GE Druck DPI611 Bedienungs- und Wartungsanleitung

Measurement & Control

Druck DPI611

Portable Pressure Calibrator

Safety and Quick Start Guide –K0565

DPI611: Pressure Calibrator (Figure 1)

Maximum Operating Pressure: As stated on Range

Label at the back side of Calibrator.

Over pressure limited to 1.5 × MWP

Note: MWP is based on Unit pressure range

Operating Temperature Range:

-10 °C to +50 °C (+14 °F to +122 °F)

+10 °C to +30 °C (optimized calibration specification)

0 °C –40 °C with optional mains power supply

Storage Temperature: -20 °C to +70 °C (-4 °F to +158 °F)

Humidity: 0 to 90 % Relative Humidity (RH)

Non-condensing

Power Supply: 100 –260 V +/-10 %, 50 / 60 Hz AC,

Output DC V=5 A, 1.6 A, CATII of IEC60364-4-443

Pressure Ranges:

+/-1 barg (-14.5 to 15 psig)

-1 to 2 barg (-14.5 to 30 psig)

-1 to 7 barg (-14.5 to 100 psig)

-1 to 10 barg (-14.5 to 150 psig)

-1 to 20 barg (-14.5 to 300 psig)

Accuracy 10 °C to 30 °C, 1 yr. 0.025 % FS

Add 0.001 % FS/°C outside 10 °C to 30 °C

Altitude: Up to 2000 m

Pollution Level: Degree 2

Batteries (Primary): 8 × AA Alkaline

*Caution: To prevent damage to the DPI611, only use

it within the specified pressure limit on the label.

Trademarks

All product names are trademarks of their respective companies.

Customer service

Visit our web site: www.ge-mcs.com

International Language Index:

ENGLISH ........................................................................................ EN

FRENCH ......................................................................................... FR

GERMAN ........................................................................................ DE

ITALIAN ............................................................................................IT

SPANISH .........................................................................................ES

PORTUGUESE .................................................................................PT

RUSSIAN ........................................................................................RU

CHINESE ........................................................................................ZH

GREEK.............................................................................................EL

CZECH............................................................................................ CS

DANISH..........................................................................................DA

HUNGARIAN ..................................................................................HU

LITHUANIAN ...................................................................................LT

LATVIAN..........................................................................................LV

SWEDISH ....................................................................................... SV

DUTCH ........................................................................................... NL

NORWEGIAN ................................................................................ NO

POLISH............................................................................................PL

TURKISH .........................................................................................TR

ROMANIAN ....................................................................................RO

JAPANESE .......................................................................................JP

KOREAN.........................................................................................KO

Figure 2

Figure 1

910 11

VIEW A

Measurement & Control

[EN] English –K0565 Issue 1 Safety and Quick start guide 1

PARTS LIST

MATERIALS

Table 1: Materials

Item

Description

ON or OFF button; See “Quick Reference”.

Pump mechanism.

Pneumatic volume adjuster.

Test port: To attach the device under test; See Figure 2.

Pneumatic pressure release valve to release pressure

in the system.

CH1 connectors for: Voltage (V); Current (mA+, mA-);

Switch operation.

Isolated CH2 connectors for: Voltage (V); 24 V loop

power supply (24 Vo).

Liquid Crystal Display (LCD): Color display with touch-

screen. To make a selection, lightly tap on the

applicable display area.

+5 V DC power input socket. This supply also charges

the optional battery pack.

USB type A connector for connections to external

peripherals (USB flash memory or optional external

modules).

USB mini-type B connector for communication with a

computer.

Material of wetted parts

Aluminum, Brass, Stainless Steel,

Nitrile and Polyurethane seals,

PTFE, Acetal, Nylon.

Material of enclosure and

controls

Polycarbonate, Polyamide,

Polypropylene, Acrylic, Cotton.

Safety and Quick start guide 2[EN] English –K0565 Issue 1

DPI611 PRESSURE DATA

Table 2: Pressure Data

Range

+/-1 barg (-14.5 to 15 psig)

-1 to 2 barg (-14.5 to 30 psig)

-1 to 7 barg (-14.5 to 100 psig)

-1 to 10 barg (-14.5 to 150 psig)

-1 to 20 barg (-14.5 to 300 psig)

Pressure Leak rates:

Vacuum Leak rates:

7 bar and above = 10 mbar/min

< 7 bar = 5 mbar/min

QUICK REFERENCE

Before using this instrument, read and understand the “Safety” section.

It is dangerous to ignore the specified warnings.

This instrument is intended for indoor use only.

GENERAL WARNINGS

It is dangerous to ignore the specified limits for the instrument or to

use the instrument when it is not in its normal condition. Use the

applicable protection and obey all safety precautions.

Do not use the instrument in locations with explosive gas, vapor or

dust. There is a risk of an explosion.

Measurement & Control

[EN] English –K0565 Issue 1 Safety and Quick start guide 3

ELECTRICAL WARNINGS

To prevent electrical shocks or damage to the instrument, do not

connect more than 30 V between the terminals, or between the

terminals and the ground (earth).

This instrument uses standard AA size batteries. To prevent an

explosion or fire, do not short circuit.

To prevent battery leakage or heat generation, only use the power

supply in the temperature range 0 to 40 °C (32 to 104 °F).

PRESSURE WARNINGS

Some liquid and gas mixtures are dangerous. This includes mixtures

that occur because of contamination. Make sure that the equipment is

safe to use with the necessary media.

To prevent a dangerous release of pressure, isolate and bleed the

system before you disconnect a pressure connection.

To prevent a dangerous release of pressure, make sure that all the

related pipes, hoses and equipment have the correct pressure rating,

are safe to use and are correctly attached.

Always wear appropriate eye protection when working with pressure.

