Furuno GP-1850DF Handbuch

Turning the Power On/Off

Press and hold down the [POWER/BRILL]

switch.

Adjusting Tone and

Brilliance

1. Pressthe[POWER/BRILL]keywithatouch-

and-release action.

2. Press the appropriate soft key or cursor pad

to adjust.

♦PLOTTER♦

DGPS 3D NAV

WPT

COURSE

ZOOM

OUT

ZOOMIN

NORTH

135°12.345’ E

34°12.345’ N SPD

CSE 16.3kt

245.8°

BRIDGE

FISH

002WP

Nav information

window

Course bar Functions for

soft key

Track

Own ship

mark

Current display mode

(north-up)

Icon (alarm)

GPS status

Waypoint name

Waypoint mark

Typical indications on the plotter display

Displaying Electronic

Chart at Power Up

Insert mini chart card in slot and turn on the

power.

Selecting Nav Data

Displays

Press the soft key NAV L/L(WPT, S/C).

Changing Chart Scale

Press the soft key [ZOOM IN] to enlarge;

[ZOOM OUT] to shrink.

Turning the Cursor On/Off

Cursor On: Operate the cursor pad.

Cursor Off: Press the soft key [CENTER].

Shifting the Cursor

Operate the cursor pad.

Shifting the Display

Press and hold down the cursor pad.

COLOR DGPS/PLOTTER/SOUNDER GP-1850DF

COLOR GPS/PLOTTER/SOUNDER GP-1850F

Operator’s Guide

The purpose of this operator's guide is to provide the basic operating procedures for this equipment.

For detailed information, refer to the operator's manual.

Returning Own Ship to

Screen Center

Press the soft key CENTER.

Changing the Plot Interval

1. Press the [MENU] key to show the main

menu.

2. PressthesoftkeyCHARTSETUPOPTIONS

to show the chart setup options menu.

CHART

SETUP

DGPS 3D

CHART OFFSET

CHART DETAILS

TRACK CONTROL

RETURN

3. Press the soft key TRACK CON-

TROL.

4. Press ▲or ▼to select TIME INTERVAL or

DIST INTERVAL.

5. Press the soft key EDIT.

6. Key in the interval desired.

Entering Mark

1. Press the [MENU] key and the soft key DIS-

PLAY OPTIONS.

2. Press ▼to select OPERATION MODE.

3. Press the soft key EDIT.

4. Press ▼to select FISHING.

5. Press the soft key ENTER or the [ENTER]

key.

6. Press the PLOT key to display the plotter

display.

7. Press the [HIDE/SHOW] key to display the

soft key MARK ENTRY.

8. Press the soft key MARK ENTRY.

When the cursor is displayed, a mark which its

shape and color are presetted is entered to

cursor position. When the cursor is not dis-

played, a mark is entered to own ship position.

Themark attributes can be changed by the soft

key MARK EDIT.

Stopping, Restarting

Recording of Track

1. Press the [MENU] key.

2. Press the soft key CHART SETUP OP-

TIONS.

3. Press the soft key TRACK CONTROL.

4. Press the soft key STOP TRACK. NOT

TRACKINGindication appears at the bottom

of the display.

To restart recording, press the soft key START

TRACK.

Entering Waypoints at

Own Ship Position

Press the [SAVE/MOB] key with a touch-and-

release action.

Entering Waypoints By

Cursor

1. Press the [WPT/RTE] key.

2. Press the soft key WAYPOINTS.

3. PressthesoftkeyWAYPOINTBYCURSOR

to show the plotter display.

4. Operate the cursor to place the cursor on

the position you want to enter the waypoint.

5. Press the soft key NEW WPT.

6. Press the soft key SAVE.

Registering Routes

1. Press the [WPT/RTE] key.

2. Press the soft key ROUTES.

3. Press the soft key NEW ROUTE.

4. Press the soft key LOCAL LIST or ALPHA

LIST.

5. Press ▲or ▼to select a waypoint.

6. Press the soft key ADD WPT.

7. Repeat step 5-7.

8. Press the soft key SAVE.

Setting Destination by

Waypoint Number

1. Place the cursor on the waypoint you want

to go on the plotter display.

2. Press the soft key GO TO WPT.

Cancelling Destination

1. Press the [WPT/RTE] key.

2. Press the soft key LOG.

3. Press ▲or▼to select the waypoint desired.

4. Press the soft key STOP.

5. Press the [ENTER] key to select YES on the

confirmation window.

6. Press the soft key RELEASE to show the

confirmation window.

7. Press the [ENTER] key to select YES.

Setting Arrival Alarm

1. Press the [ALARM] key to show the alarm

menu.

DGPS 3D

ALARM1

EDIT

CLEAR

ALARM

ALARM INFORMATION

AUDIO ALARM

ARRIVAL ALARM

ANCHOR ALARM

PROXMTY ALARM

XTE ALARM

SPEED ALARM

ON 0.100nm

ON 0.050nm

ON 0.100nm

OVER/UNDER

12.5 ~ 15.0kt

NO ALARM

PAGE

2. Select ARRIVALALARM.

3. Press the soft key EDIT

4. Press ▲or ▼ to select ON.

5. Key in the alarm range.

6. Press the soft key ENTER.

Silencing audible alarm: [CLEAR] key.

Disabling alarm: Select OFF at step 3 above.

♦SOUNDER♦

SNDR

FUNC

SHIFT

GAIN

RANGE

SOUNDER

135° 12.345’E

34° 12.345’N SPD

CSE 16.3kt

245.8°

MODE/

FREQ

50k

DGPS 3D

Nav information

window

Color

bar

Functions for

soft key

Variable

Range

Marker

(White) Depth scale

Tx frequency

GPS status Depth

Temp.

scale

Water

temp.

graph

Water

temp.

display

54.0m

Typical indications on

normal video sounder display

Showing the Sounder

Display

Press the [SNDR] key.

Each pressing of this key toggles the display

amongPlotter/Sounder display,Normal sounder

display and Dual-frequency display.

Selecting the Sounder

Display Mode

1. On the normal display, press the soft key

SNDR FUNC.

2. Select the mode desired.

3. Press the soft key RETURN.

Automatic Sounder

Operation

1. On the normal or dual-frequency display,

press the soft key MODE/FREQ. When the

plotter/sounderdisplay isdisplayed,press the

soft key SNDR, and then press the soft key

MODE/FREQ.

2. Select AUTO.

3. Press the soft key RETURN.

Manual Sounder

Operation

1. On the normal or dual-frequency display,

press the soft key MODE/FREQ. When the

plotter/sounderdisplay isdisplayed,press the

soft key SNDR, and then press the soft key

MODE/FREQ.

2. Select MANUAL.

3. Press the soft key RETURN.

Adjusting the gain

Press the soft key GAIN, and then press ▲or

▼to set the gain.

Selecting range

Press the soft key RANGE, and then press ▲

or ▼to select range.

Shifting the basic range

Press the soft key SHIFT, and then press ▲or

▼to shift the basic range.

Suppressing Interference

1. Press the [MENU] key, and then press the

soft key SOUNDER SETUP OPTIONS to

open the sounder setup menu.

DGPS 3D

SOUNDER

SETUP

NOISE LIMITER

CLUTTER

WHITE MARKER

HUE

SIGNAL LEVEL

PICTURE ADVANCE

EDIT

HOLD

EDIT

RANGE

SETUP

SYSTEM

SETUP

RETURN

OFF

1/1

2. Press ▲or ▼ to select NOISE LIMITER.

3. Press the soft key EDIT.

3. Press ▲or ▼ to select NL1, NL2 or NL3.

4. Press the soft key RETURN.

Suppressing Low Level

Noise

1. Press the [MENU] key, and then press the

soft key SOUNDER SETUP OPTIONS to

show the sounder setup menu.

2. Press ▲or ▼to select CLUTTER.

3. Press the soft key EDIT.

4. Press ▲or ▼to select clutter rejection level.

5. Press the soft key RETURN.

Selecting Picture Advance

Speed

1. Press the [MENU] key, and then press the

soft key SOUNDER SETUP OPTIONS to

show the sounder setup menu.

2. Press▲or ▼to select PICTUREADVANCE.

3. Press the soft key EDIT.

4. Press ▲or ▼to select speed.

5. Press the soft key RETURN.

Activating Sounder Alarms

1. Press the [ALARM] key, and then press the

soft key NEXT PAGE to show the alarm 2

menu.

DGPS 3D

ALARM2

EDIT

CLEAR

ALARM

ALARM INFORMATION

BOTTOM ALARM

FISH (B/L) ALARM

FISH (NORMAL)

TEMP. ALARM

OFF

NO ALARM

RETURN

2. Press ▲or ▼ to select the alarm among

BOTTOM, FISH (B/L), FISH (NORMAL) and

TEMP. (temperature).

3. Press the soft key EDIT.

4. Press ▲or ▼to select on, and then key in

the range to set.

5. Press the soft key ENTER.

PUB.NO.OSE-43950-D

(0005,TATA) GP-1850F/1850DF

Andere Handbücher für GP-1850DF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Furuno Marine-GPS-System Handbücher

Furuno

Furuno FELCOM 12 Bedienungsanleitung

Furuno

Furuno FELCOM 250 Bedienungsanleitung

Furuno

Furuno FM-3000 Gebrauchsanweisung

Furuno

Furuno FELCOM 250 Bedienungsanleitung

Furuno

Furuno GP-1670F Bedienungsanleitung

Furuno

Furuno 1724C Bedienungsanleitung

Furuno

Furuno GP-7000F Bedienungsanleitung

Furuno

Furuno FELCOM 12 Bedienungsanleitung

Furuno

Furuno GP-1850W Bedienungsanleitung

Furuno

Furuno GP-1871F Bedienungsanleitung

Furuno

Furuno GP-70 Mark-2 Handbuch

Furuno

Furuno GP-3500F-D Bedienungsanleitung

Furuno

Furuno GP-1850W Bedienungsanleitung

Furuno

Furuno FMD3100 Bedienungsanleitung

Furuno

Furuno GP-3500F Bedienungsanleitung

Furuno

Furuno GP-1610CF Bedienungsanleitung

Furuno

Furuno Navpilot 500 Bedienungsanleitung

Furuno

Furuno 1734C Bedienungsanleitung

Furuno

Furuno GP1650 Series Montage- und Bedienungsanleitung

Furuno

Furuno SC-33 Bedienungsanleitung

Furuno

Furuno GP-1650WDF Bedienungsanleitung

Furuno

Furuno Navpilot 500 Handbuch

Furuno

Furuno GP-1650W Bedienungsanleitung

Furuno

Furuno GD-3300 Bedienungsanleitung

Beliebte Marine-GPS-System Handbücher anderer Marken

JRC

JRC JHS-183 Bedienungsanleitung

Thuraya

Thuraya IP Voyager Bedienungsanleitung

Raytheon

Raytheon NautoPilot NP 5100 Bedienungsanleitung

Garmin

Garmin GPSMAP 8008 MFD Bedienungsanleitung

Iridium

Iridium Pilot Bedienungsanleitung

Beam

Beam Terra 800 Bedienungsanleitung

Sailmon

Sailmon E4 Bedienungsanleitung

AUTOHELM

AUTOHELM ST50 PLUS Bedienungsanleitung

ASTRO

ASTRO X-5 twin B Bedienungsanleitung

Garmin

Garmin GPS 16 Series Referenzhandbuch

Iridium

Iridium EXTREME Bedienungsanleitung

Satcube

Satcube Ku Bedienungsanleitung

Thuraya

Thuraya ATLAS IP+ Bedienungsanleitung

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Bedienungsanleitung

METRACKCO

METRACKCO SVT600/T1/T3 Bedienungsanleitung

Garmin

Garmin GPSMAP 190-01120-00 Bedienungsanleitung

Thuraya

Thuraya SatSleeve Bedienungsanleitung

Humminbird

Humminbird 532162-1_B Bedienungsanleitung