Furuno FAX-410 Handbuch

FACSIMILE RECEIVER FAX-410

Operator’s Guide

The purpose of this Operator’s Guide is to provide the basic operating procedures for this

equipment. For more detailed information see the Operator’s Manual.

Control Description Control Description

POWER Turn power on or off. IOC Choose IOC (Index of Coopera-

tion).

VOLUME Adjust volume of receive signal. RCD Start and stop recording.

SYNC Fine tune the phasing signal. C • Clear data in setting mode.

• Switch from setting mode to

standby mode.

PRG • Enable a setting mode (in com-

bination with numeric key).

• Return to previous screen in a

setting mode.

E Confirm setting.

FRQ • Change from channel mode to

frequency mode.

• Set frequency in frequency

mode.

2 Raise channel in channel mode,

or raise frequency in frequency

mode.

DIM Adjust backlight of LCD, in four

levels.

4 Manual phasing (leftward) in

recording. Each press shifts the

recording leftward by 2.5% of the

paper width.

CH • Change from frequency mode

to channel mode.

• Set channel in channel mode.

5 Display date and time.

SPD Choose recording speed. 6 Manual phasing (rightward) in

recording. Each press shifts the

recording rightward by 2.5% of

the paper width.

REV • Reverse recording format

(from black on white to white

on black and vice versa).

• Enter decimal point in fre-

quency.

8 Lower channel in channel mode,

or lower frequency in frequency

mode.

PRG FRQ 123

DIM CH 456

SPD REV 789

IOC RCD C 0 E

TUNE

TIMER

RCD

VOLUME SYNC

POWER

OFF

FACSIMILE RECEIVER FAX-410

PRG FRQ 123

DIM CH 456

SPD REV 789

IOC RCD C 0 E

TUNE

TIMER

RCD

VOLUME SYNC

POWER

OFF

FACSIMILERECEIVER FAX-410

Automatic Receiving

1. Press the CH key to show the channel

display.

2. Press the Sor Tkey to choose channel

desired.

Manual Receiving

1. Press the CH key to show the channel

display.

2. Press the Sor Tkey to choose channel

desired.

3. Press the RCD key to start receiving.

Stopping Receiving

Press the RCD key.

Timer Reception

Registering timer programs

1. Press the PRG key and the 2key.

2. Press the 4key.

3. Use the Sor Tkey to choose timer pro-

gram number.

4. Enter a channel number and then press

the Ekey to confirm number.

5. Set the day of the week which to receive

the program, using the Sor Tkey.

Choose the asterisk (*) to get a broad-

cast daily.

6. Press the Ekey.

7. Enter start and end time, in 24-hour

notation, using the numeric keys.

8. Press the Ekey. (The start and end

times should be two minutes before and

after actual time respectively to allow for

detection of the start and stop signals.)

Choosing timer programs for timer

reception

1. Press the PRG key and the 2key.

2. Press the 2key.

3. Use the Sor Tkey to choose timer pro-

gram number and press the Xkey.

4. To choose another program, repeat step

5. After choosing all programs necessary,

press the Ekey.

C000 JMH 3622.5

S120 I576

TIMER RCV : 1-OFF

2-ON 3-RCL 4-STR

STORE TIMER REG

SET REG NO. 0-F

R1 SET CHANNEL

No. in 3 FIGURES

R1 C000 SET DAY

of THE WEEK by ST

R1 C000 MON

SET START/STOP

TIMER RCV : 1-OFF

2-ON 3-RCL 4-STR

SET REG No. 0-F

PUSH S/T&X& E KEY

TIMER RCV NO.: 4

0123

OSE-62610-A

Andere Handbücher für FAX-410

Andere Furuno Empfänger Handbücher

Furuno

Furuno BBWX2 Bedienungsanleitung

Furuno

Furuno Navtex Receiver NX-500 Bedienungsanleitung

Furuno

Furuno FAX-207 Bedienungsanleitung

Furuno

Furuno Weather Satellite Receiver SU18 Handbuch

Furuno

Furuno FAX-214 Benutzerhandbuch

Furuno

Furuno BBWX1 Produkthandbuch

Furuno

Furuno FA-30 Bedienungsanleitung

Furuno

Furuno NX-300-D Bedienungsanleitung

Furuno

Furuno RC-1800T Bedienungsanleitung

Furuno

Furuno RV-107 Bedienungsanleitung

Furuno

Furuno DSC Receiver AA50 AA50R HF Bedienungsanleitung

Furuno

Furuno AA-45B Bedienungsanleitung

Furuno

Furuno FA-30 Bedienungsanleitung

Furuno

Furuno RV-107 Bedienungsanleitung

Furuno

Furuno Navtex NX-700-B Bedienungsanleitung

Furuno

Furuno Navtex NX-700-A Bedienungsanleitung

Furuno

Furuno GP-170 Bedienungsanleitung

Furuno

Furuno MF/HF DSC/Watch Receiver DSC-60 Bedienungsanleitung

Furuno

Furuno Navtex NX-700-B Bedienungsanleitung

Furuno

Furuno GV-86 Bedienungsanleitung

Furuno

Furuno FA-40 Bedienungsanleitung

Furuno

Furuno eRideOPUS 6 Bedienungsanleitung

Furuno

Furuno RC-1800T Bedienungsanleitung

Furuno

Furuno MF/HF DSC/Watch Receiver DSC-60 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung