Fullwood M2erlin Kurzanleitung

Fullwood M²erlin

Operating Instructions for Safe Use

User Manual 294130

Revision C

ORIGINAL MANUAL

Fullwood Limited

Grange Road

Ellesmere

Shropshire

SY12 9DF

England

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 2 of 81

Contents

Fullwood M²erlin....................................................................................... 1

Operating Instructions for Safe Use....................................................... 1

Contents ................................................................................................... 2

Icons ......................................................................................................... 6

1. Health and Safety Statement........................................................ 6

1.1 Risk Assessment................................................................................................7

1.2 General...............................................................................................................7

2. Safety and Responsibility Instructions ....................................... 8

2.1 Basic Instructions...............................................................................................8

2.2 Intended Use......................................................................................................8

2.3 Improper Use......................................................................................................8

2.4 General Safety ...................................................................................................8

2.5 Safety dealing with sources of danger................................................................9

2.5.1 Electrical Safety........................................................................................................9

2.5.2 Operating fluids/materials.........................................................................................9

2.5.3 Unsuitable spare parts..............................................................................................9

2.5.4 Conversion or modification of the machine ...............................................................9

2.6 Users Responsibility.........................................................................................10

2.7 Assembly..........................................................................................................10

2.8 Positioning........................................................................................................10

2.9 Commissioning, operation and maintenance....................................................10

2.10 De-commissioning, storage and disposal.........................................................11

2.11 Danger Areas...................................................................................................11

2.12 Safety devices..................................................................................................12

2.13 Power Cut.........................................................................................................12

2.14 Technical Specifications...................................................................................13

2.15 Size of Machine................................................................................................13

2.16 Transport size...................................................................................................13

2.17 Weight..............................................................................................................13

2.18 Spatial Requirements / Size of machine...........................................................14

2.19 Power Supply Specifications............................................................................15

2.20 Ambient Temperature.......................................................................................15

2.21 Compressed Air Requirements ........................................................................15

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 3 of 81

2.22 Air Drying..........................................................................................................15

2.23 Air Filtration......................................................................................................16

2.24 Noise................................................................................................................16

2.25 Vacuum............................................................................................................16

2.26 Water................................................................................................................16

2.26.1 Cold Water..........................................................................................................17

2.26.2 Hot Water............................................................................................................17

2.26.3 Drainage .............................................................................................................17

2.27 Luminance........................................................................................................17

2.28 Consumption Figures .......................................................................................17

2.28.1 Services..............................................................................................................17

2.28.2 Chemicals...........................................................................................................17

2.29 Herd Management System...............................................................................18

3. Safety Signs and Location ......................................................... 19

3.1 Understanding safety signs..............................................................................19

3.2 Position of safety sign.......................................................................................19

3.3 Hazard Areas ...................................................................................................20

4. Site Positioning, Fixing Levelling and Assembly..................... 21

5. Handling and Transporting ........................................................ 21

5.1 The Crate .........................................................................................................21

5.2 Process Cabinet...............................................................................................23

6. Cow Compatibility with Robotic Milking ................................... 24

6.1 Udder Shape Requirements.............................................................................24

6.2 High and Low Reach........................................................................................25

7. Starting the machine for the first time....................................... 25

7.1 Preparation.......................................................................................................25

7.2 Switching off in an emergency and switching on again....................................26

7.3 Pre-Milking Start Up .........................................................................................27

7.4 Wash times and chemical usage......................................................................27

7.4.1 Setting Hot Wash Cleaning Times..........................................................................27

7.4.2 Backflush................................................................................................................28

7.4.3 Cleaning Chemicals................................................................................................28

7.4.4 Chemicals used on M²erlin (Technical Data)...........................................................29

7.4.5 Chemical ................................................................................................................29

7.4.6 Changing Chemicals...............................................................................................30

7.5 Calibrate Feeders.............................................................................................31

8. Animal Identification................................................................... 33

8.1 Ear Transponder...............................................................................................33

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 4 of 81

8.1.1 Best Cattle Tagging Practice ..................................................................................33

8.2 Pedometers......................................................................................................34

8.2.1 Removal of the Pedometer.....................................................................................34

8.2.2 Storage of Pedometers...........................................................................................34

8.3 Neck tags .........................................................................................................35

9. Introducing Animals to the New Milking System...................... 35

9.1 Preparation.......................................................................................................35

9.2 Introduction.......................................................................................................36

10. The Human Machine Interface (HMI).......................................... 36

10.1 HMI – Overview of Icons ..................................................................................36

Note; Not all the icons are visible by the user, some are for engineers

use only. ................................................................................................. 39

10.2 Milking the Cows ..............................................................................................40

10.3 Introducing new cows:......................................................................................40

10.4 Using the HMI...................................................................................................42

10.5 Milk Separation.................................................................................................48

10.5.1 Withheld and Undesirable Milk............................................................................48

10.5.2 Abnormal Milk .....................................................................................................48

10.6 Milk Cooling and storage..................................................................................48

11. Routine Daily Maintenance......................................................... 53

11.1 Changing the Liners.........................................................................................54

12. Cleaning the machine................................................................. 55

13. Service Schedule........................................................................ 56

14. Consumables / Spares................................................................ 59

14.1 Liners, Shells, Vacuum Chambers, Rope End Covers, Liner Gauge and ‘O’

Rings (Compatibility Chart).........................................................................................59

14.2 Chemicals.........................................................................................................60

14.3 Other ................................................................................................................60

15. Fault Recognition and Rectification.......................................... 61

15.1 General.............................................................................................................61

15.2 Alarm Messages...............................................................................................61

15.3 Alarm Message Codes.....................................................................................62

16. Milk Sampling.............................................................................. 77

16.1 Setting Cows for Sampling in Crystal ...............................................................77

16.2 Connecting the Multi Sampler ..........................................................................79

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 5 of 81

17. Disclaimers.................................................................................. 81

necessary, without warning. Fullwood Limited has taken every precaution to avoid errors and

omissions on the manual and equipment but does not accept any responsibility or liability for

damage of any kind arising from the use of this manual or Fullwood equipment; whether this

damage is direct or indirect. If you discover any inaccuracies please inform Fullwood Limited or

one of its agents and we will make corrections for the next release.

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 6 of 81

Revision Control

Version

Date

Pages

Writer

Checked by

03/12/2014

G Williams

Nov 2016

G Williams

March 2017

G Williams

Icons

Icons are used in this manual to draw the reader’s attention to specific information. These icons

have the following meaning:

Failure to follow the instructions can result in severe injury to engineers, users,

bystanders or livestock

Indicates special precautions that must be taken to avoid damage to equipment.

Gives important information to prevent potential problems

Gives advice or suggestions to make procedures easier or clearer

Important information - read this first

1. Health and Safety Statement

Fullwood Limited specialises in the design, procurement, manufacture, installation and

commissioning of dairy and associated equipment comprising of pneumatic, electro-pneumatic

and electrical industrial control equipment. The nature of the company’s business activity places

emphasis on experience, capability, performance of design, manufacture and reliability. Whilst

Fullwood equipment will comply with all relevant directives, customers are reminded that all

equipment into which Fullwood equipment is to be incorporated must comply with all applicable

European directives.

The attention of the purchaser is drawn to the provision of Section 6 of the Health and Safety at

Work Act 1974. Section 6 of the Act provides that manufacturers, designers, importers or

suppliers of equipment for use at work have a duty to ensure, so far as reasonably practical,

that the equipment will be safe and without risk to health when properly used. The equipment is

not regarded as being ‘properly used’ if it is used without regard to any relevant information or

advice relating to its use made available by the manufacturer, designer, importer or supplier. It

is the responsibility of the purchaser to take such steps as are necessary to ensure that

appropriate information relevant to the equipment is made available to their employees and any

person to whom the purchaser supplies them.