Safety and Quick start guide 4[EN] English –K0565 Issue 1

CAUTIONS

To prevent damage to the display, do not use sharp objects on the

touch-screen.

Removal of power without appropriately shutting down the DPI611 can

lead to loss of date and time; if it happens re-set the date and time

upon re-start.

1. OVERVIEW:

This is a battery-powered instrument for

electrical measure and source operations. You

can use the touch-screen to display the different

parameters. The DPI611 instrument measures

and displays Pneumatic Pressure/ Vacuum

generated by the instrument. In addition it can

measure / source electrical signals.

2. STANDARD EQUIPMENT:

These items are part of the standard equipment

with the DPI611 Calibrator.

Removable Pressure Adaptors ISO 228/1,

(G1/8 and 1/8 NPT Female)

Set of 4 electrical test leads

Safety and Quick Start Guide

3. SAFETY:

Before you use the instrument, make sure that

you read and understand all the related data.

This includes: the applicable local safety

procedures, the user manual and the

instructions for the accessories / options /

equipment you are using it with.

Figure 3

Measurement & Control

[EN] English –K0565 Issue 1 Safety and Quick start guide 5

4. INSTALLATION:

Before you start:

Read and understand the “Safety” section.

Do not use damaged equipment.

Note: Use only original parts supplied by the manufacturer.

4.1 Electrical Connections

See Figure 1 (View A).

4.2 External pressure connections

See Figure 2. Use an applicable method to seal the external

pressure connections, and then tighten to the applicable torque.

Maximum torque: ISO 228/1, 1/8 NPT: 35 Nm (26 lbf.ft)

ISO 228/1, G1/8: 25 Nm (18.4 lbf.ft)

Attach the pressure adaptor to the DPI611 and tighten to finger

tight.

4.3 Maintenance

Clean the case with a moist, lint-free cloth and a weak detergent.

Do not use solvents or abrasive materials.

Return the instrument to the manufacturer or an approved service

agent for all repairs. Refer to the user manual.

If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be

impaired.

Do not dispose of this product as household waste. Use an

approved organization that collects and/or recycles waste

electrical and electronic equipment. For more information, contact:

Our customer service department:

(Contact us at www.ge-mcs.com).

Safety and Quick start guide 6[EN] English –K0565 Issue 1

5. DPI611 PRESSURE CALIBRATOR-START OPERATIONS:

Install the Battery (See Figure 4)

1. Remove the battery cover by unscrewing the Retaining screw (B)

and lifting the cover upwards.

2. Remove old batteries and dispose off in accordance with local

instructions.

3. Place the new batteries in the battery compartment with the

correct +/–orientation.

4. Replace the battery cover by locating the lugs inside the slots (A)

and bring down the cover and tighten Retaining screw (B).

Note: Use of secondary or rechargeable batteries will give

Inaccurate battery life indications.

Figure 4

Measurement & Control

[EN] English –K0565 Issue 1 Safety and Quick start guide 7

6. BASIC MODES:

Power ON

From OFF –momentarily press the power button until the GE logo

appears.

Power OFF

Press and Release the Power Button:

Select SWITCH OFF from the POWERDOWN OPTIONS window

displayed.

Figure 6

Note: 1. SWITCH OFF can also be achieved by Pressing and holding

the power button until the screen is blank.

2. Use Power OFF to preserve the battery capacity when the

instrument is not in use for extended periods of time.

Standby Mode

Press and Release Power button:

Select GO TO STANDBY from the POWERDOWN OPTIONS window

displayed.

Note: Use Standby mode between the jobs to provide a quick start-

up.

Power up from Standby Mode

When powered up from the standby mode, instrument always

opens the last screen shown before going to standby mode.

Power ON/OFF

Figure 5

Safety and Quick start guide 8[EN] English –K0565 Issue 1

7. DASHBOARD NAVIGATION:

The application DASHBOARD allows quick selection of the

appropriate function without menus or special keys. The

DASHBOARD displays icons representing the functional

applications of the DPI611, for example, the CALIBRATOR

application. Touch the appropriate icon to start the application.

When more choices are available than shown on the display, for

example, menu lists, swipe a finger up or down, left or right to

scroll.

Figure 7

1) Swipe from right to left 2) Touch the TASK menu 3) Touch the TASK.

Figure 8

Andere Handbücher für Druck DPI611

Inhaltsverzeichnis

Andere GE Prüfgeräte Handbücher

GE POWER-BREAK TAK-TS1 Bedienungsanleitung

GE ADTS552F Bedienungsanleitung

GE Druck DPI612 Bedienungsanleitung

GE Druck DPI 610 Bedienungsanleitung

GE Druck ADTS 405 R/F Mk2 Bedienungsanleitung

GE Druck ADTS 2 Series Gebrauchs- und Pflegehandbuch

GE Druck PC6-IDOS Bedienungsanleitung

GE FAT Bedienungsanleitung

GE Druck DPI 880 Bedienungsanleitung

GE Druck DPI612 Bedienungsanleitung

GE MicroVersaTrip TVTS1 Bedienungsanleitung

GE TVRMS2 Series Bedienungsanleitung

GE Druck DPI 832 Bedienungsanleitung

GE PK-2 Bedienungsanleitung

GE XL VU Bedienungsanleitung

GE Druck UPS-III Bedienungsanleitung

GE ADTS 405F Mk2 Einrichtungshandbuch

GE Druck DPI 610 Bedienungsanleitung

GE Druck DPI 150 Bedienungsanleitung

GE Druck DPI 821 Bedienungsanleitung

GE EVT-Pro 2.0 Bedienungsanleitung

GE PACE5000 Gebrauchs- und Pflegehandbuch

GE Druck DPI 832 Bedienungsanleitung

GE EVT-Pro Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung