Funtronic EasyBoard Bedienungsanleitung

EasyBoard

Polish Interactive Whiteboard

manual 2.0

www.etablica.eu

funtronic sp. z o.o.

Thank You for choosing the Polish Interactive Whiteboard,

designed and produced in Poland.

Thank You for supporting Polish electronic industry.

IMP RTANT SECURITY RULES

•Please, read this manual thoroughly in order to use this product effectively,

•Should you need any servicing help, contact the Funtronic company service centre,

•The Funtronic company is not responsible for any lost benefits or losses caused by the product

inefficiency,

•ll brand names and names of products appearing in this manual are registered trademarks and

belong to their owners,

•Technical data given in this manual can be changed without previous warning.

DANGER

•Do not try to modify this device in any way. You may cause fire, injury, electrical shock or serious

damage of this device. ll testing and servicing can be done only by the Funtronic company

service centre.

WARNING

•Use batteries only of the type which fulfils technical requirements of this device. Do not connect

cables in a forbidden way, do not heat or burn batteries. Do not install batteries with incorrect

polarity.

•The product cannot be placed close to a source of fire or direct sunlight. void electrical

discharge and short-circuits, they may damage this device.

•Be careful and do not look for a longer period of time straight into the lens, the pen and projector

light attached to the product (very important for children).

•While attaching the camera to a computer with a USB cable make it sure the cable will not be

pulled out accidentally (for example during walking by). It is suggested to use an original USB

cable delivered with the board.

•The most convenient attaching the camera is directly and permanently on the projector, making it

impossible to move accidentally.

worn out device should not be thrown away, it should be returned to the producer or a

utilization company .

funtronic sp. z o.o.

List of content

1 General information................................................................................4

1.1 Product description...........................................................................4

1.2 What is in the box?............................................................................5

1.3 System requirements.........................................................................5

1.4 Classroom ......................................................................................5

2 How to install?.......................................................................................6

2.1 Installation in the fixed mode...............................................................7

2.2 Installation in the portable mode..........................................................9

2.3 The software installation...................................................................10

2.3.1 Windows....................................................................................10

2.3.2 MacOS.......................................................................................10

2.3.3 Linux.........................................................................................11

2.4 Remarks for installator.....................................................................12

2.5 F Q.............................................................................................15

3 Starting up..........................................................................................16

3.1 The EduTool software.......................................................................17

3.1.1 The EduTool application.................................................................17

3.1.2 The EduTool graphical panel............................................................20

3.2 Positioning and the first camera calibration............................................24

3.3 Electronic pen operation...................................................................26

3.4 F Q.............................................................................................26

4 Maintenance instruction..........................................................................28

4.1 Battery replacing............................................................................28

5 F Q..................................................................................................29

6 Technical specification...........................................................................30

funtronic sp. z o.o.

1 General information

1.1 Product description

The Polish Interactive Whiteboard is designed with the thought of every school.

It offers high quality, possibility of fast writing, reliability and a good price. It gives two

modes of operation: a mouse mode to navigate applications like a multibook and a

graphic mode.

The Polish Interactive Whiteboard enables writing with the electronic pen on

every, non-reflective surface on which a picture from the projector is presented. The

surface can be: a non-reflective whiteboard, a screen or a wall. The camera attached to

the projector watches the movement of the electronic pen and sends the information to

the computer through the USB cable.

The software which steers the board enables the work of the electronic pen in a

mouse mode. The enclosed free graphical software has many functions useful while

conducting a presentation or a lesson: writing, marking, erasing, drawing, enlarging

(zoom), etc. There is also a possibility of storing the screen and printing it. The software

works transparently and allows to navigate any programme or a desktop of a computer .

The usage of an electronic pen is very similar to a one-button mouse and it

operates intuitionally. n ergonomic construction and the only one button makes the

pen a very friendly tool for everyone – whatever the age and skills. The Polish

Interactive Whiteboard offers high resolution, short time of reaction and proper

sensitivity .

More information available on: www.etablica.eu.

funtronic sp. z o.o.

1.2 What is in the box?

Set content:

•1 optical module,

•2 electronic pens with batteries,

•1 CD with manual,

•1 USB cable (5 m),

•1 installation kit (anti-slip pad),

•printed version of short manual and warranty document.

Optional:

•telescopic e-pointer with batteries

1.3 System requirements

For proper interactive whiteboard operation there is a need for PC with Windows

XP/Vista/7, Linux or MacOS operation system, USB port and CD drive (for SW

installation).

1.4 Classroom

Classroom, where interactive whiteboard is going to be used, must have dark and

impervious curtains or roller blinds (i.e. not letting sunlight going through), allowing full

overshadowing in case of sunny day.

funtronic sp. z o.o.

2 How to install?

The Polish Interactive Whiteboard is designed for the installation done by the

users. ll details are presented in the User Manual available on the enclosed CD. The

user may find more information on the www.etablica.eu .

The Polish Interactive Whiteboard can be installed without any help of the

producer. To make it properly the user should follow the steps :

STEP 1: the optical camera installation

STEP 2: the software installation

POLISH INTERACTIVE WHITEBOARD INSTALLATION

NOTE: ZOOM in the projector should be set to minimum.

funtronic sp. z o.o.

2.1 Installation in the fixed mode

To install the camera properly, the user should follow the steps :

STEP 1: Choose the right place for the camera – above or in front of the

projector intended to be connected with the camera .

STEP 2: Install the metal angle and screw it to the projector hanger in a way

to be as close as possible to the axis of the projector lens.

STEP 3: Put the camera on the metal angle so both camera and projector

look in the same direction. The camera can be installed on the

projector in any, however stable way i.e. disabling any

unwanted movement. It can be done with double sided tape,

anti-slip pad or metal clamp.

Suggested way of installing the camera Not suggested way of

installing the camera

ATTENTION:

1. If the ceiling is the place for installing the camera (projector , it should be placed

upside-down (the bottom of the camera facing oriented to the ceiling just like the

projector .

2. If the screen is the one with the backside projection, the camera can be placed

behind the screen, together with the projector.

3. In case of portable operation, put the camera directly on the projector (on the

enclosed anti-slip pad as close as possible to the axis of the projector lens.

funtronic sp. z o.o.

STEP 4: Connect the camera and the computer with the enclosed USB cable.

The camera is fed straight from the computer via the USB port.

ATTENTION:

1. The maximum length of the USB cable which allows the camera to operate correctly

is 10m. If the distance between the camera and the computer is farther, the USB

cable with an amplifier should be used. Additional cables can be ordered from the

producer’s or bought in any shop with computers’ accessories.

2. The camera can be connected with the computer all the time .

3. The camera should be placed near or directly to the projector on its top surface.

Such placement of the camera allows the user to expose intuitionally the areas

pointed with the electronic pen.

The pen might be overshadowed instead

of full visibility of a picture.

Full (correct) visibility of the pen

5. The distance from the screen should be twice farther than the width of the screen,

however, not bigger than 5m. If the distance is farther, the board cannot be

operated correctly. If the sunlight is very bright, the usage of curtains or roller

blinds is suggested.

The exemplary distances from the screen

The width of the screen The distance from the screen

1 m 2 m

1,5 m 3 m

2 m 4 m

2,5 m 5 m

funtronic sp. z o.o.

2.2 Installation in the portable mode

To run interactive whiteboard, the user should follow the steps :

STEP 1: Stick the anti-slip pad on the projector

STEP 2: Put the camera directly on the anti-slip pad parallel to the axis of

the projector lens so it looks into the same direction as the

projector.

STEP 3: Connect the camera and the computer with the enclosed USB cable.

The camera is fed straight from the computer via the USB port.

funtronic sp. z o.o.

2.3 The software installation

The latest SW version is always available for free download at www.etablica.eu.

2.3.1 Windows

The person who is going to install the EduTool software should have the

administrator rights of operating system in the computer.

To install the EduTool software the user should put the enclosed CD to the drive,

double click on the icon of the installation programme EduTool_Installation.exe and

next follow the commands shown on the screen. Installation software can been located

in the following catalog: EduTool_software_for_business/WINDOWS/

The process of the EduTool software installation runs automatically. fter having

been installed, the EduTool software will be available from the menu ST RT. To make

the usage more convenient, the shortcut for the EduTool application will be placed on

the computer desktop.

The EduTool software can be removed at any time with available de-installer.

2.3.2 Mac S

The person who is going to install the EduTool software should have the

administrator rights of MacOS operating system in the computer.

To install the EduTool software the user should put the enclosed CD to the drive,

mount in the system (double click) the image file EduTool-1.0.dmg and next move the

icon “EduTool” to “ pplications” folder and run (double click) driver FTDI

FTDIUSBSerialDriver.mpkg installation software. Installation software can been located

in the following catalog: EduTool_software_for_business/MacOsX/

The process of the EduTool software installation runs automatically. fter having

been installed, the EduTool software will be available from the menu “ pplications”.

funtronic sp. z o.o.

Inhaltsverzeichnis

Beliebte Whiteboard Handbücher anderer Marken

Copernicus

Copernicus RC105 Bedienungsanleitung

IKEA

IKEA MALA 104.889.67 Bedienungsanleitung

SMART

SMART SBX800 Bedienungsanleitung

SMART

SMART Board MX V3 Series Bedienungsanleitung

Best-Rite

Best-Rite Baby Folding Wheasel 784-T Bedienungsanleitung

Best-Rite

Best-Rite Modular Room Divider Bedienungsanleitung

IKEA

IKEA MALA 504.565.92 Bedienungsanleitung

Panasonic

Panasonic TX-47P800HQ TX-47P800HZ Bedienungsanleitung

SMART

SMART ST442i Bedienungsanleitung

Quartet

Quartet QRT-72981 Bedienungsanleitung

SMART

SMART Smart Board 480 Bedienungsanleitung

EGAN

EGAN GlassWrite TableScreen TSG Bedienungsanleitung

Claridge

Claridge Edify Mobile Bedienungsanleitung

Legamaster

Legamaster e-Board Touch 2 Bedienungsanleitung

Nureva

Nureva WALL Bedienungsanleitung

Best-Rite

Best-Rite Black Splash Bedienungsanleitung

Da-Lite

Da-Lite Cosmopolitan Electrol Bedienungsanleitung

Steelcase

Steelcase H. System Bedienungsanleitung

funtronic EasyBoard Bedienungsanleitung

Beliebte Whiteboard Handbücher anderer Marken