Fujitsu SE500 Bedienungsanleitung

Edition April 2017

English

SE700 / SE500 / SE300

Basic Operating Manual

FUJITSU Server BS2000

Valid for:

SE700 / SE500 / SE300 (basic software V6.1A and higher)

SE700B / SE500B / SE300B (basic software V6.2A and higher)

Comments…Suggestions…Corrections…

The User Documentation Department would like to know your

opinion on this manual. Your feedback helps us to optimize our

documentation to suit your individual needs.

Feel free to send us your comments by e-mail to:

manuals@ts.fujitsu.com

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system which

complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

This manual is printed

on paper treated with

chlorine-free bleach.

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source

community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in

other countries.

Novell and SUSE are registered brands of Novell, Inc. in the USA and other countries.

Linux is a registered brand of Linus Torvalds.

Windows® is a registered trademark of Microsoft Corporation.

The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit,

Server Unit x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES

directory on the relevant installation DVD.

U41858-J-Z126-2-76

Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

12. April 2017 Stand 18:58.58 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.ivz

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Documentation for the SE servers . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.2 Objective and target groups of this manual . . . . . . . . . . . . . . . . . . . . . 11

1.3 Summary of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.5 Open Source Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1 Notes from the manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1.1 For safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1.2 About this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1.3 Trademark acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.2 Note regarding radio interference suppression . . . . . . . . . . . . . . . . . . 18

2.3 Note on safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.3.1 Important alert messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.3.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2.4 Installation and operation precautions . . . . . . . . . . . . . . . . . . . . . . . 20

2.4.1 Installation precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2.4.2 Operating precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3 System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.1.1 Rack of the SE server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.1.2 Expanded maintenance and operational functions . . . . . . . . . . . . . . . . . . . 27

Contents

U41858-J-Z126-2-76

4 Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.1 Basic rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.2 Extension rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.3 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.3.1 Connection of the power cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1 Rack console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.2 Console switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.3 Control panel (on the SE700 and SE500) . . . . . . . . . . . . . . . . . . . . . . . 44

5.3.1 Function of the displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

5.3.2 Function of the keys and switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5.3.2.1 UNIT EMERGENCY switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5.3.2.2 POWER ON key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5.3.2.3 STAND-BY key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

6 Management Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6.1 Front of the MU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

6.2 Rear of the MU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7 Net Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

7.1 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

7.1.1 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

7.1.2 Network and management interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 63

7.1.3 LED indicators for ports, system and power status . . . . . . . . . . . . . . . . . . . 64

7.1.4 Threshold values for the operating temperature . . . . . . . . . . . . . . . . . . . . 67

7.2 Extension of the Net Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

7.2.1 Redundant Net Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

7.2.2 Port extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

7.2.3 HNC (High Speed Net Connect) on the SE700 / SE500 . . . . . . . . . . . . . . . . 68

Contents

U41858-J-Z126-2-76

8 Switching the server on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

8.1 Switching the SE300 on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

8.1.1 Switching off in an emergency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

8.1.2 Switching the SE server on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

8.1.3 Switching the SE server off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

8.2 Switching the SE700 / SE500 on and off . . . . . . . . . . . . . . . . . . . . . . 75

8.2.1 Switching off in an emergency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

8.2.2 Switching the SE server on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

8.2.3 Switching the SE server off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

9 Environmental protection and service . . . . . . . . . . . . . . . . . . . . . . . 83

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Contents

U41858-J-Z126-2-76

U41858-J-Z126-2-76 7

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

19. April 2017 Stand 15:41.40 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.k01

1 Introduction

The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ

servers in the server line SE servers.

Depending on requirements, the SE server contains all the system components needed for

operation as an overall application:

– SU /390 for BS2000 guest systems

– Server Unit x86 with BS2000, Linux or Windows guest systems

– Application Units x86 for operating Native or hypervisor systems (e.g. Linux, Windows,

VMware, OVM, etc.)

– Shareable tape and disk periphery

– A high-speed, server-internal infrastructure to connect the components with each other

and with the customer's IP or FC network.

The SE server is installed entirely and tested on the vendor’s premises in accordance with

customer specifications.

Many hardware components are redundant in design, thus ensuring that even if a fault

occurs with these components, operation can continue with the same performance.

You can easily upgrade the models on site.

Information on the hardware lifecycle of the FUJITSU Server BS2000 SE Series

(Changes since the last edition of the manual)

With the hardware lifecycle of the SE Series, the hardware basis for the Server Unit x86,

the Management Unit and the HNC has been renewed. These new generation versions are

called SU300 M2, MU M2 and HNC M2. They are supported from basic software V6.2A

onwards.

The FUJITSU BS2000 servers of the SE Series that are equipped with this hardware

generation are called SE300B, SE500B and SE700B.

The changes in the manuals are mainly due to these new hardware lifecycle generation

models. Any differences to the previous models regarding structure and operation are

described in detail.

Introduction

8 U41858-J-Z126-2-76

Names and abbreviations

Because the names are used frequently, for the sake of simplicity and clarity the following

abbreviations are employed:

●SE server for the FUJITSU Server BS2000 SE Series (Server Units /390 and x86) with

the following models:

●SE700 for FUJITSU Server BS2000 SE700 / SE700B

(with SU700, more than one SU300 and AU optional)

●SE500 for FUJITSU Server BS2000 SE500 / SE500B

(with SU500, more than one SU300 and AU optional)

●SE300 for FUJITSU Server BS2000 SE300 / SE300B

(with SU300, more than one SU300 and AU optional)

Based on the different models, a distinction is made between the following SUs:

●SU700 for the Server Unit of the unit type SU /390 in SE700 and SE700B

●SU500 for the Server Unit of the unit type SU /390 in SE500 and SE500B

●SU300 for the Server Unit of the unit type SU x86 in SE300, optionally in SE500 /

SE700

Both SU300 M1 and SU300 M2 are described in the operating manual.

●MU for the Management Unit. The MU enables centralized, user-friendly and cross-

system management on the SE server.

Both MU M1 and MU M2 are described in the operating manual.

●AU for the Application Unit (on a varying hardware base)

The names of the models are derived from the hardware bases. AU47 is, for example,

an Application Unit based on a PRIMERGY RX4770.

Introduction

U41858-J-Z126-2-76 9

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

19. April 2017 Stand 15:41.40 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.k01

●HNC (High Speed Net Connect)

The HNC connects the Server Unit /390 to the LAN and as the net client enables the

BS2000 systems on the SU /390 to access the Net-Storage.

Both HNC M1 and HNC M2 are described in the operating manual.

HNC is also the name used for the basic HNC software.

For a description of the further features of the SE servers SE700, SE500 and SE300,

please refer to the chapter “System overview” on page 23.

Figure 1: SE Server SE700 and SE700B

Documentation for the SE servers Introduction

10 U41858-J-Z126-2-76

1.1 Documentation for the SE servers

A wide range of documentation is available for the SE servers. As the BS2000 OSD/XC

software package comprises the BS2000 OSD/BC operating system and additional

system-related software products, the documentation for BS2000 OSD/XC consists of the

following:

●The manuals on BS2000 OSD/BC, which provide the basic literature on BS2000

OSD/XC.

●The manuals for the system-related software products which belong to the BS2000

OSD/XC software package also apply.

Any additions to the manuals are described in the Readme files for the various product

versions. These Readme files are available at http://manuals.ts.fujitsu.com under the various

products.

Current information, version and hardware dependencies and instructions for installing and

using a product version are contained in the associated Release Notice. Release Notices,

in particular those relating to BS2000 OSD/XC, M2000, X2000, and HNC, are available at

http://manuals.ts.fujitsu.com.

The documentation for the SE servers consists of the following parts:

●Operating Manual SE700 / SE500 / SE300 (consisting of a number of modules):

●Basic Operating Manual SE700 / SE500 / SE300

●Server Unit /390 (SE700 / SE500)

●Server Unit x86 (SE700 / SE500 / SE300)

●Additive Components (SE700 / SE500 / SE300)

●Operation and Administration

●Security Manual

●Quick Guide

Further literature is listed in Related publications.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu Server PRIMERGY TX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY GX2560 M7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 S1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M10-4 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY DX920 S3 Handbuch

Fujitsu

Fujitsu PRIMERGY CX2560 M4 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S2 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Technisches Handbuch

Fujitsu

Fujitsu Primergy RX100 S5 Leitfaden

Fujitsu

Fujitsu BS2000/OSD Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2400E3 Bedienungs- und Wartungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S5 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX600 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung