Gateway 7250R Bedienungsanleitung

A MAN US 7250R RACKMOUNT GDE R0 4/00 7250R

Server Rackmount

Installation Guide

Contents

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Conventions used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Information about your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Accessing the server system manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Getting additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installing the system drawer side rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the cabinet mounting brackets and mounting rails . . . . . . . . . . . . . . . . . . 3

Installing Gateway mounting brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installing the cabinet mounting rails onto Gateway brackets . . . . . . . . . . . . . . . 4

Installing generic mounting brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the cabinet mounting rails onto generic brackets . . . . . . . . . . . . . . . . 7

Mounting the system drawer in the cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing the cable retractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing a cable retractor in a Gateway cabinet . . . . . . . . . . . . . . . . . . . . . . . 12

Installing a cable retractor in a non-Gateway cabinet . . . . . . . . . . . . . . . . . . . 13

Attaching the cables to the retractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Completing the connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting a single system drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting multiple system drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Turning on the system drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Turning off the system drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Securing the system drawer in the cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8506163.book Page i Wednesday, May 10, 2000 11:40 AM

Notices

4545 Town Centre Court

San Diego, CA 92121 USA

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or

transmitted by any means or in any form, without prior consent in writing from Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes

are made periodically. These changes are incorporated in newer publication editions. Gateway may improve

and/or change products described in this publication at any time. Due to continuing system improvements,

Gateway is not responsible for inaccurate information which may appear in this manual. For the latest product

updates, consult the Gateway Web site at www.gateway.com. In no event willGateway be liable for direct, indirect,

special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual,

even if advised of the possibility of such damages.

Intheinterestofcontinuedproductdevelopment,Gatewayreservestheright tomakeimprovements inthismanual

and the products it describes at any time, without notices or obligation.

Trademark acknowledgments

AnyKey, black-and-white spot design, CrystalScan, Destination, EZ Pad, EZ Point, Field Mouse, Solo, TelePath,

Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are registered trademarks and

GATEWAY, Gateway Profile, Gateway Solo, Gateway Astro, green stylized GATEWAY, green stylized Gateway

logo, and the black-and-white spotted box logo are trademarks of Gateway, Inc. Intel, Intel Inside logo, and

Pentium are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and

Windows are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned

herein are used for identification purposes only, and may be the trademarks or registered trademarks of their

respective companies.

8506163.book Page ii Wednesday, May 10, 2000 11:40 AM

Conventions used in this manual iii

Preface

Conventions used in this manual

Throughout this manual, you will see the following conventions:

Convention Description

ENTER Keyboard key names are printed in small capitals.

CTRL+ALT+DEL A plus sign means to press the keys at the same time.

Setup Commands to be entered, options to select, and messages that

appear on your monitor are printed in bold.

User’s Guide Names of publications are printed in italic.

Important A note labeled important informs you of special

circumstances.

Caution A caution warns you of possible damage to equipment or

loss of data.

Warning A warning indicates the possibility of personal injury.

8506163.book Page iii Wednesday, May 10, 2000 11:40 AM

Information about your system

Accessing the server system manual

A comprehensive 7250R Server System Manual is located on the

Server Companion CD, which accompanied this system. To access this

document (in PDF format), place the 7250R Companion CD into the CD drive

on a system running a Windows-based operating system, then follow the

instructions on the Welcome screen. To get the latest updates to your system

documentation, visit the technical support area of www.gatewayatwork.com.

Getting additional information

Visit the technical support area of www.gatewayatwork.com to find

information about your system or other Gateway products. Some types of

information you can access are:

■Hardware driver and program updates

■Technical tips

■Service agreement information

■Technical documents and component information

■Frequently asked questions (FAQs)

■Documentation for peripherals or optional components

■Online technical support

8506163.book Page iv Wednesday, May 10, 2000 11:40 AM

Installation

This guide provides information on installing your Gateway server in a third

party cabinet. The rackmount accessory kit includes:

■2 pairs of generic mounting brackets (short and long)

■2 28-inch (71.12 cm) cabinet slide rail assemblies

■1 cable retractor assembly

■Assorted size screws

■Miscellaneous hardware

If you are installing the system drawer in a Gateway rack cabinet, you will

need a separate mounting kit. The Gateway rackmount accessory kit (Part

Number: 2509860) includes:

■2 pairs of Gateway mounting brackets (labeled FRONT and REAR)

■2 Gateway 28-inch (71.12 cm) cabinet slide rail assemblies

■1 cable retractor assembly

■Assorted size screws

■Miscellaneous hardware

If you intend to install the 7250R Server in a Gateway rack cabinet and you

did not receive the Gateway rackmount accessory kit, contact client care to

get the correct accessory kit.

8506163.book Page 1 Wednesday, May 10, 2000 11:40 AM

2Installation

Installing the system drawer side rails

Before installing the server (system drawer) in the cabinet, you need to install

the system drawer side rails on the server.

To install the system drawer side rails:

1Remove the system drawer side rails from the cabinet mounting rails by

depressing the retention clips on the inside of the system drawer side

rails, then sliding the rails off.

2Mount the system drawer side rail on the server using three screws from

the accessory kit. Make sure the retention clips are toward the back of

the server.

3Mount the second rail on the opposite side of the server.

Retention clip

System drawer

side rail

Retention clip

8506163.book Page 2 Wednesday, May 10, 2000 11:40 AM

Installing the cabinet mounting brackets and mounting rails 3

Installing the cabinet mounting

brackets and mounting rails

If you are installing the server in a Gateway cabinet, refer to the following

section. If you are installing the server in a non-Gateway cabinet, go to

“Installing generic mounting brackets” on page 5.

Installing Gateway mounting brackets

If Gateway mounting brackets are already installed in the cabinet, go to

“Installing the cabinet mounting rails onto Gateway brackets” on page 4.

To install the Gateway mounting brackets in the cabinet:

1If you received a mounting template with your cabinet, use it to locate

the exact position of the cabinet mounting brackets.

2Position the front mounting bracket (labeled FRONT) on the front

vertical mounting rail.

3Attach the front mounting bracket to the front vertical mounting rail

using two screws from the accessory kit.

Back mounting

bracket

Front vertical

mounting rail

Front mounting

bracket Back vertical

mounting rail

8506163.book Page 3 Wednesday, May 10, 2000 11:40 AM

4Installation

4Position the back mounting bracket (labeled REAR) on the back vertical

mounting rail.

5Attach the back mounting bracket to the back vertical mounting rail

using two screws from the accessory kit.

6Mount the second set of brackets on the opposite side of the cabinet by

repeating Steps 2 through 5.

Installing the cabinet mounting rails onto

Gateway brackets

To install the cabinet mounting rails onto Gateway brackets:

1Align the back end of the cabinet mounting rail to the back mounting

bracket by sliding the inner rail forward (if the spring latch locks the inner

rail into place, free the rail by releasing the spring latch).

2Attach the back end of the cabinet mounting rail to the back mounting

bracket using a screw from the accessory kit.

Front vertical

mounting rail

Spring latch

Back vertical

mounting rail

Back mounting

bracket

Inner rail

Front mounting

bracket

8506163.book Page 4 Wednesday, May 10, 2000 11:40 AM

Installing the cabinet mounting brackets and mounting rails 5

3Align the front of the cabinet mounting rail to the front mounting

bracket by sliding the inner rail and inner slide until the rail screw hole

opening lines up with one of the front mounting bracket screw holes.

4Attach the front of the cabinet mounting rail to the front mounting

bracket using a screw from the accessory kit.

5Attach the second screw to the front mounting bracket by repeating

Steps 3 and 4.

6Mount the second cabinet mounting rail on the opposite side of the

cabinet by repeating Steps 1 through 5.

7Go to “Mounting the system drawer in the cabinet”on page 9.

Installing generic mounting brackets

If you are installing the server in a non-Gateway cabinet, use the generic

mounting brackets. These brackets allow for different cabinet depths. If

generic mounting brackets are already installed in the cabinet, go to

“Installing the cabinet mounting rails onto generic brackets”on page 7.

Spring latch

Back mounting

bracket

Inner rail

Front mounting

bracket

Screw

8506163.book Page 5 Wednesday, May 10, 2000 11:40 AM

Andere Handbücher für 7250R

Inhaltsverzeichnis

Andere Gateway Server Handbücher

Gateway

Gateway GT350 F1 Bedienungsanleitung

Gateway

Gateway 7450R Bedienungsanleitung

Gateway

Gateway E-9220T Bedienungsanleitung

Gateway

Gateway ALR 7300 Montageanleitung

Gateway

Gateway ALR 8200R Bedienungsanleitung

Gateway

Gateway ALR 9200 Montageanleitung

Gateway

Gateway E-9425R Bedienungsanleitung

Gateway

Gateway E-9425R Bedienungsanleitung

Gateway

Gateway 6400 Benutzerhandbuch

Gateway

Gateway 960 Bedienungsanleitung

Gateway

Gateway ALR 8300 Montageanleitung

Gateway

Gateway 910 Series Benutzerhandbuch

Gateway

Gateway 7250R Benutzerhandbuch

Gateway

Gateway E-9520T Bedienungsanleitung

Gateway

Gateway 9415 Bedienungsanleitung

Gateway

Gateway 8450R Benutzerhandbuch

Gateway

Gateway 8400 Benutzerhandbuch

Gateway

Gateway 930 series Benutzerhandbuch

Gateway

Gateway E-9722R Bedienungsanleitung

Gateway

Gateway GT150 F1 Bedienungsanleitung

Gateway

Gateway E-9232T Bedienungsanleitung

Gateway

Gateway E-9525R Bedienungsanleitung

Gateway

Gateway ALR 8200 Montageanleitung

Gateway

Gateway 9315 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung