Gastops Ltd.
C009423, Rev. 4 page 4
All use of this publication and ChipCHECK by user shall be subject to the restrictions and conditions as set out in this publication.
2.0 Health and Safety
2.1 Operational Safety
CAUTION – USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION – PRIOR TO ANY USE, THE EQUIPMENT MUST BE INSPECTED FOR ANY DAMAGE
(INCLUDING BUT NOT LIMITED TO DENTS, IMPACT MARKS, DEFORMATIONS IN PANELS, ETC.) FAILURE
TO DO SO MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. IF DAMAGE IS OBSERVED, UNPLUG
THE EQUIPMENT AND CONTACT THE MANUFACTURER IMMEDIATELY.
To ensure safe and proper use of the ChipCHECK system, Users of ChipCHECK must be aware of and
adhere to all safety precautions and procedures as discussed herein. Users shall use this section to
become acquainted with the specific safety features included with ChipCHECK system.
Laser Parameters:
Product Laser Classification
Beam Diameter (at aperture)
NOTE:
•Never use or operate the equipment without full understanding and compliance with this
Operator Manual.
•This Laser Product is designated as Class 1 during all procedures of operation.
•There is no scheduled maintenance required to keep the product in compliance.
•Refer to Section 6.0 for the allowable User maintenance.
•There is absolutely NO SERVICE ALLOWED by the User. There are no User serviceable parts.
•This equipment is to be serviced or repaired only by Gastops authorized technicians.
•The User is not allowed to attempt to alter, interfere, modify, remove, circumvent, defeat or
de-active any safety features or interlocks (see Section 2.2.2 and Figure 2-1 & 2-6).
•The User is strictly forbidden from reverse-engineering, altering, interfering, modifying,
removing, circumventing, or de-activing any part of the equipment.
•Never remove any labels or remove any covers.
