Furuno GP1650 Series Montage- und Bedienungsanleitung

12/30/1999

OPERATOR’S MANUAL

ADDENDUM

Model: GP1650/1850 Series

Subject:New FISHING MODE and

Feature Enhancements

This Furuno GP1650/1850 Series Plotter

has a newly developed software revision

that includes many exciting new features.

This addendum is a supplement to your

Operator’s Manual. It describes these new

features and explains how to utilize them.

TABLE OF CONTENTS

A. Explanation of New Features…………………….………….… 2

B. Operator’s Manual Information………………….…………….. 3

C. Software Revision Check……………………….………..……. 3

D. New Fishing Modes and Mark Function…………………….… 5

E. New Memory Card Storage Function………………………….. 8

F. Navionics “Nav-Chart”Cartography “OFFSET” Capability…11

G. RTCM DGPS Data Output(1650/1850 “D”/”DF” ONLY)……12

H. New “Wide-Screen” E/S Mode(1650/1850 “F”/”DF” ONLY)..13

A. Explanation of New Features:

1. New "Fishing Plotter Mode": This feature allows you to place your

GP1650/1850 in either a "Pleasure Mode" or a "Fishing Mode". In

the "Pleasure Mode", the GP1650/1850 operates the same as

previous software revisions.

In the new Fishing Mode, you can place Marks and Line Points (Up

To 5000) in internal memory. The mode also allows you to change

Track Colors, Start/Stop Own Ship Tracking, and Edit Mark Entries

easily from a newly added Softkey Menu. In “Pleasure Mode”, this

new Softkey Menu is not displayed.

2. New "Memory Card Storage" Capability: It is now possible to

store Marks/Lines, Waypoints/Routes, Tracks, and Configuration

Information (Menu Settings) of the GP1650/1850 Series onto a

memory card. The entire memory contents of a GP1650/1850 can be

stored into a single memory card for storage or cloning your

GP1650/1850. This provision allows Unlimited Data Storage for the

GP1650/1850 Series. Uploading/Downloading Waypoint

information via the RS232 PC Interface has remained unchanged.

The part number for the RAM Storage Card is 000-140-483. It is

available from any authorized Furuno Dealer.

3. RTCM DGPS Data Output: It is now possible to send RTCM 104,

Differential Correction Data, to other Differential-Ready GPS

Products on your vessel. This feature requires a "D" or ”DF” version.

4. Navionics Cartography "OFFSET" Capability: This new

software allows operators to OFFSET Navionics Charts. Previous

software versions did not have this capability.

5. "Wide-Screen" Echo Sounder Mode: When operating in the “Split

Screen” mode (Plotter and Sounder display), this function allows the

user to select between the wide (50%) or narrow (25%) sounder

screen. This feature requires a “F” or “DF” version.

B. Operator’s Manual – The Operator’s Manual included with your

GP1650/1850 is not updated at this time. We will offer revised

Operator’s Manuals late in the first quarter of 2000.

Please call your authorized Furuno Dealer for further information.

This software revision does not effect the Installation Manual included

with your GP1650/1850.

C. Software Revision Check (For Confirmation Only) - The

Software Revision of your GP1650/1850 can be found by using the “Self

Test” procedure on page 4.

The “Memory I/O” test will display the software revision number in the

upper left corner of the display.

The last two digits of the number indicate which software version is

currently installed.

If your revision number is lower than the ones listed below, a simple

software upgrade for any GP1650/1850 is all that is necessary to take

advantage of the new features available.

Call your local Furuno Dealership for more information.

-GP1650/GP1650D Software Version 145-1801-013 and higher

-GP1650F/GP1650DF Software Version 145-1802-011 and higher

-GP1850D Software Version 145-1826-006 and higher

-GP1850DF Software Version 145-1827-006 and higher

Diagnostic Tests

Memory, I/O port test

Thistestconductsageneralcheckofthedis-

play unit and the antenna unit. The unit dis-

plays the results for each device or

componentcheckedasOKorNG(No Good).

1.Press the [MENU] key to open the main

menu.

2.Press the soft key CONFIGURATION to

show the configuration menu.

CONFIG

DGPS 3D

SETUP NMEA PORT 1

UPLOAD/DOWNLOAD DATA

SETUP NMEA/DGPS PORT 2

SYSTEM MENU

RETURN

Figure 12-1 Configuration menu

3.Press the soft key SYSTEM MENU to

open the system menu.

SYSTEM

DGPS 3D

SELF TEST

MEMORY CLEAR

DEMONSTRATION MODE

RETURN

Figure 12-2 System menu

4.Press the soft key SELF TESTto open

the test menu.

TEST

DGPS 3D

MEMORY•I/O TEST

TEST PATTERN

KEYBOARD TEST

RETURN

REMOTE CONTROLLER TEST

Figure 12-3 Test menu

5.Press the soft key MEMORY•I/O TEST

to start the test.Test results and program

nos. are shown as below.

PROGRAM: OK

No. (LOOK HERE)

RETURN

TEST

SRAM: OK

DRAM: OK

PORT1: OK

PORT2: OK

INTERNAL

BATTERY: OK

GPS

RECEIVER: OK

No.(Doesn't Matter)

BEACON

RECEIVER: OK

No.(Doesn't Matter)

No.

NOTE: Special connections are required to check PORT1

and PORT2 otherwise, "--" appears.

Figure 12-4 Memory, I/O test results

6.The test runs continuously. To return to

the self test menu, press the soft key

RETURN.

Note: BEACON RECEIVER results only ap-

pear on GP-1650/1850 "D" and "DF"Ver.

Changing Operation Mode

Operation mode can be changed between

PLEASURE and FISHING. FISHING mode

provides mark/line entries on the PLOTTER

display. Up to 5000 Marks can be entered

together with track points. Apportioning

between track and mark memory can be

changed by menu. Pressing the [HIDE/

SHOW]key changesthefunction ofsoftkeys.

Holding tracks, changing track color, select-

ing mark colors, and the type of marks/lines

can be performed by the soft keys directly.

1.Press the [MENU] key and the soft key

DISPLAYOPTIONS. The display setup1

menu appears.

DGPS 3D

DISPLAY

SETUP1

RETURN

EDIT

RNG & BRG MODE

RANGE/SPEED UNIT

DEPTH UNIT

TEMP UNIT

LAT/LON DISPLAY

TIME DISPLAY

WAYPOINTS SW

COURSE VECTOR

BEARING

MAG VARIATION

TD DISPLAY

POSITION DISPLAY

SET GO TO METHOD

OPERATION MODE

RHUMB LINE

nm / kt

ftF

DD MM.MMM'

24 HOUR

AUTO2

LINE

MAGNETIC

AUTO 01.3 E

LORAN C

LAT/LON

1 POINT

PLEASUREs

Display setup1 menu

2.Press ▼to select OPERATION MODE.

3.Press the soft key EDIT to show the OP-

ERATION MODE window.

OPERATION MODE

▲

'PLEASURE

▼

™FISHING

OPERATION MODE window

4.Press ▲ or ▼to select PLEASURE or

FISHING.

5.Pressthe soft keyENTERorthe [ENTER]

key to finish.

In the FISHING mode, pressing the [HIDE/

SHOW]keychanges the function of soft keys

as follows.

DGPS 3D NAV

WPT

MARK

ENTRY

TRACK

COLOR

HOLD

COURSE

QP<01>

135 12.345’ E

34 12.345’ N SPD

CSE 16.3kt

245.8

DGPS 3D NAV

WPT

AUTO

C.U.

ZOOM

OUT

ZOOMIN

COURSE

QP<01>

135 12.345’ E

34 12.345’ N SPD

CSE 16.3kt

245.8

DGPS 3D

COURSE

QP<01>

MARK

EDIT

Press the [HIDE/SHOW] key.

135 12.345’ E

34 12.345’ N SPD

CSE 16.3kt

245.8

QP<01>

DGPS 3D

Press the [HIDE/SHOW] key.

Changing displays by Scrolling

MARKS

1Entering Marks

Select the Fishing Mode to enable entry of

marks on the PLOTTER display. Select the

location desired with the cursor, or turn off

the cursor to enter the mark at own ship po-

sition. Pressing the [HIDE/SHOW] key changes

the function of soft keys. Press the soft key

MARK ENTRYto enter a new mark. The mark

is entered in the shape and color selected

from the MARK SHAPE and MARK COLOR

selection windows.

2Changing Mark Attributes

Youcan select the shapes, line typesand colors

of Marks and Lineson the TRACK display.

1.Press the [HIDE/SHOW] key to show the

soft key MARK EDIT.

2.Press the soft key MARK EDIT to show

the MARK/LINE window.

MARK SHAPE

MARK LINE

MARK COLOR YELLOW

MARK/LINE window

3.Press the soft key MARK SHAPE to

change mark shape, the soft key MARK

LINE to change mark line, or the soft key

MARK COLOR to change mark color.

Mark shape

Press the soft key MARK SHAPE to dis-

play the MARK SHAPE window. Press▲

or▼to select mark shape desired.

MARK SHAPE

▲



™

▼

'™

MARK SHAPE window

Mark line

Press the soft key MARK LINE to display

the MARK LINE window. Press ▲or▼to

select mark line desired.

MARK LINE

▲



™

▼

MARK LINE window

Mark color

Press the soft key MARK COLOR to dis-

play the MARK COLOR window. Press

▲or▼to select mark color desired.

MARK COLOR

▲



™

▼

'RED

YELLOW

GREEN

LIGHTBLUE

PURPLE

BLUE

WHITE

MARK COLOR window

4.Pressthe soft keyENTERorthe [ENTER]

key.

5.Press the soft key RETURN to finish.

Marks/lines entered hereafter are inscribed

in the shape, color and line type selected

here.

3Changing Mark Size

Mark size can be selected from STD (stan-

dard) and SMALL.

1.Pressthe[MENU]keytodisplay the main

menu.

2.Press the soft key CHART SETUPOP-

TIONS.

3.Press the soft key CHARTDETAILto

open the CHART DETAILmenu.

DGPS 3D

CHART

DETAIL

RETURN

EDIT

CNTOUR

LINE

LAT/LON GRID

TEXT INFO

WAYPOINT

WAYPOINT NAME

INDEX

LANDMASS

BACKGROUND

NAV AIDS

SECTOR INFO

OTHER SYMBOLS

MARK SIZE

GREEN

LARGE

BRT YELLOW

BLUE

OFF

WHITE

STD

CHART DETAILmenu

4.Press ▼to select MARK SIZE.

5Press the soft key EDIT.

6.Press ▲or ▼to select STD (standard) or

SMALL.

7.Press the [ENTER] key.

4Erasing Marks

Erasing individual marks/lines

1.Operate the cursor pad to place the cur-

sor on the mark you want to erase.

2.Press the [CLEAR] key. The mark se-

lected is erased.

Note: To erase a line, place the cursor

on the edge of the line. The line segment

will be erased.

Erasing whole marks/lines

You can erase all marks and lines. Be abso-

lutely sure you want to erase all marks and

lines; erased marks and lines cannot be re-

stored.

1.Pressthe [MENU] key followedbythesoft

keys CHARTSETUP OPTIONS and

TRACK CONTROL.

2.Press the soft key ERASE MARK. You

are asked if you are sure to erase all

marks and lines.

3.Pressthe [ENTER] key to erase, orpress

the [CLEAR] key to escape.

5Displaying Track and

Mark Points

Number of track and mark points used ap-

pears in the TRACK STATUS window on the

TRACK CONTROLdisplay. For further de-

tails see TRACK CONTROL WINDOW.

SAVING AND LOADING DATA

TO/FROM MEMORYCARDS

The following data can be saved to memory

card:

• Mark/line

• Waypoints/routes

• Track

• Configration (menu settings)

1Formatting Memory Cards

Before you can use a memory card it must

be formatted. Note that formatting always

erases all saved data on the card!

1.Insert the memory card you want to for-

mat into the slot.

2.Pressthe [MENU] key followedbythesoft

keys CONFIGRATION and UPLOAD/

DOWNLOAD DATA.

DGPS 3D

SAVE

DATA

EDIT

FORMAT

TRACK

MARK/LINE

WAYPOINT/ROUTE

CONFIGURATION

OFF

RETURN

SAVE

DATA

SAVE DATA display

3.Press the soft key SAVE DATATO

MEMORYCARD and the soft key FOR-

MAT.You are asked if you are ready to

format the memory card.

4.Pressthe [ENTER] keytoformat (or press

the [CLEAR] key to escape). Now FOR-

MATTING MEMORYCARD appears. Do

not remove the card while it is being for-

matting. When the formatting is com-

pleted,FORMATCOMPLETED appears.

5.Pressthe[ENTER]keytofinish. Now you

can record data to the memory card.

2Saving Data to Memory

Card

Thememory cardcansave fouritemsof data;

track,mark/line, waypoint/route and configu-

ration.

Saving data

1.Insert a formatted memory card into the

slot.

2.Pressthe [MENU] key followedbythesoft

keys CONFIGURATION and UPLOAD/

DOWNLOAD DATA.

3.Press the soft key labeled SAVE DATA

TO MEMORYCARD. The SAVE DATA

display appears.

4.Press ▲or ▼to select item to save.

5.Press the soft key EDIT to open the

TRACK, MARK/LINE, WAYPOINTS/

ROUTES or CONFIGRATION window.

6.Press ▲to select ON.

7.Pressthe soft keyENTERorthe [ENTER]

key.

8.Repeat from steps 4 to 7 to save other

data if desired.

9.Press the soft key SAVE DATA. The fol-

lowing message appears and saving

starts. Do not remove the memory card

while data is being saved.

NOW SAVING DATA TO

MEMORY CARD. DO NOT

TURN OFF THE POWER UNTIL

SAVING COMPLETED.

SAVE DATA message

When saving is completed, COM-

PLETE SAVING DATAappears.

10.Press the [ENTER] key.

Error message

Memory card not inserted

Pressthe[ENTER] key to return to the SAVE

DATAdisplay.

MEMORY CARD NOT

INSERTED. INSERT CARD

PRESS "ENTER" key

TO CONTINUE.

NOT INSERTED message

Unformatted memory card

Pressthe[ENTER] key to return to the SAVE

DATAdisplay. And format it refering to the

previous page.

MEMORY CARD NOT

FORMATTED

PRESS "ENTER" key

TO CONTINUE.

NOT FORMATTED message

Wrong card inserted

Appearswhen a chart card is inserted. Press

the[ENTER] key to return to the SAVEDATA

display. Replace it with a formatted memory

card.

WRONG CARD INSERTED.

INSERT MEMORY CARD.

PRESS "ENTER" key

TO CONTINUE.

WRONG CARD message

Data overwrite

Data type to be recorded exists on memory

card. (Two or more of same data type can-

not be recorded.) Press the [ENTER] key to

overwrite same data type on the card, or

press the [CLEAR] key to escape.

OVERWRITE FOLLOWING

DATA. OK?

YES... "ENTER" key

NO... "CLEAR" key

(TRACK)

OVERWRITE message

3Loading Data from

Memory Card

Data(track,marks,waypoints,configuration)

can be loaded from a memory card and dis-

played on the screen. This feature is useful

for observing past data and setting up the

equipment for a specific purpose (with “con-

figuration”).

1.Pressthe [MENU] key followedbythesoft

keys CONFIGURATION and UPLOAD/

DOWNLOAD DATA.

2.Press the soft key LOAD DATAFROM

MEMORYCARDtoshowtheLOADDATA

display.

DGPS 3D

LOAD

DATA

EDIT

TRACK

MARK/LINE

WAYPOINT/ROUTE

CONFIGURATION

OFF

RETURN

LOAD

DATA

LOAD DATA display

3.Press ▲or ▼to select item to load.

4.Press the soft key EDIT to show the

ON/OFF selection window.

5.Press ▲to select ON. Press the soft key

ENTER or the [ENTER] key. If the

memory card does not contain the item

selected,thebuzzersoundsandONcan-

not be selected.

6.After you select all items desired, press

thesoftkey LOAD DATAto load data.The

following message appears.

NOW LOADING DATA FROM

MEMORY CARD. DO NOT

TURN OFF THE POWER UNTIL

LOADING COMPLETE.

LOAD DATAmessage

After loading is completed, the following

message appears.

COMPLETE LOADING DATA.

PRESS "ENTER" KEY

TO CONTINUE.

COMPLETE message

7.Press the [ENTER] key.

Note on loading data

Track

Since loaded track data is added to internal

track, oldest track will be erased when the

track memory capacity is exceeded.

Waypoint/route

The loaded data OVERWRITES previously

stored waypoints and routes. BE CAREFUL NOT TO DESTROY VALUABLE DATA!

Mark/line

The loaded data is added to internal data.

Whenthemark/line memory becomes full no

marks may be entered.

Configuration

The loaded data replaces current configura-

tion settings. Press the [ENTER] key to re-

start. If the memory card is ejected while

loading or data could not be loaded, press

the [ENTER] key to restart with default set-

tings. Note that track memory capacity is not

saved or loaded.

Andere Handbücher für GP1650 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Furuno Marine-GPS-System Handbücher

Furuno

Furuno 1834C Handbuch

Furuno

Furuno GP-1610CF Bedienungsanleitung

Furuno

Furuno GP-1850F Bedienungsanleitung

Furuno

Furuno GP-32 Bedienungsanleitung

Furuno

Furuno Precision PG-500 Bedienungsanleitung

Furuno

Furuno GP-1800F Bedienungsanleitung

Furuno

Furuno FELCOM 250 Bedienungsanleitung

Furuno

Furuno FELCOM 16 Bedienungsanleitung

Furuno

Furuno GD-3100 Bedienungsanleitung

Furuno

Furuno LC-90 Mark-II Bedienungsanleitung

Furuno

Furuno FELCOM 12 Bedienungsanleitung

Furuno

Furuno GP-1670F Bedienungsanleitung

Furuno

Furuno GP1650 Series Bedienungsanleitung

Furuno

Furuno FM-3000 Gebrauchsanweisung

Furuno

Furuno GP-1610CF Handbuch

Furuno

Furuno GD-1700C Bedienungsanleitung

Furuno

Furuno GP-50 Bedienungsanleitung

Furuno

Furuno GP-7000F Bedienungsanleitung

Furuno

Furuno ECDIS FEA-2100 Technisches Handbuch

Furuno

Furuno GP-1650WDF Bedienungsanleitung

Furuno

Furuno GP-1850WD Bedienungsanleitung

Furuno

Furuno GP-1810 Bedienungsanleitung

Furuno

Furuno 2100 Technisches Handbuch

Furuno

Furuno NAVpilot-500 Bedienungsanleitung

Beliebte Marine-GPS-System Handbücher anderer Marken

JRC

JRC JHS-183 Bedienungsanleitung

Thuraya

Thuraya IP Voyager Bedienungsanleitung

Raytheon

Raytheon NautoPilot NP 5100 Bedienungsanleitung

Garmin

Garmin GPSMAP 8008 MFD Bedienungsanleitung

Iridium

Iridium Pilot Bedienungsanleitung

Beam

Beam Terra 800 Bedienungsanleitung

Sailmon

Sailmon E4 Bedienungsanleitung

AUTOHELM

AUTOHELM ST50 PLUS Bedienungsanleitung

ASTRO

ASTRO X-5 twin B Bedienungsanleitung

Garmin

Garmin GPS 16 Series Referenzhandbuch

Iridium

Iridium EXTREME Bedienungsanleitung

Satcube

Satcube Ku Bedienungsanleitung

Thuraya

Thuraya ATLAS IP+ Bedienungsanleitung

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Bedienungsanleitung

METRACKCO

METRACKCO SVT600/T1/T3 Bedienungsanleitung

Garmin

Garmin GPSMAP 190-01120-00 Bedienungsanleitung

Thuraya

Thuraya SatSleeve Bedienungsanleitung

Humminbird

Humminbird 532162-1_B Bedienungsanleitung