Furuno 1834C Handbuch
VX2
MODEL 1824C/1834C/1934C/
1944C/1954C-BB GD-1920C-BB
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
Trackball
Shifts EBL/VRM and cursor;
selects menu items and options.
Displays the mode selection window.
Soft keys
Momentary press:
Registers own ship's position as a waypoint.
Press three seconds:
Marks man overboard position.
Opens/closes the main menu.
Radar: Displays the soft keys
for adjustment of gain, A/C SEA,
A/C RAIN.
Sounder: Adjusts gain.
Press three seconds: Turns power off.
Momentary press: Turns the power on, and
shows D: RADAR STBY/TX soft key.
ENTER knob
Push: Registers setting.
Rotate: Adjusts gain, VRM, EBL, etc.;
selects menu items and options.May also
be used to enter alphanumeric data.
Clears data; erases selected mark.
Opens/closes the alarm menu.
Shows or hides the soft
keys, function keys,
nav data.
Selects a range. Enter alphanumeric
data.
Displays soft keys for EBL/VRM.
PUSH TO ENTERPUSH TO ENTER
DEFDEF
MNOMNO
VWXVWX
_'#_'#
POWERPOWER
RANGERANGE
TXTX
00
JKLJKL
44
77
STUSTU
55
88
ABCABC 2211
BB
GAINGAIN
ALARMALARM
EBLEBL
VRMVRM
PQRPQR
YZ&YZ&
66
99
DISPDISP
EE
MENUMENU
CC
DD
CLEARCLEAR
GHIGHI
33
SAVESAVE
MOBMOB HIDEHIDE
SHOWSHOW
AA
Turning the Power On/Off
Turning on the power
Press the POWER/TX key momentary.
Turning off the power
Press and hold down the POWER/TX key
until the screen goes off (approx. 3 sec.)
Selecting a Display
1. Press the DISP key to show the display
selection window.
2. Rotate the ENTER knob to select a basic
display screen, and then push it.
3. Rotate the ENTER knob to select a
combination display.
4. Push the ENTER knob.
2
<RADAR Operation>
Transmitting, Stand-by
1. Press the POWER/TX key momentarily
to sow soft keys.
2. Press the D:RADAR STBY soft key to
highlight TX on its label.
3. Press the E: RETURN soft key.
To return to Stand-by mode, press the D:
RADAR TX soft key to highlight STBY on its
label.
Selecting the Range Scale
Press the RANGE (+ or -) key to change the
range scale.
Adjusting the Gain
1. Press the GAIN key.
2. Press the A: GAIN soft key to show the
gain sensitivity setting window.
GAIN SENSITIVITY
¤
AUTO ROUGH
¡
AUTO MODERATE
¡
AUTO CALM
¡
MAN
0
3. Use the trackball to select AUTO
ROUGH, AUTO MODERATE, AUTO
CALM or MAN (manual) as appropriate.
For manual adjustment, rotate the
ENTER knob to adjust, while observing
the radar echo.
4. Press the GAIN key or the E: RETURN
soft key to finish.
Adjusting the A/C SEA, RAIN
1. Press the GAIN key followed by B: A/C
SEAor C: A/C RAIN soft key to show the
appropriate setting window.
A/C SEA
0
A/C RAIN
0
A/C SEA window A/C RAIN window
AUTO ROUGH
AUTO MODERATE
AUTO CALM
MAN
2. For A/C SEA, rotate the ENTER knob to
select the appropriate setting. When
selecting MAN, rotate the ENTER knob
to adjust.
3. For A/C RAIN, rotate the ENTER knob to
adjust.
4. Press the GAIN key or E: RETURN soft
key to finish.
Measuring Range by VRM
1. Press the EBL/VRM key followed by B:
VRM1 ON (dotted ring) or E: VRM2 ON
(dashed ring) soft key to show
appropriate VRM.
2. Rotate the ENTER knob to place the
VRM on the inside edge of a radar target,
and read the VRM indication to find
range.
To erase a VRM, press appropriate VRM soft
key (B or E) followed by the CLEAR key.
Measuring the Bearing
1. Press the EBL/VRM key followed by A:
EBL 1 ON (dotted line) or D: EBL 2 ON
(dashed line) soft key to show the
appropriate EBL.
2. Rotate the ENTER knob to bisect the
radar target with the EBL, and read the
EBL indication to find bearing.
To erase an EBL, press appropriate EBL soft
key (A or D) followed by the CLEAR key.
EBL
VRM
EBL1
ON
359.9 ˚R
11.70
nm
+
VRM1
(Dotted)
VRM2
(Dashed)
EBL1 bearing/
VRM1 range Active marker is highlighted.
OFFSET
EBL2
ON
VRM1
ON
VRM2
ON
EBL1
330.1°R
VRM1
3.123nm
EBL2
234.1°R
VRM2
9.343nm
EBL2 bearing/
VRM2 range
319. 9°
M
12/
H-UP
3nm
LP
EBL1
(Dotted)
EBL2
(Dashed)
A
B
C
D
E
3
<PLOTTER Operation>
Changing Chart Scale
Press the RANGE - key (shrinks the scale,
and expands image) or RANGE + key
(expands the scale, and shrinks image).
Entering a Mark
1. Place the cursor where you want a mark
appear.
2. Press the A: MARK ENTRY soft key.
Entering a Waypoint at Own
Ship Position
Press the SAVE/MOB key momentarily to
store your position as a waypoint.
Entering a Waypoint with
Cursor
1. Press the MENU key, C:
WAYPOINTS/ROUTES, A: WAYPOINTS
and C: WAYPOINT BY CURSOR soft
keys in order to show the plotter display.
2. Operate the trackball to place the cursor
where you want to enter a waypoint.
3. Press the D: NEW WAYPOINT soft key.
NEW
WPT
SELECT
MARK
COORD
TYPE
N< - - >S
E< - - >W
SAVE
RETURN
▲
34°44.000'N
135°21.000'W 359.9°
0.00nm
002WPT
00:00 01JAN00
34°44.000'N
135°21.000'W 359.9°
0.00nm
003WPT
00:00 01JAN00
34°44.000'N
135°21.000'W 359.9°
0.00nm
COMMENT
02:36 01JAN01
LAT
34°12. 134'N
LON
134°12. 345'W
PROXIMITY ALARM RADIUS
0. 00nm
MARK
001WPT
NAME
A
B
C
D
E
4. Press the D: SAVE soft key.
Creating a Route
1. Press the MENU key, C:
WAYPOINTS/ROUTES, B: ROUTES soft
keys in order to show the ROUTE menu.
2. Press the B: NEW ROUTE soft key to
open the new route entry screen.
NEW
ROUTE
PLOT
LOCAL
LIST
ALPHA
LIST
CONECT
CANCEL
ROUTE NAME
COMMENT
00 1
A
B
C
D
E
3. Press the B: LOCAL LIST or C: ALPHA
LIST soft key to open the waypoint list.
4. Use the trackball to select a waypoint,
then press the A:ADD WPT soft key.
5. Repeat step 4 to complete the route.
6. Press the D: SAVE soft key to register
the route, and then press the MENU key.
Navigating to Waypoints
1. Operate the trackball to select a
waypoint on the plotter display.
2. Press the D: GO TO WPT soft key.
Setting Arrival Alarm
1. Press the ALARM key.
2. Select ARRIVALALARM.
3. Press the A: EDIT soft key to show the
arrival alarm window.
ARRIVAL ALARM
▲
¡
ON 0.010nm
¤
OFF
▼
4. Use the trackball to select ON.
5. Enter alarm range, and then press the C:
ENTER soft key or ENTER knob to
register setting.
6. Press the ALARM key to finish.
4
<SOUNDER Operation>
Color bar
Variable Range Marker
(White) Depth scale
Tx frequency
Depth
50
30
Temp.
scale
Water
temp.
graph
Water
temp.
display
50.0
°
F
Minute marker
Icons
(alarm,
battery,
simulation)
Bottom echo
Zero line
Fish
echo
LF
40
0
50
100
150
200
120
Cross-hair
cursor
0'30"
Time
S
I
M
Selecting a sounder mode
1. Press the D: DISPLAY MODE soft key to
show the display mode window.
2. Use the trackball or ENTER knob to
select a display.
3. Press the E: RETURN soft key to close
the window.
Automatic Sounder Operation
1. Press the B: AUTO/D.BOX soft key.
2. Use the trackball or ENTER knob to
select CRUISING or FISHING.
3. Press the E: RETURN soft key.
Manual Sounder Operation
1. Press the B: AUTO/D.BOX soft key.
2. Select OFF (MANUAL), and then press
the E: RETURN soft key.
Adjusting the gain
Press the GAIN key, and then adjust the
ENTER knob or trackball.
Shifting the basic range
Press the A: SHIFT soft key, and then adjust
the ENTER knob.
Reducing Low Level Noise
1. Press the MENU key, and then press the
A: SOUNDER MENU soft key.
2. Select CLUTTER, then press the A: EDIT
soft key to show the clutter window.
3. Adjust the trackball upward or
downward.
4. Press the E: RETURN soft key followed
by the MENU key to close the menu.
Picture Advance Speed
1. Press the MENU key and A: SOUNDER
MENU soft key in order.
2. Select PICTURE ADVANCE, and then
press the A: EDIT soft key to open the
picture advance window.
3. Use the trackball to select speed
desired.
4. Press the E: RETURN soft key followed
by the MENU key to close the menu.
Activating Sounder Alarms
1. Press the ALARM key to show the
ALARM menu.
2. Use the trackball to select the alarm
among BOTTOM, TEMPERATURE,
FISH and FISH (B/L).
3. Press the A: EDIT soft key.
4. Select ON (for TEMPERATURE, WITHIN
RANGE or OUT OF RANGE), and then
key in the alarm range.
5. Press the C: ENTER soft key (or ENTER
key) followed by the ALARM key to close
the menu.
This manual is printed with
soy ink.
PUB.NO.OSE-35490-A
(0502,HIMA) MODEL 1824C-BB SERIES
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere Furuno Marine-GPS-System Handbücher
Furuno
Furuno GD-1700C Bedienungsanleitung
Furuno
Furuno DCU12 Bedienungsanleitung
Furuno
Furuno GP-7000F Bedienungsanleitung
Furuno
Furuno Navpilot 500 Bedienungsanleitung
Furuno
Furuno GP-7000F Bedienungsanleitung
Furuno
Furuno GP-150 Bedienungsanleitung
Furuno
Furuno GP-1650W Bedienungsanleitung
Furuno
Furuno GP-3500F Bedienungsanleitung
Furuno
Furuno GP-1810F Bedienungsanleitung
Furuno
Furuno 2100 Technisches Handbuch
Furuno
Furuno GP-1600F Handbuch
Furuno
Furuno 1734C Bedienungsanleitung
Furuno
Furuno GP-1800 Bedienungsanleitung
Furuno
Furuno GP-1670F Bedienungsanleitung
Furuno
Furuno GD-3300 Bedienungsanleitung
Furuno
Furuno FELCOM 250 Bedienungsanleitung
Furuno
Furuno SC-30 Betriebsanleitung
Furuno
Furuno ECDIS FEA-2100 Technisches Handbuch
Furuno
Furuno GP-1850 Series Bedienungsanleitung
Furuno
Furuno GP-50 Bedienungsanleitung
Beliebte Marine-GPS-System Handbücher anderer Marken
Thuraya
Thuraya ATLAS IP+ Bedienungsanleitung
Radio Zeeland DMP
Radio Zeeland DMP Sigma 120 Bedienungsanleitung
METRACKCO
METRACKCO SVT600/T1/T3 Bedienungsanleitung
Garmin
Garmin GPSMAP 190-01120-00 Bedienungsanleitung
Thuraya
Thuraya SatSleeve Bedienungsanleitung
Humminbird
Humminbird 532162-1_B Bedienungsanleitung