L160

RDX 320GB = S26361-F3857-L320

Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 13

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Section

VI RAID-Controller

Section

VII Hard disk drives

There is a 6 port SATA controller in the Base Unit.

Up to 4 SATA LFF (3.5") hard disks can be configured.

S26361-F3219-E160

HD 160GB 7.2krpm 3.5"

7200rpm,<9.0 ms, 8MB Cache

SATA 3Gb/s

non hot plug

max. 4x per system

S26361-F3334-E250 S26361-F3334-E500 S26361-F3334-E750 S26361-F3334-E100

HD 250GB 7.2krpm 3.5"

HD 500GB 7.2krpm 3.5" HD 750GB 7.2krpm 3.5" HD 1000GB 7.2krpm 3.5"

4x 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache

BC-SATA 3Gb/s BC-SATA 3Gb/s BC-SATA 3Gb/s BC-SATA 3Gb/s

non hot plug non hot plug non hot plug non hot plug

max. 4x per system

Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 13

Andere Handbücher für PRIMERGY TX100 S1

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY H200 Bedienungsanleitung

Fujitsu

Fujitsu Supercomputer PRIMEHPC FX700 Montageanleitung

Fujitsu

Fujitsu PRIMERGY CX272 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY GX2570 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1310 M1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Service-Handbuch

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Service-Handbuch

Fujitsu

Fujitsu PRIMERGY Econel 100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX120 S1 Betriebsanleitung

Fujitsu

Fujitsu primequest 2400E2 Leitfaden

Fujitsu

Fujitsu PRIMERGY SX980 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Stücklistenhandbuch

Fujitsu

Fujitsu PRIMERGY 870 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX920 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER 650 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX600 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Technisches Datenblatt

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung