GE Phasor XS Bedienungsanleitung
GE
Inspection Technologies
Phasor XS™
Quick Reference Guide
021-247-407, rev. 2
©2008 General Electric Company.
All rights reserved. We reserve the right to technical modications without prior notice.
g
2
2
Guide to the Keypad
-- Mode Selector: Phased Array or Conventional Operating Modes•
• -- View Select: Frame and/or A-Scan
• -- Gain Increment/Decrement: Press and hold to change between
digital and analog gain
• -- ZOOM View: Expand the display to entire screen
Press again to return to normal view mode
• -- Home Key: Returns the instrument to the phased array
or conventional Home Menu. If held for 3 seconds, automatically
performs a focal law calculation
• -- Freeze Key: Freezes the displayed image(s). If held for 3 seconds,
automatically generates and stores a report
2
23
Guide to the Keypad cont...
• -- Power Key: On and off
• -- Test Key: Switches from Home to Knob Menu
Function Rotary Knob – Rotate the right-hand knob to change the value of •
the selected function.
Gain Rotary Knob – Rotate the left-hand knob to change the instrument’s •
gain.
4
4
Setting Up
Press•
Press• to choose between PHASED ARRAY and
CONVENTIONAL
Set units of measurement and operating language by •
pressing to activate the CONFIG menu. Then activate the
REGIONAL submenu. Press next to UNITS or LANGUAGE and
turn the Function Knob to adjust.
4
45
Other basic features to adjust are accessed as follows •
Date – • CONFIG then STARTUP
Time – • CONFIG then STARTUP
Display Brightness – • CONFIG then STARTUP
Background Color – • DISPLAY then BACKGRND
Amplitude Color Palette – • DISPLAY then IMAGE
Date and Time Format – • CONFIG then REGIONAL
6
6
Connecting a Probe
Move the connector release lever to the open (left) position. Attach the
phased array probe connector the front of the instrument so that the
connector’s attached cable points upward. Then move the release
lever to the right.
connector
release knob
Orient connector with
cable pointing up
Phased Array
Probe Port
6
67
Conguring for a Probe and Wedge
Access the probe and wedge settings by pressing to activate the
PROBE menu. Then activate the PRB GEO submenu. Press next to
FREQUENCY, or NUMBER of ELEMENT, or PITCH to input values printed
on the probe body. Other probe and wedge features are adjusted as
follows:
Probe Part Number – • PROBE then PRB DAT
Probe Serial Number – • PROBE then PRB DAT
Wedge Part Number – • PROBE then WDGE DAT
Wedge Serial Number – • PROBE then WDGE DAT
Wedge Velocity – • PROBE then WDGE GEO
8
8
Conguring for a Probe and Wedge
Access the probe and wedge settings by pressing to activate the
PROBE menu. Wedge features are adjusted as follows:
Wedge Offset Z – • PROBE then WDGE GEO (user measured
from Probe Index Point to contact surface – set to 0 when no
wedge is installed)
Wedge Angle – • PROBE then WDGE GEO ( user measured
wedge angle – set to 0 when no wedge is installed)
Wedge Front – • PROBE then WDGE GEO (user measured
from Probe Index Point to wedge’s front edge – required to use
the origin offset feature)
Origin Offset – • PROBE then OFFSET (user measured from
wedge’s front edge to the target)
8
89
Conguring for a Probe and Wedge
10
10
Conguring for a Probe and Wedge
Markings on the probe body indicate the location of element 1 and the
direction that additional elements are arranged. To dene the
orientation of the probe’s elements with respect to the wedge’s
geometry, access PROBE menu then WDGE DAT submenu.
Inhaltsverzeichnis
Andere GE Messgerät Handbücher
GE
GE Multilin DDFR Bedienungsanleitung
GE
GE PM880 Bedienungsanleitung
GE
GE UV-1 Bedienungsanleitung
GE
GE RHM 30 Bedienungsanleitung
GE
GE Optica Bedienungsanleitung
GE
GE Mentor Visual iQ CCF28 Bedienungsanleitung
GE
GE DINAMAP ProCare Bedienungsanleitung
GE
GE SEER 1000 Bedienungsanleitung
GE
GE RHM 03 Bedienungsanleitung
GE
GE WiMAX WX-I210+c Installationsanleitung
GE
GE DigitalFlow GF868 Benutzerhandbuch
GE
GE DPI 610 IS Bedienungsanleitung
GE
GE Multilin EPM 6010 Bedienungsanleitung
GE
GE AquaTrans AT600 Bedienungsanleitung
GE
GE DigitalFlow GS868 Betriebsanleitung
GE
GE DigitalFlow GF868 Betriebsanleitung
GE
GE RHM 40 Bedienungsanleitung
GE
GE DMS Go Bedienungsanleitung
GE
GE Phasor CV Bedienungsanleitung
GE
GE CB Watch 3 Bedienungsanleitung
