Funkwerk EGO FLASH Bedienungsanleitung
Operating Manual
129 8001 1.00
US
English
EGO FLASH
Funkwerk Dabendorf reserves the right to modifi cations in the course of technological progress and deviations from the
delivery scope! All rights reserved! Reproduction, in whole or in part, is only permitted with the prior written consent of
Funkwerk Dabendorf GmbH!
List of contents
1 LIST OF CONTENTS 3
2 LIST OF ILLUSTRATIONS 6
3 INTRODUCTION / FOREWORD 7
4 SAFETY NOTES 8
5 SCOPE OF DELIVERY/PACKAGE CONTENTS 9
6 INSTALLATION INSTRUCTIONS 10
6.1 Required configuration 10
6.1.1 Vehicle 10
6.1.2 Mobile phone 10
6.1.3 Muting (radio mute switch) 10
6.1.4 Convertingting the EGO FLASH into an already-installed Funkwerk hands-free car kit 10
6.1.5 Add-on speakers / Car audio telephone connection 11
6.1.6 Car audio line-in 11
6.2 Installation locations 11
6.2.1 Checking cable lengths 11
6.2.2 Selection of site for installing the electronics box 11
6.2.3 Selection of site for installing the microphone 12
6.2.4 Selection of site for installing the control unit with integrated display 13
6.3 Installation 13
6.3.1 Mounting the electronics box 13
6.3.2 Mounting the microphone 14
6.3.3 Mounting the control unit with integrated display 14
6.4 Connection scheme 15
6.5 Installation of the ISO connecting cable 17
6.5.1 Checking the mute inputs 17
1
2 |3
6.5.2 Checking the installation 19
6.5.3 Additional external speakers 19
6.6 Connecting the components to the electronics box 20
7 OPERATING INSTRUCTIONS 22
7.1 Features 22
7.1.1 Overview of features 22
7.2 Symbols 23
7.2.1 Key functions 23
7.2.2 Symbols in the status bar 24
7.2.3 Speller symbols 24
7.2.4 Symbols for menu options 25
7.3 Speller 25
7.4 Getting started 26
7.4.1 About Bluetooth®technology 26
7.4.2 On / Off function 27
7.4.3 Enter Bluetooth®PIN 27
7.4.4 Hands-free mode 27
7.4.5 Automatic coupling 28
7.5 The menus 28
7.5.1 User management 31
7.5.2 Call 32
7.5.3 Contacts list 36
7.5.4 Call lists 37
7.5.5 Voicemail 37
7.5.6 SMS 38
7.5.7 Music player 38
7.5.8 Dictation function 39
7.5.9 Settings 40
7.5.10 Voice control 43
EGO FLASH
8 SOFTWARE UPDATE 49
9 SERVICE 50
10 SPARE PARTS AND ACCESSORIES 52
11 TECHNICAL DATA 54
12 CERTIFICATION 54
13 CONFORMITY STATEMENT 55
14 HOTLINE 57
4 |5
EGO FLASH
List of illustrations
Fig. 01 Scope of delivery 9
Fig. 02 Signal orientation of Bluetooth®antenna 11
Fig. 03 Installation location for electronics box 12
Fig. 04 Installation location for microphone 12
Fig. 05 Installation dimensions of electronics box 13
Fig. 06 Connecting the Mini-ISO-connector 16
Fig. 07 Installation procedure 17
Fig. 08 Type-dependent pin allocation 18
Fig. 09 Plug wiring scheme 18
Fig. 10 Connection system 18
Fig. 11 a/b Changing power supply wiring 19
Fig. 12 Connecting external loudspeakers 20
Fig. 13 Connecting the electronics box 21
Fig. 14 Status bar 24
2
Introduction / foreword
Congratulations on your new EGO!
Whether you’re browsing through your contacts list, reading SMS messages or selecting music for playback – EGO
FLASH is a practical all-rounder with a razor-sharp OLED display and intuitive controls. Its handy size and sleek design
make it a must-have accessory for your car.
The installation of your EGO FLASH in your car requires specialized knowledge and skills. We therefore recommend that
the installation be performed by a qualified professional.
Before installation in your car, please make sure that your mobile phone is fully compatible with EGO FLASH. If you are
uncertain, please consult your dealer or a qualified workshop. Our service team will also be happy to help you with any
information you may require. Further information on compatibility between EGO FLASH and various mobile phones can
be found on our website.
3
6 |7
Safety notes
1. Incorrect installation – Incorrect installation may lead to damage to the units and/or your car! Specialized knowledge
and skills are required for installing the system. We strongly recommend that the system be installed by a qualified
professional.
2. Risk of injury – Unsuitable installation locations may become a source of injury in an accident situation, or may inhibit the
correct functioning of essential safety equipment. Please carefully read the notes in the „Installation“ chapter carefully!
3. Risk of injury/material damage – the removal of vehicle lining with sharp or pointed objects may lead to injuries or
material damage.
4. Road safety risk – Diverted attention can lead to dangerous situations in traffic. Even when using hands-free phone
systems, your complete attention must be paid to the current traffic conditions. It is always advisable to avoid
phone calls while driving in difficult traffic situations!
5. Damage to airbags – An incorrect installation location may cause damage to, or inhibit the correct function of, your
airbags. Do not install the components within the deployment area of the airbags!
6. Insulation damage – Damaged insulation can lead to equipment and wiring damage. The cables and leads may not be
under tension when installed. Install the cables and leads in such a way as to avoid pinching or abrasion.
7. Polarity and shorting damage – Cables connected with reversed polarity, or in such a way as to produce a short
circuit, can lead to serious damage to your equipment. Before commencing installation, make sure that the car
battery is disconnected.
8. Damage to essential vehicle components – Essential vehicle components or wiring can be damaged when drilling
mounting holes or screwing in self-threading screws. Please make sure there is always sufficient space behind the
screw holes and drilled holes!
9. Interference with on-board electronics – Despite the extreme protection against interference, incorrect installation can
lead to interference with the vehicle electronic systems. Please read the vehicle manufacturer’s notes to this effect!
10. Appropriate use – The EGO FLASH is intended exclusively for use in vehicles with Bluetooth®mobile phones and A2DP
devices.
11. Damage caused by inappropriate replacement parts – Inappropriate spare or replacement parts may lead to
malfunctions. Please use only the approved parts listed in the section „Spares parts and accessories“!
12. Road safety risk – For your own safety, never initiate the coupling procedure while your vehicle is in motion!
4
EGO FLASH
Scope of delivery / package content
[1] Electronics box
[2] Control unit with integrated OLED display
[3] Microphone
[4] ISO-cable for connection to the car electrical system
[5] Self-adhesive pad
[6] Quick Guide
[7] Safety manual
PLEASE MAKE SURE THE CONTENT OF THE PACKAGE is complete. If any parts are missing, please don‘t hesitate to
contact our service hotline team: +49 (0) 3377 - 316 233, Mon.–Thurs 7.00 a.m.–5.00 p.m., Fri. 7.00 a.m.–4.00 p.m.
5
q
8 |9
[1]
[2] [3]
FWD
Phone book
Safety Instructions
1. Improper installation–Improper insta llation may cause damages to the unit or to the v
abilities. We therefore strongly recommend to have the installation one by a professional.
2. Personal
injury –Inappropriate places for the installation may cause personal injuries in
“Instal lation”!
3. Personal
injury / Material damage –When you remove coverings or armatu re parts, sha
D
on’t submit the connecting cables to pressure.
4. Negative
eects on road safety – Ta lk ing wh il t d i
[6]
[7]
QUICK
GUIDE
EGO FLASH
129 8011 1.02
[4]
Fig. 01:
Scope of Delivery
[5]
Installation guide
6.1 Determination of required configuration
Before installation of your EGO FLASH, please note which features and connection options are provided by your car audio
system. It is advantageous when your audio has the following: a muting function, phone input and line-in. You can find out
which of these input options your audio system has in the documentation provided.
6.1.1 Vehicle
The EGO FLASH may only be installed in vehicles with 12 V, with the negative terminal connected to the chassis. If no car
audio is installed, an add-on speaker will be required. For the installation of the optional charging cradle, you will require a
model-specific mounting that may be purchased from a specialist dealer
6.1.2 Mobile Telephone
Operation of the EGO FLASH requires a Bluetooth®-compatible mobile phone. You can find a list of supported Bluetooth®
telephones online at www.fwd-online.de.
6.1.3 Muting (radio muting)
The muting function (Radio Muting) ensures that the audio sound is turned off during telephone calls. The system
supports the muting function. Your car`s audio documentation will show whether your car audio has a mute option. If your
car audio is not equipped with a muting option, you can install the optionally available Stereo Mute Box to facilitate speaker
muting.
6.1.4 Converting the EGO FLASH into an already-installed Funkwerk hands-free car kit
An adapter cable is available for customers who already own a Funkwerk hands-free car kit (including the Audio 2000,
3000, Audio blue, Audio com, and Audio compact) and who would like to easily convert the EGO FLASH. The adapter cable
connects the EGO FLASH with the ISO cable already installed in your car with your Funkwerk hands-free car kit.
NOTE! This simple converting option is only possible when installing the EGO FLASH without a stereo mute box. To install the
EGO FLASH with the stereo mute box, the stereo mute box’s ISO connecting cable should be used to connect to the vehicle.
6
EGO FLASH
q
Andere Handbücher für EGO FLASH
1
Inhaltsverzeichnis
Andere Funkwerk Autozubehör Handbücher
Funkwerk
Funkwerk EGO LOOK Bedienungsanleitung
Funkwerk
Funkwerk EGO FLASH Bedienungsanleitung
Funkwerk
Funkwerk EGO TALK Bedienungsanleitung
Funkwerk
Funkwerk AUDIO 2010 Bedienungsanleitung
Funkwerk
Funkwerk EGO Cup FM Bedienungsanleitung
Funkwerk
Funkwerk Bluetooth QD ID B013281 Bedienungsanleitung
Funkwerk
Funkwerk Bluetooth QD ID B013281 Bedienungsanleitung
Funkwerk
Funkwerk Audioblue Stücklistenhandbuch
Funkwerk
Funkwerk AUDIO 2010 Bedienungsanleitung
Funkwerk
Funkwerk EGO TALK Bedienungsanleitung