It is important that the equipment be installed, commissioned, maintained and used by

competent trained/skilled persons in accordance with good engineering practice. International

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 7 of 81

and national Wiring Regulations, Codes of Practice and all current relevant legislation

requirements and accepted rules or art for the industry concerned.

All installations and maintenance should be carried out within the provisions of ’The Electricity at

Work Regulations, 1989’ and by persons so qualified as defined in that act.

Fullwood Limited supplies document packs with all equipment. These documents are supplied

for information and should be disseminated to the relevant persons.

1.1 Risk Assessment

Risk Assessments are a legal obligation and an important step in protecting your personnel,

visitors as well as your business. It helps you focus on the risks that really matter in your

workplace, the ones with the potential to cause real harm. In many instances, straightforward

measures can readily reduce risks. These measures should be reviewed annually or when the

process changes, whichever comes first. The law does not expect you to eliminate all risk but

measures must be taken to reduce the risk as far as ‘reasonably practicable’.

For most, that means simple, cheap and effective measures to ensure your most valuable asset

– your workforce – is protected.

1.2 General

M²erlin is manufactured to the latest engineering standards and acknowledged safety

regulations. Nevertheless, dangers can arise through its operation;

•Danger to life and limb of the operator or third parties.

•Damages to the machine and other material assets.

Following instructions within this manual will prevent / minimise risk

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 8 of 81

2. Safety and Responsibility Instructions

2.1 Basic Instructions

•Before installing or operating the M²erlin, this manual and the appropriate operating

instructions must be read and understood.

•Only use the M²erlin if it is in a technically perfect condition and only for the purpose

it is intended; observe all safety measures and instructions.

•Immediately rectify / report any faults maintaining an efficient and safe machine.

•Wear the correct protective clothing and equipment.

2.2 Intended Use

•M²erlin is ONLY for use in dairy farming to facilitate the milking of cows; any other

use is considered incorrect. (e.g. Medical treatment of cows, milking of any other

animals).

•Operate the M²erlin only within its performance limits and under the conditions

specified in this manual.

2.3 Improper Use

•Never use the M²erlin for any other use (e.g. medical treatment of cows).

•Improper use can cause damage to property, severe injuries or even death.

•The manufacturer is not liable for any damages that may result from incorrect

use. The user alone is liable for any risks incurred.

2.4 General Safety

•All covers and guards shall be in place before operating M²erlin.

•Keep hands, feet, hair and clothing away from all moving parts.

•Keep unauthorized or untrained persons, including children away from the

hazardous area of the milking robot at all times.

•Do not enter the animal / milking area of the machine during operation.

•Do not block/obstruct the moving parts of the machine.

•Do not look directly into the laser light of the teat detection system.

•Do not weld on M²erlin unless instructed to do so by Fullwood Limited, follow

instructions e.g. remove all connections to PCB’s.

•If welding in an area within 5m of M²erlin, turn M²erlin off and remove the main

Harting connection.

•Keep the working area as clean and as dry as possible.

•Ensure first aid kits and firefighting equipment are available, are clearly visible and

easily accessible.

•Never use the equipment if you are not adequately trained or authorised to do so.

•Never attempt to service the equipment if you are not adequately trained or

authorised to do so.

•Wear PPE (Personal Protective Equipment)

e.g.:- oSafety overalls

oProtective gloves

oSafety boots

oEye protection

oEar protection

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 9 of 81

2.5 Safety dealing with sources of danger

2.5.1 Electrical Safety

•SWITCH OFF the machine and isolate the electrical power supply, release

pneumatic pressure and wait for all moving parts to stop before you perform any

maintenance on the machine.

•Contact with electrical components can result in electric shocks, burns or death.

•Only a qualified and authorized electrician or trained personnel under the supervision

of a qualified and authorised electrician shall install the electrical power supply to the

machine according to local electrical regulations.

•All power supplies shall be fitted with lockable isolating devices.

•Ensure all electrical switches are in the OFF position before the electrical power

supply is switched on.

•Replace any damaged electrical lines, conduits, switches and components

immediately.

•Only use protective devices corresponding to the machine power.

•Isolate the electrical power supply at the wall mounted isolator and lock it off before

you open the electrical panel to work on the electrical system.

2.5.2 Operating fluids/materials

The used operating fluids and material can cause adverse health effects. Suitable

measures must be taken in order to prevent injuries.

•Only Fullwood recommended chemicals shall be used, any other product may result

in damage.

•Material Safety Data Sheets (MSDS) shall be reviewed prior to use together with a

risk assessment performed in accordance with COSHH regulations.

•Read safety instructions on the containers.

•Always wear protective gloves and safety goggles when handling chemicals, or when

working on parts of the robot where you may come into contact with chemicals.

•Strictly forbid fire, open flame and smoking.

•Avoid contact with skin and eyes.

•Do not inhale oil mist or vapour.

•Do not eat or drink when handling chemicals.

•Suitable fire extinguishing materials must be to hand.

2.5.3 Unsuitable spare parts

•Unsuitable spare parts compromise the safety of the machine and could invalidate

the manufacturer’s warranty:

•Use only spare parts approved by the manufacturer for use in this machine.

2.5.4 Conversion or modification of the machine

Modifications, additions to and conversions of the machine or the controller can result

in unpredictable dangers.

•Obtain written approval by the manufacturer prior to any technical modification or

expansion of the machine, the controller, or the control programs.

Ref / Pt.No

: 294130 Operating Instructions for Safe Use

Fullwood M²erlin

Revision: C

Date

: 24-Mar-17

294130 Page 10 of 81

2.6 Users Responsibility

•Check suitability of animals (e.g. low udders, misplaced teats, temperament)

•Check services are adequate (Power, Vacuum, Compressed Air, Water)

•Check calibration of Milk Meters and feed dispensers

•Check for hazards such as sharp objects that could cause injury to the animals.

•Check the performance of the animals during milking

•Follow manufacturers guidelines for cleaning and maintenance

•Servicing of M²erlin shall be carried out by approved dealers

•Never allow persons under the influence of drugs or alcohol operate M²erlin

•Following these instructions along with others within this and other supporting

manuals will help maintain an efficient operating milking machine.

•The manufacturers guarantee does not cover direct or consequential damage

caused by incorrect installation, incorrect usage, improper treatment, inadequate

cleaning or servicing, or incorrect software parameter inputs or hardware settings.

2.7 Assembly

•Do not climb onto the machine to gain access to upper areas.

•When working at height assess the risk and use appropriate equipment.

•Only use electrical cables that are suitable and approved for the surroundings and

electrical loads applied.

•Never dismantle compressed air pipes until they are fully vented.

•Only use pressure lines that are suitable and approved for the maximum working

pressure and intended medium.

•Do not allow connection pipes to be placed under mechanical stress.

•Do not induce any forces into the machine via the connections, so that the

compressive forces must be balanced by bracing.

2.8 Positioning

A suitable installation location for the machine prevents malfunction and accidents.

•Install the machine in accordance with Fullwood plans.

•Ensure sufficient lighting such that the display can be read and work can be carried

out comfortably and safely.

•Ensure accessibility so that all work can be carried out without danger.

2.9 Commissioning, operation and maintenance

During commission, operation and maintenance you may be exposed to dangers

resulting from; electricity, pressure and temperature. Careless actions can cause

accidents with severe adverse effects for your health.

•Allow maintenance work to be carried out only by authorised personnel.

•Switch off and lock out the power supply isolating device and verify the absence of

voltage.

•Close shut-off valves or otherwise isolate the machine from the compressed air

network to ensure that no compressed air can flow back into the machine.

•Do not open the electrical cabinet while the machine is turned on.

•Carry out regular inspections;

•for visible damages.

•of safety installations, guards etc.

Inhaltsverzeichnis

Andere Fullwood Landwirtschaftliche Geräte Handbücher

Fullwood

Fullwood Revolution II Stage 3 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung